[LinuxBIOS] [PATCH] improve M57SLI PCI support

[Torsten Duwe]

As started in 
http://www.linuxbios.org/pipermail/linuxbios/2007-October/025385.html ,
but change all apparantly related values that differ on my board with legacy 
BIOS.

This makes both PCI cards appear, as well as the firewire device TSB43AB23.
* PCI 01:07.0 appears fully functional
* PCI 01:08.0 (closer to the board edge) appears, but no interrupts
* PCI 01:0a.0 (FireWire) untested

Since none of these was even present without the patch I suggest to apply it.

Signed-off-by: Torsten Duwe

[Harald Gutmann]

Am Sonntag, 28. Oktober 2007 00:43:39 schrieb Torsten Duwe:
> As started in
> http://www.linuxbios.org/pipermail/linuxbios/2007-October/025385.html ,
> but change all apparantly related values that differ on my board with
> legacy BIOS.
>
> This makes both PCI cards appear, as well as the firewire device TSB43AB23.
> PCI 01:07.0 appears fully functional

it is.
> PCI 01:08.0 (closer to the board edge) appears, but no interrupts

i also tested before to patch it for the gpio 39 the value which works for 
gpio 38, and it "works" like you said.
> PCI 01:0a.0 (FireWire) untested
>
> Since none of these was even present without the patch I suggest to apply
> it.
>
> Signed-off-by: Torsten Duwe

regards,
harald

[Carl-Daniel Hailfinger]

On 28.10.2007 00:43, Torsten Duwe wrote:
> As started in 
> http://www.linuxbios.org/pipermail/linuxbios/2007-October/025385.html ,
> but change all apparantly related values that differ on my board with legacy 
> BIOS.
>
> This makes both PCI cards appear, as well as the firewire device TSB43AB23.
> PCI 01:07.0 appears fully functional
> PCI 01:08.0 (closer to the board edge) appears, but no interrupts
> PCI 01:0a.0 (FireWire) untested
>
> Since none of these was even present without the patch I suggest to apply it.
>
> Signed-off-by: Torsten Duwe

Acked-by: Carl-Daniel Hailfinger

Commited in r2921.

Carl-Daniel