Re: [coreboot] Getting serial output from w83627hf?

[Stefan Reinauer]

* Alp Eren Köse  [111018 17:02]:
> By the way I do not have a "CMC state machine binary", which it says:
> #We don't ship that, but booting without it is bound to fail
> in the src/southbridge/intel/sch/Makefile.inc file. What is it, how can get it?
>
> Is it likely for that to cause this serial output problem??
>
> Thanks in advance.

Yes, without the binary you will not get the system to boot.

Getting serial output from w83627hf?

[Alp Eren Köse]

2011/10/19 Stefan Reinauer
> > By the way all I get is \0x00 when I open the board and another \0x00
>
> when I
> > close it..
>
> Do you have your CMC binary at the location it's strapped to by
> hardware?

Hi, thanks a lot..
So yes I removed the uart_init() call from main(), nothing changed however.

Ok now so i need the CMC binary, but I have no idea what is a CMC binary,
how can i get it? I googled it, but didn't help me much..
Will I need to extract it from the proprietary bios somehow??
> Do you get port 80 post codes?

The board doesn't have any PCI slot, so that's not possible unfortunately. I
also enabled the "Show POST codes on the debug console" option, but it
doesn't show up anything either..