Re: [coreboot] The GbE is not activated on my Board.

[Guckian, David]

Hi,

You are using the Intel Rangeley FSP 4.0 release.
I assume that you downloaded this from http://www.intel.com/content/www/us/en/intelligent-systems/intel-firmware-su...
With this download you should have received the supporting documentation, including the FSP Integration Guide.
Also included in the download you should have received the RangeleyFsp.bsf file.
This BSF file can be used with the Intel BCT, also available on http://www.intel.com/content/www/us/en/intelligent-systems/intel-firmware-su... , to configure settings in the Intel FSP binary.
Review the FSP Integration Guide for more info regarding the FSP binary configuration settings.

Maybe you have configured the Rangeley FSP binary to disable the GbE devices.
Use the BCT to enable the GbE devices, look for the “Enable LAN” option.

Also, coreboot has the ability to overwrite these settings via the UPD_DATA_REGION structure.
Please search your coreboot for PcdEnableLan, if found make sure this is set to “1”.

Regards,
David

From: coreboot [mailto:[e-mail]] On Behalf Of WANG FEI
Sent: Thursday, June 23, 2016 10:16 PM
To: 김유석 
Cc: coreboot 
Subject: Re: [coreboot] The GbE is not activated on my Board.

Can you send me the descriptor.bin and your coreboot image? I can review it.

BTW, your image is running on Mohon Peak platform, right? I just have one Mohon Peak platform to test.

On Wed, Jun 22, 2016 at 7:37 AM, 김유석 <[e-mail]> wrote:
Dear Sir.

I have already defined the "CONFIG_IFD_BIN_PATH"

131 CONFIG_HAVE_IFD_BIN=y
  308 #
  309 # Southbridge
  310 #
  311 # CONFIG_AMD_SB_CIMX is not set
  312 # CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800 is not set
  313 # CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900 is not set
  314 CONFIG_SOUTH_BRIDGE_OPTIONS=y
  315 # CONFIG_SOUTHBRIDGE_INTEL_COMMON is not set
  316 # CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO is not set
  317 CONFIG_SOUTHBRIDGE_INTEL_FSP_RANGELEY=y
  318 CONFIG_IFD_BIN_PATH="../bins/descriptor.bin"

And successfully add to coreboot.bin

poplinux@raw coreboot $ > ./ifdtool -d coreboot.bin
File src/oem_dumped.bin is 8388608 bytes
FLMAP0:    0x01040003
  NR:      1
  FRBA:    0x40
  NC:      1
  FCBA:    0x30
FLMAP1:    0x09100206
  ISL:     0x09
  FPSBA:   0x100
  NM:      2
  FMBA:    0x60
FLMAP2:    0x00210020
  PSL:     0x2100
  FMSBA:   0x200
FLUMAP1:   0x000002e0
  Intel ME VSCC Table Length (VTL):        2
  Intel ME VSCC Table Base Address (VTBA): 0x000e00

ME VSCC table:
  JID0:  0x001740ef
    SPI Componend Device ID 1:          0x17
    SPI Componend Device ID 0:          0x40
    SPI Componend Vendor ID:            0xef
  VSCC0: 0x20052005
    Lower Erase Opcode:                 0x20
    Lower Write Enable on Write Status: 0x50
    Lower Write Status Required:        No
    Lower Write Granularity:            64 bytes
    Lower Block / Sector Erase Size:    4KB
    Upper Erase Opcode:                 0x20
    Upper Write Enable on Write Status: 0x50
    Upper Write Status Required:        No
    Upper Write Granularity:            64 bytes
    Upper Block / Sector Erase Size:    4KB

OEM Section:
00: 31 31 35 32 31 35 30 39 32 30 00 00 00 00 00 00
10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Found Region Section
FLREG0:    0x000f0000
  Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff
FLREG1:    0x07ff0010
  Flash Region 1 (BIOS): 00010000 - 007fffff
FLREG2:    0x00000fff
  Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused)
FLREG3:    0x00000fff
  Flash Region 3 (GbE): 00fff000 - 00000fff (unused)
FLREG4:    0x00000fff
  Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused)

Found Component Section
FLCOMP     0x09200024
  Dual Output Fast Read Support:       not supported
  Read ID/Read Status Clock Frequency: 33MHz
  Write/Erase Clock Frequency:         33MHz
  Fast Read Clock Frequency:           33MHz
  Fast Read Support:                   not supported
  Read Clock Frequency:                20MHz
  Component 2 Density:                 8MB
  Component 1 Density:                 8MB
FLILL      0x00000000
  Invalid Instruction 3: 0x00
  Invalid Instruction 2: 0x00
  Invalid Instruction 1: 0x00
  Invalid Instruction 0: 0x00
FLPB       0x00000000
  Flash Partition Boundary Address: 0x000000

Found PCH Strap Section
PCHSTRP0:  0x00080002
PCHSTRP1:  0x00000000
PCHSTRP2:  0x00000000
PCHSTRP3:  0x00000003
PCHSTRP4:  0x0000007f
PCHSTRP5:  0x007fffc0
PCHSTRP6:  0x0001c7c0
PCHSTRP7:  0x00000624
PCHSTRP8:  0x00000000
PCHSTRP9:  0xffffffff
PCHSTRP10: 0xffffffff
PCHSTRP11: 0xffffffff
PCHSTRP12: 0xffffffff
PCHSTRP13: 0xffffffff
PCHSTRP14: 0xffffffff
PCHSTRP15: 0xffffffff
PCHSTRP16: 0xffffffff
PCHSTRP17: 0xffffffff

Found Master Section
FLMSTR1:   0x1f1f0000 (Host CPU/BIOS)
  Platform Data Region Write Access: enabled
  GbE Region Write Access:           enabled
  Intel ME Region Write Access:      enabled
  Host CPU/BIOS Region Write Access: enabled
  Flash Descriptor Write Access:     enabled
  Platform Data Region Read Access:  enabled
  GbE Region Read Access:            enabled
  Intel ME Region Read Access:       enabled
  Host CPU/BIOS Region Read Access:  enabled
  Flash Descriptor Read Access:      enabled
  Requester ID:                      0x0000

FLMSTR2:   0x08090118 (Intel ME)
  Platform Data Region Write Access: disabled
  GbE Region Write Access:           enabled
  Intel ME Region Write Access:      disabled
  Host CPU/BIOS Region Write Access: disabled
  Flash Descriptor Write Access:     disabled
  Platform Data Region Read Access:  disabled
  GbE Region Read Access:            enabled
  Intel ME Region Read Access:       disabled
  Host CPU/BIOS Region Read Access:  disabled
  Flash Descriptor Read Access:      enabled
  Requester ID:                      0x0118

FLMSTR3:   0xffffffff (GbE)
  Platform Data Region Write Access: enabled
  GbE Region Write Access:           enabled
  Intel ME Region Write Access:      enabled
  Host CPU/BIOS Region Write Access: enabled
  Flash Descriptor Write Access:     enabled
  Platform Data Region Read Access:  enabled
  GbE Region Read Access:            enabled
  Intel ME Region Read Access:       enabled
  Host CPU/BIOS Region Read Access:  enabled
  Flash Descriptor Read Access:      enabled
  Requester ID:                      0xffff

Found Processor Strap Section
????:      0xffffffff
????:      0xffffffff
????:      0xffffffff
????:      0xffffffff

But, GbE still not running.

Please advise to me.

Thank you.

2016-06-22 오전 12:54에 WANG FEI 이(가) 쓴 글:
INCLUDE_ME & ME_PATH was used before, but it has changed to IFD_BIN_PATH recently. Did you define IFD_BIN_PATH with path/descriptor.bin? It should work!

On Tue, Jun 21, 2016 at 2:16 AM, 김유석 <[e-mail]> wrote:
Dear Sir.

Thank's your prompt reply.

My coreboot source code download from coreboot GIT and ADI's coreboot GIT. both.

This time, I work on official coreboot GIT(not ADI's GIT, but i can do ADI's GIT)

- attach the descriptor.bin

I was select the "CONFIG_HAVE_IFD_BIN", "CONFIG_SOUTHBRIDGE_INTEL_FSP_RANGELEY", and fill-up the "CONFIG_IFD_BIN_PATH".
  And descriptor.bin is extract from ADI's EVB.

131 CONFIG_HAVE_IFD_BIN=y
  308 #
  309 # Southbridge
  310 #
  311 # CONFIG_AMD_SB_CIMX is not set
  312 # CONFIG_SOUTHBRIDGE_AMD_CIMX_SB800 is not set
  313 # CONFIG_SOUTHBRIDGE_AMD_CIMX_SB900 is not set
  314 CONFIG_SOUTH_BRIDGE_OPTIONS=y
  315 # CONFIG_SOUTHBRIDGE_INTEL_COMMON is not set
  316 # CONFIG_SOUTHBRIDGE_INTEL_COMMON_GPIO is not set
  317 CONFIG_SOUTHBRIDGE_INTEL_FSP_RANGELEY=y
  318 CONFIG_IFD_BIN_PATH="../bins/descriptor.bin"

[cid:image001.jpg@01D1CEED.67E8B510]

- Not exist  "INCLUDE_ME" and "ME_PATH"

I'm can't setup the "INCLUDE_ME" and "ME_PATH" Because thie keyword is not exist coreboot's source tree.

I was try to find the "INCLUDE_ME" and "ME_PATH" from coreboot source, But not exist this keyword.

poplinux@raw coreboot $ > ls
  3rdparty  Documentation  Makefile      README  cscope.out  src   toolchain.inc
  COPYING   MAINTAINERS    Makefile.inc  build   payloads    tags  util

poplinux@raw coreboot $ > grep "INCLUDE_ME" * -Rn

poplinux@raw coreboot $ > grep "ME_PATH" * -Rn
  cscope.out:9055111:CONFIG_RESUME_PATH_SAME_AS_BOOT
  cscope.out:16228575:CONFIG_RESUME_PATH_SAME_AS_BOOT
  cscope.out:16229157:CONFIG_RESUME_PATH_SAME_AS_BOOT
  src/cscope.out:354905:CONFIG_RESUME_PATH_SAME_AS_BOOT
  src/cscope.out:7528183:CONFIG_RESUME_PATH_SAME_AS_BOOT
  src/cscope.out:7528765:CONFIG_RESUME_PATH_SAME_AS_BOOT
  src/vendorcode/google/chromeos/vboot2/vboot_logic.c:125:    if (!IS_ENABLED(CONFIG_RESUME_PATH_SAME_AS_BOOT))
  src/vendorcode/google/chromeos/vboot2/vboot_logic.c:311:    if (IS_ENABLED(CONFIG_RESUME_PATH_SAME_AS_BOOT) &&
  src/drivers/intel/fsp1_1/romstage.c:181:        !IS_ENABLED(CONFIG_RESUME_PATH_SAME_AS_BOOT) &&
  src/Kconfig:540:config RESUME_PATH_SAME_AS_BOOT

Please advise to me.

Thank you.

2016-06-21 오전 6:58에 WANG FEI 이(가) 쓴 글:
Here is a sample,

Please select INCLUDE_ME to y and set ME_PATH to point to your descriptor.bin (Path/descriptor.bin, refer to FSP_FILE as a sample).

On Mon, Jun 20, 2016 at 10:48 PM, WANG FEI <[e-mail]> wrote:
YuSeok, how did you attach the descriptor.bin to your coreboot? Did you follow the previous mail to include descriptor.bin with INCLUDE_ME and ME_PATH in .config?

On Mon, Jun 20, 2016 at 6:46 AM, 김유석 <[e-mail]> wrote:
Dear Sir.

My ENV

EVB : ADI SG-2440

source : official coreboot

FSP : intel FSP 4.0

I was successfully build-up the coreboot and successfully boot-up my EVB.

But My EVB's GbE is not activated(not running.)

So, I was try to boot using the original OEM bios(from ADI). This image is actvate the GbE.

Another developer was same quetion to Coreboot communite. And He is resolved this issue.

https://www.coreboot.org/pipermail/coreboot/2015-January/079074.html

This guy's said that "Must add the descriptor.bin to coreboot.bin".

So, I was extract the descriptor.bin from ADI's coreboot.bin

And successfully attached the descriptor.bin to my coreboot.bin.

oem_dumped.bin => ADI's default coreboot.bin, This image are activated the GbE.

poplinux@raw bins $ > ./ifdtool -x src/oem_dumped.bin
  File src/oem_dumped.bin is 8388608 bytes
    Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff
    Flash Region 1 (BIOS): 00010000 - 007fffff
    Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused)
    Flash Region 3 (GbE): 00fff000 - 00000fff (unused)
    Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused)

poplinux@raw bins $ > ln -s ./flashregion_0_flashdescriptor.bin descriptor.bin
  poplinux@raw bins $ > ./ifdtool -d ./descriptor.bin
  File ./descriptor.bin is 65536 bytes
  FLMAP0:    0x01040003
    NR:      1
    FRBA:    0x40
    NC:      1
    FCBA:    0x30
  FLMAP1:    0x09100206
    ISL:     0x09
    FPSBA:   0x100
    NM:      2
    FMBA:    0x60
  FLMAP2:    0x00210020
    PSL:     0x2100
    FMSBA:   0x200
  FLUMAP1:   0x000002e0
    Intel ME VSCC Table Length (VTL):        2
    Intel ME VSCC Table Base Address (VTBA): 0x000e00

ME VSCC table:
    JID0:  0x001740ef
      SPI Componend Device ID 1:          0x17
      SPI Componend Device ID 0:          0x40
      SPI Componend Vendor ID:            0xef
    VSCC0: 0x20052005
      Lower Erase Opcode:                 0x20
      Lower Write Enable on Write Status: 0x50
      Lower Write Status Required:        No
      Lower Write Granularity:            64 bytes
      Lower Block / Sector Erase Size:    4KB
      Upper Erase Opcode:                 0x20
      Upper Write Enable on Write Status: 0x50
      Upper Write Status Required:        No
      Upper Write Granularity:            64 bytes
      Upper Block / Sector Erase Size:    4KB

OEM Section:
  00: 31 31 35 32 31 35 30 39 32 30 00 00 00 00 00 00
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

Found Region Section
  FLREG0:    0x000f0000
    Flash Region 0 (Flash Descriptor): 00000000 - 0000ffff
  FLREG1:    0x07ff0010
    Flash Region 1 (BIOS): 00010000 - 007fffff
  FLREG2:    0x00000fff
    Flash Region 2 (Intel ME): 00fff000 - 00000fff (unused)
  FLREG3:    0x00000fff
    Flash Region 3 (GbE): 00fff000 - 00000fff (unused)
  FLREG4:    0x00000fff
    Flash Region 4 (Platform Data): 00fff000 - 00000fff (unused)

Found Component Section
  FLCOMP     0x09200024
    Dual Output Fast Read Support:       not supported
    Read ID/Read Status Clock Frequency: 33MHz
    Write/Erase Clock Frequency:         33MHz
    Fast Read Clock Frequency:           33MHz
    Fast Read Support:                   not supported
    Read Clock Frequency:                20MHz
    Component 2 Density:                 8MB
    Component 1 Density:                 8MB
  FLILL      0x00000000
    Invalid Instruction 3: 0x00
    Invalid Instruction 2: 0x00
    Invalid Instruction 1: 0x00
    Invalid Instruction 0: 0x00
  FLPB       0x00000000
    Flash Partition Boundary Address: 0x000000

Found PCH Strap Section
  PCHSTRP0:  0x00080002
  PCHSTRP1:  0x00000000
  PCHSTRP2:  0x00000000
  PCHSTRP3:  0x00000003
  PCHSTRP4:  0x0000007f
  PCHSTRP5:  0x007fffc0
  PCHSTRP6:  0x0001c7c0
  PCHSTRP7:  0x00000624
  PCHSTRP8:  0x00000000
  PCHSTRP9:  0xffffffff
  PCHSTRP10: 0xffffffff
  PCHSTRP11: 0xffffffff
  PCHSTRP12: 0xffffffff
  PCHSTRP13: 0xffffffff
  PCHSTRP14: 0xffffffff
  PCHSTRP15: 0xffffffff
  PCHSTRP16: 0xffffffff
  PCHSTRP17: 0xffffffff

Found Master Section
  FLMSTR1:   0x1f1f0000 (Host CPU/BIOS)
    Platform Data Region Write Access: enabled
    GbE Region Write Access:           enabled
    Intel ME Region Write Access:      enabled
    Host CPU/BIOS Region Write Access: enabled
    Flash Descriptor Write Access:     enabled
    Platform Data Region Read Access:  enabled
    GbE Region Read Access:            enabled
    Intel ME Region Read Access:       enabled
    Host CPU/BIOS Region Read Access:  enabled
    Flash Descriptor Read Access:      enabled
    Requester ID:                      0x0000

FLMSTR2:   0x08090118 (Intel ME)
    Platform Data Region Write Access: disabled
    GbE Region Write Access:           enabled
    Intel ME Region Write Access:      disabled
    Host CPU/BIOS Region Write Access: disabled
    Flash Descriptor Write Access:     disabled
    Platform Data Region Read Access:  disabled
    GbE Region Read Access:            enabled
    Intel ME Region Read Access:       disabled
    Host CPU/BIOS Region Read Access:  disabled
    Flash Descriptor Read Access:      enabled
    Requester ID:                      0x0118

FLMSTR3:   0xffffffff (GbE)
    Platform Data Region Write Access: enabled
    GbE Region Write Access:           enabled
    Intel ME Region Write Access:      enabled
    Host CPU/BIOS Region Write Access: enabled
    Flash Descriptor Write Access:     enabled
    Platform Data Region Read Access:  enabled
    GbE Region Read Access:            enabled
    Intel ME Region Read Access:       enabled
    Host CPU/BIOS Region Read Access:  enabled
    Flash Descriptor Read Access:      enabled
    Requester ID:                      0xffff

Found Processor Strap Section
  ????:      0xffffffff
  ????:      0xffffffff
  ????:      0xffffffff
  ????:      0xffffffff

But GbE is still de-activated. boot log is see below.

PCI: pci_scan_bus for bus 00
  PCI: 00:00.0 [8086/0000] ops
  PCI: 00:00.0 [8086/1f0e] enabled
  Capability: type 0x10 @ 0x40
  Capability: type 0x01 @ 0x80
  Capability: type 0x0d @ 0x88
  Capability: type 0x05 @ 0x90
  Capability: type 0x10 @ 0x40
  PCI: 00:01.0 subordinate bus PCI Express
  PCI: 00:01.0 [8086/1f10] enabled
  PCI: Static device PCI: 00:02.0 not found, disabling it.
  Capability: type 0x10 @ 0x40
  Capability: type 0x01 @ 0x80
  Capability: type 0x0d @ 0x88
  Capability: type 0x05 @ 0x90
  Capability: type 0x10 @ 0x40
  PCI: 00:03.0 subordinate bus PCI Express
  PCI: 00:03.0 [8086/1f12] enabled
  PCI: Static device PCI: 00:04.0 not found, disabling it.
  PCI: 00:0b.0 [8086/1f18] enabled
  PCI: 00:0e.0 [8086/1f14] enabled
  PCI: 00:0f.0 [8086/1f16] enabled
  PCI: 00:13.0 [8086/1f15] enabled
  PCI: Static device PCI: 00:14.0 not found, disabling it.
  PCI: Static device PCI: 00:14.1 not found, disabling it.
  PCI: Static device PCI: 00:14.2 not found, disabling it.
  PCI: Static device PCI: 00:14.3 not found, disabling it.

I don't have a any idea for activate the GbE.

Please advise to me.

Thank you.

--------------------------------------------------------------
Intel Research and Development Ireland Limited
Registered in Ireland
Registered Office: Collinstown Industrial Park, Leixlip, County Kildare
Registered Number: 308263

This e-mail and any attachments may contain confidential material for the sole
use of the intended recipient(s). Any review or distribution by others is
strictly prohibited. If you are not the intended recipient, please contact the
sender and delete all copies.