You need to provide the serial dump logs because I think very little amount of people here has access to the list of FSP post codes for every processor family (may be I am wrong but so far I don't know of someone who has them).
Which coreboot platform are you using?
Sent with [ProtonMail](https://protonmail.com) Secure Email.
‐‐‐‐‐‐‐ Original Message ‐‐‐‐‐‐‐ On Thursday, November 29, 2018 6:09 PM, roman perepelitsin email@example.com wrote:
Hi! I'm try to run Coreboot on Intel Xeon1505L with C236 and DDR4 memory down using kabylake FSP GOLD. I setup UART0 for coreboot console out and try to set UART0 for FSP-M debug out, but have only POST codes to port80/81 from FSP-M. In FSP integration guide I didn't find full POST-codes describe. So - can some body help with this? My lasts post codes: DD46h DD30h DD32h DD35h DD45h DD36h DD37h DD41h DD4Dh DD3fh. I think it MRC codes, but that they mean - don't know. I see in oscilloscope, that DDR try to start in this stage, but after all I have error from FSP-M 80000007h.
-- regards, Perepelitsin Roman