problem with udelay solved - romimage too big

[Alessio Sangalli]

Hi, mucking with the source cde and with configuration samples I've 
solved the compile problem I wrote about yesterday night (udelay)

Now I can get a romimage file. I plan to burn this file inside the 
normal flash of my pcchips 810 board to boot from IDE (hard disk).

However, the file romimage is too big! I would have expected a 256KB 
file, but I obtain a 1.4MB one:

$ ll -h payload.block linuxbios.rom romimage
-rw-rw-r--    1 alesan   alesan        64k Mar 14 13:31 linuxbios.rom
-rw-rw-r--    1 alesan   alesan       1.3M Mar 14 13:31 payload.block
-rw-rw-r--    1 alesan   alesan       1.4M Mar 14 13:31 romimage

What am I doing wrong? This is the config file:

target rom
mainboard pcchips/m810lmr
cpu k7
option CONFIG_UDELAY_TSC=1
option VIDEO_CONSOLE=1
option SERIAL_CONSOLE=1
option DEFAULT_CONSOLE_LOGLEVEL=6
option SERIAL_POST=1
option ENABLE_MII=1
option MUST_ENABLE_FLOPPY=1
option HAVE_FRAMEBUFFER=1
option SMA_SIZE=0x80
option BOOT_IDE=1
option IDE_BOOT_DRIVE=0
option ONE_TRACK=32
biosbase 0xffff0000
linux /usr/src/linux
commandline root=/dev/hda1 console=ttyS0,115200 console=tty0


bye bye thank you
as



-- 

How to build a lirc receiver
http://www.manoweb.com/alesan/lirc

[Ronald G. Minnich]

On Fri, 14 Mar 2003, Alessio Sangalli wrote:
> linux /usr/src/linux
> commandline root=/dev/hda1 console=ttyS0,115200 console=tty0

how could you expect a 256KB romimage with a kernel in there? It's just 
not possible. I wish it were. 

ron

[Alessio Sangalli]

Ronald G. Minnich wrote:
> On Fri, 14 Mar 2003, Alessio Sangalli wrote:
> > linux /usr/src/linux
> > commandline root=/dev/hda1 console=ttyS0,115200 console=tty0
>
> how could you expect a 256KB romimage with a kernel in there? It's just
> not possible. I wish it were.

:) yes I know. However I couldn't find any config file or example to let 
the kernel image being loaded from the hard disk or IDE in general. On 
cwlinux it's possible to find images that load a kernel named "kernel" 
on the root file system. How can I reproduce this in my config file?

I will try to "grep -r" it out of the sources, but if anybody could 
help... I promise I will write a beautiful howto :)

bye bye!!!
as




-- 

How to build a lirc receiver
http://www.manoweb.com/alesan/lirc

[steven james]

Greetings,

These days, LinuxBIOS expects to find a bootloader in ELF format at the
beginning of the ROM. Etherboot has an extension to load an image from a
raw IDE partition. I'm working on one that can handle an ext2
filesystem,
but it's VERY alpha at the moment.


On Fri, 14 Mar 2003, Alessio Sangalli wrote:
> Ronald G. Minnich wrote:
> > On Fri, 14 Mar 2003, Alessio Sangalli wrote:
> > > linux /usr/src/linux
> > > commandline root=/dev/hda1 console=ttyS0,115200 console=tty0
> >
> > how could you expect a 256KB romimage with a kernel in there? It's just
> > not possible. I wish it were.
>
> :) yes I know. However I couldn't find any config file or example to let 
> the kernel image being loaded from the hard disk or IDE in general. On 
> cwlinux it's possible to find images that load a kernel named "kernel" 
> on the root file system. How can I reproduce this in my config file?
>
> I will try to "grep -r" it out of the sources, but if anybody could 
> help... I promise I will write a beautiful howto :)
>
> bye bye!!!
> as

[Andrew Ip]

> These days, LinuxBIOS expects to find a bootloader in ELF format at the
> beginning of the ROM. Etherboot has an extension to load an image from a
> raw IDE partition. I'm working on one that can handle an ext2
> filesystem,
> but it's VERY alpha at the moment.
> Actually Adam has that patch already.  His patch supports ext2, ext3 and vfat
> at the moment.  Shouldn't be too hard to support other filesystems also 
> since most of the code can be extracted from grub.

-Andrew

-- 
Andrew Ip
Email:  [e-mail]
Tel:    [phone]
Fax:    [phone]
Mobile: [phone]

Cwlinux Limited
Unit 202B 2/F Lai Cheong Factory Building,
479-479A Castle Peak Road,
Lai Chi Kok, Kowloon,
Hong Kong.

Tel: [phone]
Fax: [phone]

For public pgp key, please obtain it from http://www.keyserver.net/en.

[Adam Agnew]

Right. But check out the latest development release of etherboot, that is
etherboot-5.1.7 . It has pretty much the same code rolled into it and they
have really done some other good work on that release as well (like
cleaning up the directory structure). I suspect Eric brought those polled
ide changes in.

If anyone has trouble with that, they can still use the patch against
5.0.6 which is at
http://www.missl.cs.umd.edu/~agnew/etherboot-5.0.6.polled1.diff

On Sat, 15 Mar 2003, Andrew Ip wrote:
> > These days, LinuxBIOS expects to find a bootloader in ELF format at the
> > beginning of the ROM. Etherboot has an extension to load an image from a
> > raw IDE partition. I'm working on one that can handle an ext2
> > filesystem,
> > but it's VERY alpha at the moment.
> > Actually Adam has that patch already.  His patch supports ext2, ext3 and vfat
> > at the moment.  Shouldn't be too hard to support other filesystems also
> > since most of the code can be extracted from grub.
>
> -Andrew
>
> Cwlinux Limited
> Unit 202B 2/F Lai Cheong Factory Building,
> 479-479A Castle Peak Road,
> Lai Chi Kok, Kowloon,
> Hong Kong.
>
> Tel: [phone]
> Fax: [phone]
>
> For public pgp key, please obtain it from http://www.keyserver.net/en.
> _______________________________________________
> Linuxbios mailing list
> [e-mail]
> http://www.clustermatic.org/mailman/listinfo/linuxbios

[Adam Agnew]

> Steven James wrote:
> > These days, LinuxBIOS expects to find a bootloader in ELF format at the
> > beginning of the ROM. Etherboot has an extension to load an image from a
> > raw IDE partition. I'm working on one that can handle an ext2
> > filesystem,
> > but it's VERY alpha at the moment.

Oh, wait, i see what you mean. On closer inspection of etherboot-5.1.7
they didn't include the file system code? I wonder why.. but alright.

Adam Agnew <[e-mail]> writes:
> > Steven James wrote:
> > > These days, LinuxBIOS expects to find a bootloader in ELF format at the
> > > beginning of the ROM. Etherboot has an extension to load an image from a
> > > raw IDE partition. I'm working on one that can handle an ext2
> > > filesystem,
> > > but it's VERY alpha at the moment.
>
> Oh, wait, i see what you mean. On closer inspection of etherboot-5.1.7
> they didn't include the file system code? I wonder why.. but alright.

Because I rolled the code in.  And I have always seen the fs code as
overkill for the problem.  

However the code should be layered well enough that you should be able
to incorporate the fs code if you like.

Eric

[Alessio Sangalli]

steven james wrote:
> Greetings,
>
> These days, LinuxBIOS expects to find a bootloader in ELF format at the
> beginning of the ROM. Etherboot has an extension to load an image from a
> raw IDE partition. I'm working on one that can handle an ext2
> filesystem,
> but it's VERY alpha at the moment.

Ok. I know how to make an ELF image of the kernel (mkElfImage). Should I 
assume cwlinux's rom has etherboot inside? I was able to boot from a 
ext2(3) partition with it; but now I would like to build my own image 
etc etc. Which options should I include in the config file? Is there any 
example for this?

Bye bye, thank you
as



-- 

How to build a lirc receiver
http://www.manoweb.com/alesan/lirc

steven james <[e-mail]> writes:
> Greetings,
>
> These days, LinuxBIOS expects to find a bootloader in ELF format at the
> beginning of the ROM. Etherboot has an extension to load an image from a
> raw IDE partition. I'm working on one that can handle an ext2
> filesystem,
> but it's VERY alpha at the moment.

And I am working on a tool that can do a lilo like thing, and generate
an ELF header for a kernel stored anywhere on the disk.  And put that
header at the start of the disk.

It works but it needs some variables.

Eric