When you try building by setting different mainboards, are you running make
distclean between those attempts? If not, you can easily wind up with a
.config where settings and options aren't appropriate for your board.
For your Sapphire system, the AMD Bettong board might be close enough to
get you started. If you want to give it a shot, you can try the
following. Make sure you have some method for reflashing your original
BIOS, of course, because this probably won't work initially.
1) Create a .config file using the following
2) Run make olddefconfig
3) I've assumed the board's two serial connectors are connected to the APU
and not on a SuperIO (CONFIG_HUDSON_UART=y). Unfortunately, the Merlin
Falcon binaryPI has a "feature" that prevents this from working. Ricardo
has an easy workaround to allow the UART to function. Cherry-pick the
On Sun, Jan 29, 2017 at 5:50 PM, giuseppe.ferrigni--- via coreboot <
Hello to all,
I'm getting confidence with coreboot for the first time. I followed
instruction in the "Lesson1" article for a very basic build and everything
gone well. Now I'm trying to build coreboot for a real board (amd
ipc_fp4_dp not present in current release) but setting several mainbord
devices results in different errors. One of these is the following:
cbfs_add_entry: Assertion '' !IS_TOP_ALIGNED_ADDRESS(content_offset)'
Due to lack of tutorial to understand the coreboot structure, can someone
help me to understand why the building process fail?
coreboot mailing list: coreboot(a)coreboot.org