[PATCH] Get mptable OEM/product ID from kconfig variables

[Uwe Hermann]

See patch.

Uwe.

[Stefan Reinauer]

* Uwe Hermann  [101215 22:49]:
> Get mptable OEM/product ID from kconfig variables.
>
> We currently use "COREBOOT" unconditionally as the "OEM ID" in our
> mptable.c files, and hardcode the mainboard name in mptable.c like this:
>
> mptable_init(mc, "DK8-HTX     ", LAPIC_ADDR);
>
> However, the spec says
>
> "OEM ID: A string that identifies the manufacturer of the system hardware."
>   (Table 4-2, page 42)
>
> so "COREBOOT" doesn't match the spec, we should use the hardware vendor name.
>
> Thus, use CONFIG_MAINBOARD_VENDOR which we have already as the "OEM ID"
> (truncate/fill it to 8 characters as per spec).
>
> Also, use CONFIG_MAINBOARD_PART_NUMBER (the board name) as "product ID",
> and truncate/fill it to 12 characters as per spec, if needed.
>
> Abuild-tested.
>
> Signed-off-by: Uwe Hermann

Acked-by: Stefan Reinauer

Please remember to add to Flag Days

[Uwe Hermann]

On Thu, Dec 16, 2010 at 03:41:51AM +0100, Stefan Reinauer wrote:
> Acked-by: Stefan Reinauer

Thanks, r6183.

Uwe.