On 01/24/2015 04:51 PM, Timothy Pearson wrote:
Does anyone have experience with using the CK804 PCIe PME# signal? I
have a board here that is receiving PME from the power button but I
cannot seem to get it to receive PME from the PCIe PME# signal.
Dumping the CK804 configuration space and the SYS/ANACTL LPC
configuration spaces with the "Wake on PCIe" option enabled then
disabled in the proprietary BIOS didn't reveal anything interesting.
After further analysis I found it hiding at LPC PCI register 0xe6 bit 3.
Enhancement in Gerrit for review.
+1 (415) 727-8645