RE: Filo Error Help

[YhLu]

FILO in TWO CPU version LinuxBIOS works well S2885 in LANL and my lab.

So I still suggest that you get another CPU to verify the whole process.

Regards

YH
  _____

From: David Aubin [mailto:[e-mail]] 
Sent: Tuesday, July 13, 2004 12:40 PM
To: ron minnich
Cc: Takeshi Sone; YhLu; Hendricks David W.; LinuxBIOS
Subject: Re: Filo Error Help

That's interesting.  Too small?  Uncompressed it is:
ls -la :
8192000 2004-07-13 15:37 initrd

I have my ram disk set to 65536.  I made it bigger just to be sure.
Are you saying the initrd and the ramdisk_size must be equal?

If so then this would explain why Yhlu's and my elf's did not work.
I'll try an exact ramdisk_size and initrd.

Thanks,
Dave

On Tue, 2004-07-13 at 15:27, ron minnich wrote: 
On Tue, 13 Jul 2004, David Aubin wrote:
> Thank yo for the image, but oddly it fails exactly the
> same way....
> Found initrd block 0
> crc error

the few times I've seen the crc error is the initrd is configured too 
small. I still think you might have a config problem here.

Put some debug prints in the initrd code and try to zoom in better to 
what's going on.

ron