It seems that now the microcode loading for AMD fam15h CPUs, including for A10-5750M fam15h Richland CPU found at coreboot-supported Lenovo G505S, is supposed to be done in two steps:
1) First of all it is initializing with this microcode hardcoded as the hex values - version 0600110F [2012-01-11] :
./src/vendorcode/amd/agesa/f15tn/Proc/CPU/Family/0x15/TN/F15TnMicrocodePatch0600110F_Enc.c ( https://review.coreboot.org/cgit/coreboot.git/tree/src/vendorcode/amd/agesa/... )
2) Then it is being updated with a slightly newer microcode binary, stored inside this container originally obtained from linux-firmware.git ( https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/... ) - version 6001119 [2012-07-13] :
./3rdparty/blobs/cpu/amd/family_15h/microcode_amd_fam15h.bin ( https://review.coreboot.org/cgit/blobs.git/tree/cpu/amd/family_15h/microcode... )
<<< although it is FAR from being the latest, the latest available is version 600111F [2018-03-05] from platomav repository - https://github.com/platomav/CPUMicrocodes , cpu00610F01_ver0600111F_2018-03-05_AC55EB96.bin - which greedy AMD did not share with Linux users at linux-firmware.git , but was happy to share with companies such as Lenovo and ASUS for their proprietary UEFI/BIOS updates...)
However , all these microcode update operations are happening ONLY if the equivalence tables are including the relevant CPU ID equivalence lines ! For G505S's A10-5750M fam15h Richland CPU :
"1)" step is not done because this important part of awokd's change has not been accepted (marked with >>>) :
https://review.coreboot.org/#/c/coreboot/+/22843/4/src/vendorcode/amd/agesa/...
STATIC CONST UINT16 ROMDATA CpuF15TnMicrocodeEquivalenceTable[] = {
0x6131, 0x6101,
0x6101, 0x6101, 0x6100, 0x6100 };
// Unencrypted equivalent STATIC CONST UINT16 ROMDATA CpuF15TnUnEncryptedMicrocodeEquivalenceTable[] = {
0x6131, 0x6901,
0x6101, 0x6901, 0x6100, 0x6900 };
"2)" step is not done because for it to work, at https://review.coreboot.org/cgit/coreboot.git/tree/src/cpu/amd/family_10h-fa... file there should be these lines at the equivalence table, lines 48-49 :
/* Family 15h */ { 0x600f12, 0x6012 }, /* OR-B2 */ { 0x600f20, 0x6020 }, /* OR-C0 */
{ 0x610f01, 0x6101 }, /* TN-A1 */ { 0x610f31, 0x6101 }, /* RL-A1 */
( there is no typo, Trinity 0x610f01 and Richland 0x610f31 are sharing the same microcodes )
I am planning to submit a small patch which is addressing those problems, but before I do that I would like to hear your thoughts
Best regards, Mike Banon
-
Mike Banon