[v2][patch] use updated microcode patches from AMD

[Marc Jones]

I no longer have a Fam10 test setup but it should just work. If
someone can test it I would appreciate it.

Update equivalent processor revision ID to load latest microcode patches.
Signed-off-by: Marc Jones

Thanks,
Marc

[Marc Jones]

On Wed, Apr 1, 2009 at 4:20 PM, Marc Jones  wrote:
> I no longer have a Fam10 test setup but it should just work. If
> someone can test it I would appreciate it.
>
> Update equivalent processor revision ID to load latest microcode patches.
> Signed-off-by: Marc Jones

Anyone using fam10?

[Marc Jones]

I no longer have a setup for Fam10 so someone will need to test this
patch. This doesn't include new errata for C2 (which really needs to
be addressed).

Update equivalent processor revision ID to load latest microcode
patches and register setting for all FAM10 processors.
This does not include new errata for FAM10 C2.

Signed-off-by: Marc Jones

[Lim, Vincent]

I will test this configuration via SimNow, further improve if issues
arise.

Acked-by: Vincent Lim ([e-mail])

Best Regards,

Vincent Lim
SimNow Team
Performance CoE
Central Engineering
T 512.602.1618
F 512.602.7745

-----Original Message-----
From: Marc Jones [mailto:[e-mail]] 
Sent: Monday, May 04, 2009 11:04 PM
To: Coreboot
Cc: Lim, Vincent
Subject: Re: [v2][patch] use updated microcode patches from AMD

I no longer have a setup for Fam10 so someone will need to test this
patch. This doesn't include new errata for C2 (which really needs to be
addressed).

Update equivalent processor revision ID to load latest microcode patches
and register setting for all FAM10 processors.
This does not include new errata for FAM10 C2.

Signed-off-by: Marc Jones

[Marc Jones]

On Mon, May 4, 2009 at 10:12 PM, Lim, Vincent  wrote:
> I will test this configuration via SimNow, further improve if issues
> arise.
>
> Acked-by: Vincent Lim ([e-mail])

Sorry for the delay. Just wanted to make sure that this doesn't break anyone.
Thanks Vincent!

r4288

Marc