Re: [coreboot] git clone coreboot : Error: RPC failed; result=22, HTTP code = 502

[Aaron Durbin]

On Fri, Apr 19, 2013 at 4:36 AM, Pradish M P, ERS, HCLTech
 wrote:
> Hi Paul
>
> Sorry for the earlier logs, please find attached the latest logs
> And here the output of df -h command
>
> pradish@pradish-VirtualBox:~$ df -h
> Filesystem            Size  Used Avail Use% Mounted on
> /dev/sda1              32G   15G   16G  48% /
> udev                  242M  4.0K  242M   1% /dev
> tmpfs                 100M  760K   99M   1% /run
> none                  5.0M     0  5.0M   0% /run/lock
> none                  249M  168K  249M   1% /run/shm
> share                  60G   34G   27G  57% /media/sf_share
> /dev/sr0               53M   53M     0 100% /media/VBOXADDITIONS_4.2.4_81684

Fwiw, it seems like your virtual box instance might be acting funny.

[pid  3363] connect(4, {sa_family=AF_INET, sin_port=htons(8080),
sin_addr=inet_addr("10.97.32.19")}, 16) = -1 EINPROGRESS (Operation
now in progress)
<-- snip -->
[pid  3363] getpeername(4, {sa_family=AF_INET, sin_port=htons(8080),
sin_addr=inet_addr("10.97.32.19")}, [16]) = 0
[pid  3363] getsockname(4, {sa_family=AF_INET, sin_port=htons(53159),
sin_addr=inet_addr("10.119.71.112")}, [16]) = 0

I'm not sure if I can trust those addresses as those are returned from
the respective syscalls, but they definitely don't match with
review.coreboot.org's ip address:

$ dig +short review.coreboot.org
coreboot.org.
80.81.252.130

Can you get to other network addresses from your virtual box instance?
There might be some intermittent issues w/ virtual box's proxies, etc.
I'd just periodically try to re-clone.

-Aaron
> From: Paul Menzel [mailto:[e-mail]]
> Sent: Friday, April 19, 2013 2:31 PM
> To: Pradish M P, ERS, HCLTech
> Cc: [e-mail]
> Subject: Re: [coreboot] git clone coreboot : Error: RPC failed; result=22, HTTP code = 502
>
> Dear Pradish,
>
> Am Freitag, den 19.04.2013, 08:27 +0000 schrieb Pradish M P, ERS, HCLTech:
> > Dear Ron/Coreboot folks
> >
> > I have run the command under strace -f , and I have attached the log
> > Let me know if any of you have any suggestions.
>
> Why did you press Ctrl + z? Everything seemed to work until you stopped the process. Have you *retried* running the command as suggested by Björn?
>
> Please do the following again.
>     $ df -h # see if you have enough space
>     $ git clone http://review.coreboot.org/p/coreboot
>
>
> Thanks,
>
> Paul
> ::DISCLAIMER::
>
> The contents of this e-mail and any attachment(s) are confidential and intended for the named recipient(s) only.
> E-mail transmission is not guaranteed to be secure or error-free as information could be intercepted, corrupted,
> lost, destroyed, arrive late or incomplete, or may contain viruses in transmission. The e mail and its contents
> (with or without referred errors) shall therefore not attach any liability on the originator or HCL or its affiliates.
> Views or opinions, if any, presented in this email are solely those of the author and may not necessarily reflect the
> views or opinions of HCL or its affiliates. Any form of reproduction, dissemination, copying, disclosure, modification,
> distribution and / or publication of this message without the prior written consent of authorized representative of
> HCL is strictly prohibited. If you have received this email in error please delete it and notify the sender immediately.
> Before opening any email and/or attachments, please check them for viruses and other defects.