[PATCH] Support for HP DL165g6 Fam10

[Arne Georg Gleditsch]

Hi,

Attached is a patch implementing support for the HP DL165g6 mainboard
(with fam10 CPUs).  It is based on the code for the DL145 and
SerialICE-observation of the vendor ROM.  It touches
superio/serverengines/pilot/pilot_early_init.c, which is also used by
the DL145 board.  I belive the changes to be harmless, but it would be
good if someone with the board in hand could check it out.

As seems to also be the case with the DL145 board, the Matrox VGA ROM
needs to be loaded by SeaBIOS.

Signed-off-by: Arne Georg Gleditsch

[Stefan Reinauer]

On 5/26/10 11:55 AM, Arne Georg Gleditsch wrote:
> Hi,
>
> Attached is a patch implementing support for the HP DL165g6 mainboard
> (with fam10 CPUs).  It is based on the code for the DL145 and
> SerialICE-observation of the vendor ROM.  It touches
> superio/serverengines/pilot/pilot_early_init.c, which is also used by
> the DL145 board.  I belive the changes to be harmless, but it would be
> good if someone with the board in hand could check it out.
>
> As seems to also be the case with the DL145 board, the Matrox VGA ROM
> needs to be loaded by SeaBIOS.
>
> Signed-off-by: Arne Georg Gleditsch

I tried compiling this with HEAD and I get

HOSTCC coreboot-builds/sharedutils/romcc/romcc (this may take a while)
ROMCC mainboard/hp/dl165_g6_fam10/bootblock.inc
romcc_io.h:88.37:
pci_mmio_read_config8 undeclared
make: ***
[coreboot-builds/hp_dl165_g6_fam10/mainboard/hp/dl165_g6_fam10/bootblock.inc]
Error 1

[Arne Georg Gleditsch]

Stefan Reinauer  writes:
> I tried compiling this with HEAD and I get
>
> HOSTCC coreboot-builds/sharedutils/romcc/romcc (this may take a while)
> ROMCC mainboard/hp/dl165_g6_fam10/bootblock.inc
> romcc_io.h:88.37:
> pci_mmio_read_config8 undeclared
> make: ***
> [coreboot-builds/hp_dl165_g6_fam10/mainboard/hp/dl165_g6_fam10/bootblock.inc]
> Error 1

If you compile it without the mmconf patch in, you probably need to
toggle MMCONF_SUPPORT_DEFAULT to "n" in the Kconfig file.