After I change
MAXIMUM_CONSOLE_LOGLEVEL from 9 to 8 it works.
发件人: Stefan Reinauer [mailto:firstname.lastname@example.org]
发送时间: 2003年11月25日 1:54
抄送: Eric W. Biederman; linuxbios(a)clustermatic.org
主题: Re: Tyan S4880
* YhLu <YhLu(a)tyan.com> [031125 03:37]:
I'm porting Tyan S4880 now. I found that the following building err, do
meet it in AMD board?
No, the AMD boards build fine for me.
Even I only enable the CPU0's memctrl in the
It seems the struct itself in auto.c is pretty uncritical for size.
Other parts like the log level need a lot more tuning if you want the
image to be as verbose as possible.
* Do you compile with romcc -O (not -O0 and not -O2)
* What's your max log level? The UP-build (Solo) allows me to
put MAXIMUM_CONSOLE_LOGLEVEL up to 10, other builds want less.
objcopy -O binary linuxbios linuxbios.strip
gcc -o buildrom /home/yhlu/xx/xx/freebios2/util/buildrom/buildrom.c
./buildrom linuxbios.strip linuxbios.rom ../../tg3.zelf 0x10000 0x18000
linuxbios image is 65854 bytes; only 65536 allowed
Linuxbios input file larger than allowed size!
Is this 64k including payload size? I use:
guess the size issue should be mentioned in the docs. Everybody
fiddling with LinuxBIOS on AMD64 _has_ seen it..
Stefan Reinauer, SUSE LINUX AG
Teamleader Architecture Development