attached is a patch to enable mmconf access on RS690.
This patch is required for the upcoming Siemens sitemp mainboard.
1. Overwrite read resources in src/southbridge/amd/rs690/ht.c
a. disable and hide BAR3 so pci_get_resource() doesn't touch.
b. add an mmconf resource
2. Overwrite set_resources so that it:
a. writes the mmconf resource base to the BAR3
b. disable writes and hide BAR3
c. find a not assigned resource in the K8 mmio and
setup base and limit with flag nonposted
3. Add the resource as reserved in add_mainboard_resources()
4. in the mainboard's acpi_tables.c
a. pass the mmconf base to the dsdt.
b. create a ACPI mcfg table
I've testet with Linux 2.6.12, Linux 2.6.26 and Windows XP SP3 + ATI X1200 driver,
Linux 2.6.26 comes up with the following messages:
[ 0.232014] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 31
[ 0.232014] PCI: MCFG area at e0000000 reserved in E820
[ 0.232014] PCI: Using MMCONFIG at e0000000 - e1ffffff
[ 0.232014] PCI: Using configuration type 1 for base access
lspci -xxxx shows me 4Kb ext config space for some devices.
Can somebody please comment on the patch ? Would be nice !
Signed-off-by: Josef Kellermann<seppk(a)arcor.de> <mailto://firstname.lastname@example.org>
Show replies by date