Dear all:
My MB has two cpu (AMD opteron) , chipset is broadcom bcm5780 and bcm5785 ,after I flash my linuxbios ,It hang ,and from minicom , we can see the error below(attchment is the whole log ):
PCI: 00:0a.0 [1166/0130] enabled PCI: 00:0b.0 [1166/0130] enabled PCI: 00:0c.0 [1166/0132] enabled PCI: 00:0d.0 [1166/0132] enabled PCI: 00:0e.0 [1166/0132] enabled PCI: 00:0f.0 [1166/0132] enabled PCI: 00: 0a.0 PCI: Left over static devices. Check your Config.lb http://config.lb/
could anyone tell me what is the problem? Thank you very much! Neil
Neil wrote:
Dear all:
My MB has two cpu (AMD opteron) , chipset is broadcom bcm5780 and bcm5785 ,after I flash my linuxbios ,It hang ,and from minicom , we can see the error below(attchment is the whole log ):
PCI: 00:0a.0 [1166/0130] enabled PCI: 00:0b.0 [1166/0130] enabled PCI: 00:0c.0 [1166/0132] enabled PCI: 00:0d.0 [1166/0132] enabled PCI: 00:0e.0 [1166/0132] enabled PCI: 00:0f.0 [1166/0132] enabled PCI: 00: 0a.0 PCI: Left over static devices. Check your Config.lb http://config.lb/
could anyone tell me what is the problem? Thank you very much! Neil
LinuxBIOS-1.1.8_Fallback Thu May 11 14:53:42 CST 2006 starting... real main sysinfo =000cf000 bsp_apicid=00 (0,1) link=01 (1,0) link=01 02 nodes initialized. SBLink=02 NC node|link=02 SMBus controller enabled Ram1.00 Ram1.01 Ram2.00 Registered 200Mhz RAM: 0x00100000 KB Ram2.01 Registered 200Mhz RAM: 0x00200000 KB Ram3 Initializing memory: done Initializing memory: done Setting variable MTRR 02, base: 0000MB, range: 0800MB, type WB DQS Training:RcvrEn:Pass1: 00 CTLRMaxDelay=06 done DQS Training:RcvrEn:Pass1: 01 CTLRMaxDelay=ae done DQS Training:DQSPos: 00 done DQS Training:DQSPos: 01 DQS Training Rd Wr failed ctrl01 done DQS Training:RcvrEn:Pass2: 00 CTLRMaxDelay=38 done DQS Training:RcvrEn:Pass2: 01 CTLRMaxDelay=ae done DQS Training:tsc[00]=00000000251a65f8 DQS Training:tsc[01]=000000002a97a605 DQS Training:tsc[02]=000000003f4c0937 DQS Training:tsc[03]=000000031eb6b53c DQS Training:tsc[04]=0000000320edcf05 Ram4 v_esp=000cefc4 testx = 5a5a5a5a Copying data from cache to ram -- switching to use ram as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to ram. src=fffe0004 dst=00004000 linxbios_ram.bin length = 00022c10 Jumping to LinuxBIOS. LinuxBIOS-1.1.8_Fallback Thu May 11 14:53:42 CST 2006 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: 00:19.3 siblings=1 CPU: APIC: 02 enabled CPU: APIC: 03 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] enabled PCI: 00:00.0 [1166/0130] enabled PCI: 00:0a.0 [1166/0130] enabled next_unitid: 0010 PCI: 00:00.0 subbordinate bus PCI-X PCI: 00:00.0 [1166/0036] enabled PCI: 00:10.0 [1166/0036] enabled next_unitid: 0015 PCI: pci_scan_bus for bus 00 PCI: 00:04.0 [1002/5159] enabled PCI: 00:06.0 [1166/0036] enabled PCI: 00:07.0 [1166/0205] enabled Disabling static device: PCI: 00:07.1 PCI: 00:07.2 [1166/0234] enabled PCI: 00:07.3 [1166/0238] enabled Disabling static device: PCI: 00:07.4 Disabling static device: PCI: 00:07.5 Disabling static device: PCI: 00:07.6 Disabling static device: PCI: 00:08.0 Disabling static device: PCI: 00:08.1 Disabling static device: PCI: 00:08.2 PCI: 00:0a.0 [1166/0130] enabled PCI: 00:0b.0 [1166/0130] enabled PCI: 00:0c.0 [1166/0132] enabled PCI: 00:0d.0 [1166/0132] enabled PCI: 00:0e.0 [1166/0132] enabled PCI: 00:0f.0 [1166/0132] enabled PCI: 00:0a.0 PCI: Left over static devices. Check your Config.lb
This is an annoying message. It is saying that you have spec'ed out more devices than exist. You need to look at your mobo more closely.
thanks
ron
-
Neil -
Ronald G Minnich