Re: [coreboot] coreboot AMD Cards

[kinky_nekoboi]

the output of sudo dmesg | grep invalid is empty..

but as i said i am currently running this board with the stock
BIOS/UEFI as it is my main desktop.

i have another AMD A8-5500 laying around .. if i can hands on a another
testing board i will test this to.

as i remembered as i logged in via ssh on the testrun with no graphics
output .. the HD7850 was listed in lspci

i will update you with more informations when i am able to.

Am 28.08.2018 um 16:11 schrieb Mike Banon:
> Hi Nekoboi, could you please provide a dmesg kernel log? (after
> removing MAC addresses/serial numbers from it)
> I wonder if it contains the lines like these below:
> amdgpu 0000:04:00.0: Invalid PCI ROM header signature: expecting
> 0xaa55, got 0x0000
> [drm:amdgpu_get_bios [amdgpu]] *ERROR* Unable to locate a BIOS ROM
> amdgpu 0000:04:00.0: Fatal error during GPU init
> ( https://bugs.freedesktop.org/show_bug.cgi?id=101473 )
>
> More system info like lspci -v and lspci -tv could be also helpful to
> resolve a problem.
> Please try to provide as much helpful logs as possible
>
> Best regards,
> Mike Banon
>
> On Tue, Aug 28, 2018 at 2:29 PM kinky_nekoboi
>  wrote:
> > AFAIK the Hardware init of coreboot is somehow based of the linux kernel ?
> >
> > As a Deblobed Kernel like in Debian is not able to detect an AMD card
> > without Amd microcode.. is Coreboot not able to detect AMD Cards without
> > this microcode ?
> >
> > The problem is that i can not get any AMD cards to work with
> > coreboot+Seabios on my F2A85M board.
> >
> > Systeminfo, currently with ASUS UEFI
> >
> > 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
> > [AMD/ATI] Pitcairn PRO [Radeon HD 7850 / R7 265 / R9 270 1024SP]
> > (prog-if 00 [VGA controller])
> >     Subsystem: PC Partner Limited / Sapphire Technology Pitcairn PRO
> > [Radeon HD 7850 / R7 265 / R9 270 1024SP]
> >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > Stepping- SERR- FastB2B- DisINTx+
> >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > <TAbort- <MAbort- >SERR- <PERR- INTx-
> >     Latency: 0, Cache Line Size: 64 bytes
> >     Interrupt: pin A routed to IRQ 43
> >     Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
> >     Region 2: Memory at fea00000 (64-bit, non-prefetchable) [size=256K]
> >     Region 4: I/O ports at e000 [size=256]
> >     Expansion ROM at 000c0000 [disabled] [size=128K]
> >     Capabilities: <access denied>
> >     Kernel driver in use: amdgpu
> >     Kernel modules: radeon, amdgpu
> >
> > System:
> >   Host: thanatos Kernel: 4.17.0-3-amd64 x86_64 bits: 64 compiler: gcc
> >   v: 7.3.0 Desktop: Cinnamon 3.8.8 dm: lightdm 1.18.3
> >   Distro: Debian GNU/Linux buster/sid
> > Machine:
> >   Type: Desktop Mobo: ASUSTeK model: F2A85-M v: Rev X.0x
> >   serial: <root required> BIOS: American Megatrends v: 6402 date:
> > 07/18/2013
> > Memory:
> >   RAM Report: permissions: Unable to run dmidecode. Are you root?
> > PCI Slots:
> >   Permissions: Unable to run dmidecode. Are you root?
> > CPU:
> >   Topology: Quad Core model: AMD A8-6600K APU with Radeon HD Graphics
> >   bits: 64 type: MCP arch: Piledriver rev: 1 L2 cache: 2048 KiB
> >   bogomips: 31355
> >   Speed: 1907 MHz min/max: 1900/3900 MHz boost: enabled Core speeds (MHz):
> >   1: 1909 2: 1909 3: 1906 4: 1903
> >   Flags: 3dnowprefetch abm aes aperfmperf apic arat avx bmi1 clflush cmov
> >   cmp_legacy constant_tsc cpb cpuid cr8_legacy cx16 cx8 de decodeassists
> >   extapic extd_apicid f16c flushbyasid fma fma4 fpu fxsr fxsr_opt ht
> >   hw_pstate ibs lahf_lm lbrv lm lwp mca mce misalignsse mmx mmxext monitor
> >   msr mtrr nodeid_msr nonstop_tsc nopl npt nrip_save nx osvw pae pat
> >   pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold pge pni
> >   popcnt pse pse36 rdtscp rep_good sep skinit ssbd sse sse2 sse4_1 sse4_2
> >   sse4a ssse3 svm svm_lock syscall tbm tce topoext tsc tsc_scale vmcb_clean
> >   vme vmmcall wdt xop xsave
> > Graphics:
> >   Card-1: AMD Pitcairn PRO [Radeon HD 7850 / R7 265 / R9 270 1024SP]
> >   vendor: PC Partner Limited driver: amdgpu v: kernel bus ID: 01:00.0
> >   chip ID: 1002:6819
> >   Display: x11 server: X.Org 1.20.1 driver: amdgpu,ati
> >   unloaded: fbdev,modesetting,vesa
> >   resolution: 1920x1080~60Hz, 1920x1080~60Hz
> >   OpenGL: renderer: AMD Radeon HD 7800 Series (PITCAIRN DRM 3.25.0
> >   4.17.0-3-amd64 LLVM 6.0.1)
> >   v: 4.5 Mesa 18.1.6 compat-v: 3.1 direct render: Yes
> > Audio:
> >   Card-1: AMD FCH Azalia vendor: ASUSTeK F2A85-M Series
> >   driver: snd_hda_intel v: kernel bus ID: 00:14.2 chip ID: 1022:780d
> >   Card-2: AMD Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
> >   vendor: PC Partner Limited driver: snd_hda_intel v: kernel bus ID:
> > 01:00.1
> >   chip ID: 1002:aab0
> >   Sound Server: ALSA v: k4.17.0-3-amd64
> > Network:
> >   Card-1: Intel 82571EB Gigabit Ethernet driver: e1000e v: 3.2.6-k
> >   port: d020 bus ID: 02:00 chip ID: 8086:105e
> >   IF: enp2s0f0 state: up speed: 1000 Mbps duplex: full
> >   mac: 00:24:81:7f:47:c0
> >   IP v4: 10.0.0.88/24 type: dynamic noprefixroute scope: global
> >   broadcast: 10.0.0.255
> >   IP v6: fe80::224:81ff:fe7f:47c0/64 type: noprefixroute scope: link
> >   Card-2: Intel 82571EB Gigabit Ethernet driver: e1000e v: 3.2.6-k
> >   port: d000 bus ID: 02:00.1 chip ID: 8086:105e
> >   IF: enp2s0f1 state: down mac: 00:24:81:7f:47:c1
> >   Card-3: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
> >   driver: r8169 v: 2.3LK-NAPI port: c000 bus ID: 05:00 chip ID: 10ec:8168
> >   IF: enp5s0 state: down mac: 08:60:6e:da:8e:bb
> >   IF-ID-1: virbr0 state: down mac: 52:54:00:ee:6e:d1
> >   IP v4: 192.168.122.1/24 scope: global broadcast: 192.168.122.255
> >   IF-ID-2: virbr0-nic state: down mac: 52:54:00:ee:6e:d1
> >   WAN IP: 94.222.186.234
> > Drives:
> >   Local Storage: total: 1.03 TiB used: 22.00 GiB (2.1%)
> >   ID-1: /dev/sda vendor: A-Data model: SP900 size: 119.24 GiB
> >   speed: 6.0 Gb/s serial: 7E2720008327 temp: 32 C scheme: MBR
> >   ID-2: /dev/sdb vendor: Western Digital model: WD10EZRX-00A8LB0
> >   size: 931.51 GiB speed: 6.0 Gb/s serial: WD-WCC1U0278788 rev: 1A01
> >   temp: 38 C scheme: GPT
> >   Message: No Optical or Floppy data was found.
> > RAID:
> >   Message: No RAID data was found.
> > Partition:
> >   ID-1: / size: 109.30 GiB used: 18.91 GiB (17.3%) fs: ext4 dev: /dev/dm-1
> >   label: N/A uuid: 5c555be5-d883-4cea-bb77-54c6c8cf487a
> >   ID-2: /boot size: 235.3 MiB used: 46.7 MiB (19.9%) fs: ext2 dev:
> > /dev/sda1
> >   label: N/A uuid: d7955e20-0ca7-4dbc-8d27-ef0cfc539dc7
> >   ID-3: /media/sdb1_crypt size: 931.06 GiB used: 3.05 GiB (0.3%) fs: xfs
> >   dev: /dev/dm-3 label: cryptica uuid: 48251097-20b6-4f5a-bfa4-4a614c62a15d
> >   ID-4: /media/smb/data_lg size: 3.64 TiB used: 2.27 TiB (62.4%) fs: cifs
> >   remote: //freedom/data_lg label: N/A uuid: N/A
> >   ID-5: /media/smb/pool size: 3.64 TiB used: 2.27 TiB (62.4%) fs: cifs
> >   remote: //freedom/pool label: N/A uuid: N/A
> >   ID-6: swap-1 size: 7.45 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-2
> >   label: N/A uuid: bebbd4d3-4597-4ecc-935e-13976c0e0fa3
> > Unmounted:
> >   ID-1: /dev/dm-0 size: 119.00 GiB fs: <root required> label: N/A uuid: N/A
> >   ID-2: /dev/sda2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
> >   ID-3: /dev/sda5 size: 119.00 GiB fs: crypto_luks label: N/A
> >   uuid: b3becd23-ac52-44b7-a499-f5c1035e8420
> >   ID-4: /dev/sdb1 size: 931.51 GiB fs: crypto_luks label: N/A
> >   uuid: 7b09e039-080a-4c97-baaa-ef5905c6fc9b
> > USB:
> >   Hub: 1:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
> >   Hub: 2:1 usb: 3.0 type: Full speed (or root) hub chip ID: 1d6b:0003
> >   Hub: 3:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
> >   Hub: 4:1 usb: 3.0 type: Full speed (or root) hub chip ID: 1d6b:0003
> >   Hub: 5:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
> >   Device-1: Lexmark bus ID: 5:4 usb: 2.0 type: Printer chip ID: 043d:0126
> >   Hub: 6:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
> >   Hub: 7:1 usb: 1.1 type: Full speed (or root) hub chip ID: 1d6b:0001
> >   Device-2: Keyboard bus ID: 7:2 usb: 1.1 type: Keyboard chip ID: 258a:1006
> >   Device-3: Logitech M90/M100 Optical Mouse bus ID: 7:3 usb: 2.0 type:
> > Mouse
> >   chip ID: 046d:c05a
> >   Hub: 8:1 usb: 1.1 type: Full speed (or root) hub chip ID: 1d6b:0001
> > Sensors:
> >   System Temperatures: cpu: 24.4 C mobo: N/A gpu: amdgpu temp: 46 C
> >   Fan Speeds (RPM): cpu: 0 gpu: amdgpu fan: 0
> > Repos:
> >   Active apt repos in: /etc/apt/sources.list
> >   1: deb http://ftp.de.debian.org/debian/ buster main contrib non-free
> >   2: deb-src http://ftp.de.debian.org/debian/ buster main contrib
> >   3: deb http://security.debian.org/debian-security buster/updates main
> > contrib non-free
> >   4: deb-src http://security.debian.org/debian-security buster/updates
> > main contrib
> >   5: deb http://ftp.de.debian.org/debian/ buster-updates main contrib
> > non-free
> >   6: deb-src http://ftp.de.debian.org/debian/ buster-updates main contrib
> > Processes:
> >   CPU top: 5
> >   1: cpu: 7.0% command: firefox-esr pid: 7855 mem: 704.6 MiB (8.8%)
> >   2: cpu: 4.3% command: cinnamon pid: 2270 mem: 242.4 MiB (3.0%)
> >   3: cpu: 2.8% command: xorg pid: 907 mem: 163.3 MiB (2.0%)
> >   4: cpu: 1.4% command: thunderbird pid: 7710 mem: 383.5 MiB (4.8%)
> >   5: cpu: 1.0% command: dino-im pid: 7767 mem: 90.5 MiB (1.1%)
> >   Memory top: 5
> >   1: mem: 704.6 MiB (8.8%) command: firefox-esr pid: 7855 cpu: 7.0%
> >   2: mem: 383.5 MiB (4.8%) command: thunderbird pid: 7710 cpu: 1.4%
> >   3: mem: 242.4 MiB (3.0%) command: cinnamon pid: 2270 cpu: 4.3%
> >   4: mem: 163.3 MiB (2.0%) command: xorg pid: 907 cpu: 2.8%
> >   5: mem: 109.5 MiB (1.3%) command: owncloud pid: 2478 cpu: 0.0%
> > Info:
> >   Processes: 223 Uptime: 1h 16m Memory: 7.74 GiB used: 2.15 GiB (27.8%)
> >   Init: systemd v: 239 runlevel: 5 Compilers: gcc: 8.2.0 alt: 7/8
> >   Shell: bash v: 4.4.23 running in: gnome-terminal inxi: 3.0.20
> > lg@thanatos:~$

coreboot AMD Cards

[Mike Banon]

When you'd have another coreboot attempt, please collect these logs
while a coreboot is flashed (especially dmesg, also lspci and whatever
else you'd consider as important) and show to us so that we could help
you . Logs collected while the proprietary UEFI is flashed - do not
matter much
On Tue, Aug 28, 2018 at 7:15 PM kinky_nekoboi
 wrote:
> the output of sudo dmesg | grep invalid is empty..
>
> but as i said i am currently running this board with the stock
> BIOS/UEFI as it is my main desktop.
>
> i have another AMD A8-5500 laying around .. if i can hands on a another
> testing board i will test this to.
>
> as i remembered as i logged in via ssh on the testrun with no graphics
> output .. the HD7850 was listed in lspci
>
> i will update you with more informations when i am able to.
>
> Am 28.08.2018 um 16:11 schrieb Mike Banon:
> > Hi Nekoboi, could you please provide a dmesg kernel log? (after
> > removing MAC addresses/serial numbers from it)
> > I wonder if it contains the lines like these below:
> > amdgpu 0000:04:00.0: Invalid PCI ROM header signature: expecting
> > 0xaa55, got 0x0000
> > [drm:amdgpu_get_bios [amdgpu]] *ERROR* Unable to locate a BIOS ROM
> > amdgpu 0000:04:00.0: Fatal error during GPU init
> > ( https://bugs.freedesktop.org/show_bug.cgi?id=101473 )
> >
> > More system info like lspci -v and lspci -tv could be also helpful to
> > resolve a problem.
> > Please try to provide as much helpful logs as possible
> >
> > Best regards,
> > Mike Banon
> >
> > On Tue, Aug 28, 2018 at 2:29 PM kinky_nekoboi
> >  wrote:
> > > AFAIK the Hardware init of coreboot is somehow based of the linux kernel ?
> > >
> > > As a Deblobed Kernel like in Debian is not able to detect an AMD card
> > > without Amd microcode.. is Coreboot not able to detect AMD Cards without
> > > this microcode ?
> > >
> > > The problem is that i can not get any AMD cards to work with
> > > coreboot+Seabios on my F2A85M board.
> > >
> > > Systeminfo, currently with ASUS UEFI
> > >
> > > 01:00.0 VGA compatible controller: Advanced Micro Devices, Inc.
> > > [AMD/ATI] Pitcairn PRO [Radeon HD 7850 / R7 265 / R9 270 1024SP]
> > > (prog-if 00 [VGA controller])
> > >     Subsystem: PC Partner Limited / Sapphire Technology Pitcairn PRO
> > > [Radeon HD 7850 / R7 265 / R9 270 1024SP]
> > >     Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
> > > Stepping- SERR- FastB2B- DisINTx+
> > >     Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
> > > <TAbort- <MAbort- >SERR- <PERR- INTx-
> > >     Latency: 0, Cache Line Size: 64 bytes
> > >     Interrupt: pin A routed to IRQ 43
> > >     Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
> > >     Region 2: Memory at fea00000 (64-bit, non-prefetchable) [size=256K]
> > >     Region 4: I/O ports at e000 [size=256]
> > >     Expansion ROM at 000c0000 [disabled] [size=128K]
> > >     Capabilities: <access denied>
> > >     Kernel driver in use: amdgpu
> > >     Kernel modules: radeon, amdgpu
> > >
> > > System:
> > >   Host: thanatos Kernel: 4.17.0-3-amd64 x86_64 bits: 64 compiler: gcc
> > >   v: 7.3.0 Desktop: Cinnamon 3.8.8 dm: lightdm 1.18.3
> > >   Distro: Debian GNU/Linux buster/sid
> > > Machine:
> > >   Type: Desktop Mobo: ASUSTeK model: F2A85-M v: Rev X.0x
> > >   serial: <root required> BIOS: American Megatrends v: 6402 date:
> > > 07/18/2013
> > > Memory:
> > >   RAM Report: permissions: Unable to run dmidecode. Are you root?
> > > PCI Slots:
> > >   Permissions: Unable to run dmidecode. Are you root?
> > > CPU:
> > >   Topology: Quad Core model: AMD A8-6600K APU with Radeon HD Graphics
> > >   bits: 64 type: MCP arch: Piledriver rev: 1 L2 cache: 2048 KiB
> > >   bogomips: 31355
> > >   Speed: 1907 MHz min/max: 1900/3900 MHz boost: enabled Core speeds (MHz):
> > >   1: 1909 2: 1909 3: 1906 4: 1903
> > >   Flags: 3dnowprefetch abm aes aperfmperf apic arat avx bmi1 clflush cmov
> > >   cmp_legacy constant_tsc cpb cpuid cr8_legacy cx16 cx8 de decodeassists
> > >   extapic extd_apicid f16c flushbyasid fma fma4 fpu fxsr fxsr_opt ht
> > >   hw_pstate ibs lahf_lm lbrv lm lwp mca mce misalignsse mmx mmxext monitor
> > >   msr mtrr nodeid_msr nonstop_tsc nopl npt nrip_save nx osvw pae pat
> > >   pausefilter pclmulqdq pdpe1gb perfctr_core perfctr_nb pfthreshold pge pni
> > >   popcnt pse pse36 rdtscp rep_good sep skinit ssbd sse sse2 sse4_1 sse4_2
> > >   sse4a ssse3 svm svm_lock syscall tbm tce topoext tsc tsc_scale vmcb_clean
> > >   vme vmmcall wdt xop xsave
> > > Graphics:
> > >   Card-1: AMD Pitcairn PRO [Radeon HD 7850 / R7 265 / R9 270 1024SP]
> > >   vendor: PC Partner Limited driver: amdgpu v: kernel bus ID: 01:00.0
> > >   chip ID: 1002:6819
> > >   Display: x11 server: X.Org 1.20.1 driver: amdgpu,ati
> > >   unloaded: fbdev,modesetting,vesa
> > >   resolution: 1920x1080~60Hz, 1920x1080~60Hz
> > >   OpenGL: renderer: AMD Radeon HD 7800 Series (PITCAIRN DRM 3.25.0
> > >   4.17.0-3-amd64 LLVM 6.0.1)
> > >   v: 4.5 Mesa 18.1.6 compat-v: 3.1 direct render: Yes
> > > Audio:
> > >   Card-1: AMD FCH Azalia vendor: ASUSTeK F2A85-M Series
> > >   driver: snd_hda_intel v: kernel bus ID: 00:14.2 chip ID: 1022:780d
> > >   Card-2: AMD Cape Verde/Pitcairn HDMI Audio [Radeon HD 7700/7800 Series]
> > >   vendor: PC Partner Limited driver: snd_hda_intel v: kernel bus ID:
> > > 01:00.1
> > >   chip ID: 1002:aab0
> > >   Sound Server: ALSA v: k4.17.0-3-amd64
> > > Network:
> > >   Card-1: Intel 82571EB Gigabit Ethernet driver: e1000e v: 3.2.6-k
> > >   port: d020 bus ID: 02:00 chip ID: 8086:105e
> > >   IF: enp2s0f0 state: up speed: 1000 Mbps duplex: full
> > >   mac: 00:24:81:7f:47:c0
> > >   IP v4: 10.0.0.88/24 type: dynamic noprefixroute scope: global
> > >   broadcast: 10.0.0.255
> > >   IP v6: fe80::224:81ff:fe7f:47c0/64 type: noprefixroute scope: link
> > >   Card-2: Intel 82571EB Gigabit Ethernet driver: e1000e v: 3.2.6-k
> > >   port: d000 bus ID: 02:00.1 chip ID: 8086:105e
> > >   IF: enp2s0f1 state: down mac: 00:24:81:7f:47:c1
> > >   Card-3: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
> > >   driver: r8169 v: 2.3LK-NAPI port: c000 bus ID: 05:00 chip ID: 10ec:8168
> > >   IF: enp5s0 state: down mac: 08:60:6e:da:8e:bb
> > >   IF-ID-1: virbr0 state: down mac: 52:54:00:ee:6e:d1
> > >   IP v4: 192.168.122.1/24 scope: global broadcast: 192.168.122.255
> > >   IF-ID-2: virbr0-nic state: down mac: 52:54:00:ee:6e:d1
> > >   WAN IP: 94.222.186.234
> > > Drives:
> > >   Local Storage: total: 1.03 TiB used: 22.00 GiB (2.1%)
> > >   ID-1: /dev/sda vendor: A-Data model: SP900 size: 119.24 GiB
> > >   speed: 6.0 Gb/s serial: 7E2720008327 temp: 32 C scheme: MBR
> > >   ID-2: /dev/sdb vendor: Western Digital model: WD10EZRX-00A8LB0
> > >   size: 931.51 GiB speed: 6.0 Gb/s serial: WD-WCC1U0278788 rev: 1A01
> > >   temp: 38 C scheme: GPT
> > >   Message: No Optical or Floppy data was found.
> > > RAID:
> > >   Message: No RAID data was found.
> > > Partition:
> > >   ID-1: / size: 109.30 GiB used: 18.91 GiB (17.3%) fs: ext4 dev: /dev/dm-1
> > >   label: N/A uuid: 5c555be5-d883-4cea-bb77-54c6c8cf487a
> > >   ID-2: /boot size: 235.3 MiB used: 46.7 MiB (19.9%) fs: ext2 dev:
> > > /dev/sda1
> > >   label: N/A uuid: d7955e20-0ca7-4dbc-8d27-ef0cfc539dc7
> > >   ID-3: /media/sdb1_crypt size: 931.06 GiB used: 3.05 GiB (0.3%) fs: xfs
> > >   dev: /dev/dm-3 label: cryptica uuid: 48251097-20b6-4f5a-bfa4-4a614c62a15d
> > >   ID-4: /media/smb/data_lg size: 3.64 TiB used: 2.27 TiB (62.4%) fs: cifs
> > >   remote: //freedom/data_lg label: N/A uuid: N/A
> > >   ID-5: /media/smb/pool size: 3.64 TiB used: 2.27 TiB (62.4%) fs: cifs
> > >   remote: //freedom/pool label: N/A uuid: N/A
> > >   ID-6: swap-1 size: 7.45 GiB used: 0 KiB (0.0%) fs: swap dev: /dev/dm-2
> > >   label: N/A uuid: bebbd4d3-4597-4ecc-935e-13976c0e0fa3
> > > Unmounted:
> > >   ID-1: /dev/dm-0 size: 119.00 GiB fs: <root required> label: N/A uuid: N/A
> > >   ID-2: /dev/sda2 size: 1 KiB fs: <root required> label: N/A uuid: N/A
> > >   ID-3: /dev/sda5 size: 119.00 GiB fs: crypto_luks label: N/A
> > >   uuid: b3becd23-ac52-44b7-a499-f5c1035e8420
> > >   ID-4: /dev/sdb1 size: 931.51 GiB fs: crypto_luks label: N/A
> > >   uuid: 7b09e039-080a-4c97-baaa-ef5905c6fc9b
> > > USB:
> > >   Hub: 1:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
> > >   Hub: 2:1 usb: 3.0 type: Full speed (or root) hub chip ID: 1d6b:0003
> > >   Hub: 3:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
> > >   Hub: 4:1 usb: 3.0 type: Full speed (or root) hub chip ID: 1d6b:0003
> > >   Hub: 5:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
> > >   Device-1: Lexmark bus ID: 5:4 usb: 2.0 type: Printer chip ID: 043d:0126
> > >   Hub: 6:1 usb: 2.0 type: Full speed (or root) hub chip ID: 1d6b:0002
> > >   Hub: 7:1 usb: 1.1 type: Full speed (or root) hub chip ID: 1d6b:0001
> > >   Device-2: Keyboard bus ID: 7:2 usb: 1.1 type: Keyboard chip ID: 258a:1006
> > >   Device-3: Logitech M90/M100 Optical Mouse bus ID: 7:3 usb: 2.0 type:
> > > Mouse
> > >   chip ID: 046d:c05a
> > >   Hub: 8:1 usb: 1.1 type: Full speed (or root) hub chip ID: 1d6b:0001
> > > Sensors:
> > >   System Temperatures: cpu: 24.4 C mobo: N/A gpu: amdgpu temp: 46 C
> > >   Fan Speeds (RPM): cpu: 0 gpu: amdgpu fan: 0
> > > Repos:
> > >   Active apt repos in: /etc/apt/sources.list
> > >   1: deb http://ftp.de.debian.org/debian/ buster main contrib non-free
> > >   2: deb-src http://ftp.de.debian.org/debian/ buster main contrib
> > >   3: deb http://security.debian.org/debian-security buster/updates main
> > > contrib non-free
> > >   4: deb-src http://security.debian.org/debian-security buster/updates
> > > main contrib
> > >   5: deb http://ftp.de.debian.org/debian/ buster-updates main contrib
> > > non-free
> > >   6: deb-src http://ftp.de.debian.org/debian/ buster-updates main contrib
> > > Processes:
> > >   CPU top: 5
> > >   1: cpu: 7.0% command: firefox-esr pid: 7855 mem: 704.6 MiB (8.8%)
> > >   2: cpu: 4.3% command: cinnamon pid: 2270 mem: 242.4 MiB (3.0%)
> > >   3: cpu: 2.8% command: xorg pid: 907 mem: 163.3 MiB (2.0%)
> > >   4: cpu: 1.4% command: thunderbird pid: 7710 mem: 383.5 MiB (4.8%)
> > >   5: cpu: 1.0% command: dino-im pid: 7767 mem: 90.5 MiB (1.1%)
> > >   Memory top: 5
> > >   1: mem: 704.6 MiB (8.8%) command: firefox-esr pid: 7855 cpu: 7.0%
> > >   2: mem: 383.5 MiB (4.8%) command: thunderbird pid: 7710 cpu: 1.4%
> > >   3: mem: 242.4 MiB (3.0%) command: cinnamon pid: 2270 cpu: 4.3%
> > >   4: mem: 163.3 MiB (2.0%) command: xorg pid: 907 cpu: 2.8%
> > >   5: mem: 109.5 MiB (1.3%) command: owncloud pid: 2478 cpu: 0.0%
> > > Info:
> > >   Processes: 223 Uptime: 1h 16m Memory: 7.74 GiB used: 2.15 GiB (27.8%)
> > >   Init: systemd v: 239 runlevel: 5 Compilers: gcc: 8.2.0 alt: 7/8
> > >   Shell: bash v: 4.4.23 running in: gnome-terminal inxi: 3.0.20
> > > lg@thanatos:~$