EPIA V2 VGA build succeeded, getting inspired from tyan ?

[Mathieu Deschamps]

Hello,

I've been making some port/adapt for epiam vgabios V2  for a few days
now ... and it *seems* my build have succeeded :).
Still have some minor warning though...

I've seen in the tyan source (in the mainboard.c) that the 
DO VGA was *called* here (setup_realmode_idt() and do_vgabios()).
Am I on the good way doing same with via/epia/mainboard.c ?
In other words, is there another c file called first ? If not so
it's obvious it's in it to call the vga init, isn't ?

Thanks for your help, advices, and your good work ...of course. :)
mathieu

[Dmitry Borisov]

----- Original Message ----- 
From: "Mathieu Deschamps" 
Subject: EPIA V2 VGA build succeeded, getting inspired from tyan ?
> Hello,
>
> I've been making some port/adapt for epiam vgabios V2  for a few days
> now ... and it *seems* my build have succeeded :).
> Still have some minor warning though...
>
> I've seen in the tyan source (in the mainboard.c) that the 
> DO VGA was *called* here (setup_realmode_idt() and do_vgabios()).
> Am I on the good way doing same with via/epia/mainboard.c ?
> In other words, is there another c file called first ? If not so
> it's obvious it's in it to call the vga init, isn't ?

Good news. Can we all try it out also from CVS or not yet ?
I would be interested to tweak it the way V1 works now.
Keep it up.
Dmitry/