thanks a lot for your advice. It works great!
This week I'll receive the flash programmer and then I'll start to test
Da: "Marshall Dawson" <marshalldawson3rd(a)gmail.com>
Data: 30/01/2017 16.51
Ogg: Re: [coreboot] !IS_TOP_ALIGNED_ADDRESS failure
When you try building by setting
different mainboards, are you running make distclean between those
attempts? If not, you can easily wind up with a .config where settings
and options aren't appropriate for your board.
For your Sapphire
system, the AMD Bettong board might be close enough to get you started.
If you want to give it a shot, you can try the following. Make sure
you have some method for reflashing your original BIOS, of course,
because this probably won't work initially.
1) Create a .config file using the following
2) Run make olddefconfig
I've assumed the board's two serial connectors are connected to the APU
and not on a SuperIO (CONFIG_HUDSON_UART=y). Unfortunately, the Merlin
Falcon binaryPI has a "feature" that prevents this from working.
Ricardo has an easy workaround to allow the UART to function.
Cherry-pick the patch here:
On Sun, Jan 29, 2017 at 5:50 PM, giuseppe.ferrigni--- via coreboot
Hello to all,
I'm getting confidence with coreboot for the first time. I followed instruction in the
"Lesson1" article for a very basic build and everything gone well. Now I'm
trying to build coreboot for a real board (amd ipc_fp4_dp not present in current release)
but setting several mainbord devices results in different errors. One of these is the
cbfstool: /home/oxboxes/coreboot/util/cbfstool/cbfstool_image.c:666: cbfs_add_entry:
Assertion '' !IS_TOP_ALIGNED_ADDRESS(content_offset)' failed
Due to lack of tutorial to understand the coreboot structure, can someone help me to
understand why the building process fail?
coreboot mailing list: coreboot(a)coreboot.org