[LinuxBIOS] set fiv fail

[AlexHuang]

Hi all,

I got an error message from linuxbios as below:

The CPU on my platform is Sempron. Why do I get “set fid failed for apicid
=00” and how to solve this issue??

On the other hand, I got error message as follow:

Ram2.00

No memory for this cpu

I have no idea how to solve this issue.  Can somebody give me a suggestion
how to find the bug out??

Thanks for your help

Alex

LinuxBIOS-1.1.8_m57sli_Fallback 一  16:26:52 CST 2007 starting...

*sysinfo range: [000cf000,000cf730)

bsp_apicid=00

core0 started:

started ap apicid:  01

SBLink=00

NC node|link=00

begin msr fid, vid 31061212060e0202

set fid failed for apicid =00

end   msr fid, vid 31061206060e0202

mcp55_num:00

ht reset -

SMBus controller enabled

Ram1.00

Ram2.00

No memory for this cpu

Ram3

No memory

[roger]

On Mon, 2007-04-30 at 17:19 +0800, AlexHuang wrote:
> Hi all,
>
> I got an error message from linuxbios as below:
>
> No memory for this cpu

RAM Cache feauture?

Mon Apr 30 11:38:36 PDT 2007

[yhlu]

you need to make sure you enable SMAF in SB.

YH

[Feng, Libo]

Yes, we also met the second problem mentioned. It is caused by the DQS write and read training failure, but we didn't know how to fix it because RAM initialization is very complicated. Then we wanted to get more trace information, so we enabled DQS_TRAIN_DEBUG in /amd/amdk8/raminit_f_dqs.c, it was a big surprise that the RAM initialization was passed. All were done based on AMD Athlon 64x2. Just for your reference. Mr. Lu Yinghai owns the file, maybe he can give more technical explanation.

Best Regards

丰立波 Feng Libo @ AMD  Ext: 20906 
Mobile Phone: [phone] 
Office Phone: [phone]

________________________________

From: linuxbios-bounces+libo.feng=[e-mail] [mailto:linuxbios-bounces+libo.feng=[e-mail]] On Behalf Of AlexHuang
Sent: Monday, April 30, 2007 5:19 PM
To: [e-mail]
Subject: [LinuxBIOS] set fiv fail

Hi all,

I got an error message from linuxbios as below:

The CPU on my platform is Sempron. Why do I get “set fid failed for apicid =00” and how to solve this issue??

On the other hand, I got error message as follow:

Ram2.00

No memory for this cpu

I have no idea how to solve this issue.  Can somebody give me a suggestion how to find the bug out??

Thanks for your help

Alex

LinuxBIOS-1.1.8_m57sli_Fallback 一  16:26:52 CST 2007 starting...

*sysinfo range: [000cf000,000cf730)

bsp_apicid=00

core0 started:

started ap apicid:  01

SBLink=00

NC node|link=00

begin msr fid, vid 31061212060e0202

set fid failed for apicid =00

end   msr fid, vid 31061206060e0202

mcp55_num:00

ht reset -

SMBus controller enabled

Ram1.00

Ram2.00

No memory for this cpu

Ram3

No memory

[yhlu]

Alex's problem: the SPDROM address setting is not right. So can not find RAM.

I wonder what is your gcc version. Please use fcc 4.0.2 or 4.1.1. Some
gcc make bad optimizaiton.

YH

On 5/7/07, Feng, Libo  wrote:
> Yes, we also met the second problem mentioned. It is caused by the DQS write
> and read training failure, but we didn't know how to fix it because RAM
> initialization is very complicated. Then we wanted to get more trace
> information, so we enabled DQS_TRAIN_DEBUG in /amd/amdk8/raminit_f_dqs.c, it
> was a big surprise that the RAM initialization was passed. All were done
> based on AMD Athlon 64x2. Just for your reference. Mr. Lu Yinghai owns the
> file, maybe he can give more technical explanation.
>
> Best Regards
>
> 丰立波 Feng Libo @ AMD  Ext: 20906
> Mobile Phone: [phone]
> Office Phone: [phone]
>
> From: linuxbios-bounces+libo.feng=[e-mail]
> [mailto:linuxbios-bounces+libo.feng=[e-mail]]
> On Behalf Of AlexHuang
> Sent: Monday, April 30, 2007 5:19 PM
> To: [e-mail]
> Subject: [LinuxBIOS] set fiv fail
>
> Hi all,
>
> I got an error message from linuxbios as below:
>
> The CPU on my platform is Sempron. Why do I get "set fid failed for apicid
> =00" and how to solve this issue??
>
> On the other hand, I got error message as follow:
>
> Ram2.00
>
> No memory for this cpu
>
> I have no idea how to solve this issue.  Can somebody give me a suggestion
> how to find the bug out??
>
> Thanks for your help
>
> Alex
>
> LinuxBIOS-1.1.8_m57sli_Fallback 一  16:26:52 CST 2007 starting...
>
> *sysinfo range: [000cf000,000cf730)
>
> bsp_apicid=00
>
> core0 started:
>
> started ap apicid:  01
>
> SBLink=00
>
> NC node|link=00
>
> begin msr fid, vid 31061212060e0202
>
> set fid failed for apicid =00
>
> end   msr fid, vid 31061206060e0202
>
> mcp55_num:00
>
> ht reset -
>
> SMBus controller enabled
>
> Ram1.00
>
> Ram2.00
>
> No memory for this cpu
>
> Ram3
>
> No memory

[Feng, Libo]

Our GCC is 4.0.0. We will try a new version GCC. Thank you.

Best Regards

丰立波 Feng Libo @ AMD  Ext: 20906
Mobile Phone: [phone]
Office Phone: [phone]

-----Original Message-----
From: yhlu [mailto:[e-mail]] 
Sent: Tuesday, May 08, 2007 12:14 PM
To: Feng, Libo
Cc: AlexHuang; [e-mail]
Subject: Re: [LinuxBIOS] set fiv fail

Alex's problem: the SPDROM address setting is not right. So can not find RAM.

I wonder what is your gcc version. Please use fcc 4.0.2 or 4.1.1. Some gcc make bad optimizaiton.

YH

On 5/7/07, Feng, Libo  wrote:
> Yes, we also met the second problem mentioned. It is caused by the DQS 
> write and read training failure, but we didn't know how to fix it 
> because RAM initialization is very complicated. Then we wanted to get 
> more trace information, so we enabled DQS_TRAIN_DEBUG in 
> /amd/amdk8/raminit_f_dqs.c, it was a big surprise that the RAM 
> initialization was passed. All were done based on AMD Athlon 64x2. 
> Just for your reference. Mr. Lu Yinghai owns the file, maybe he can give more technical explanation.
>
> Best Regards
>
> 丰立波 Feng Libo @ AMD  Ext: 20906
> Mobile Phone: [phone]
> Office Phone: [phone]
>
> From: linuxbios-bounces+libo.feng=[e-mail]
> [mailto:linuxbios-bounces+libo.feng=[e-mail]]
> On Behalf Of AlexHuang
> Sent: Monday, April 30, 2007 5:19 PM
> To: [e-mail]
> Subject: [LinuxBIOS] set fiv fail
>
> Hi all,
>
> I got an error message from linuxbios as below:
>
> The CPU on my platform is Sempron. Why do I get "set fid failed for 
> apicid =00" and how to solve this issue??
>
> On the other hand, I got error message as follow:
>
> Ram2.00
>
> No memory for this cpu
>
> I have no idea how to solve this issue.  Can somebody give me a 
> suggestion how to find the bug out??
>
> Thanks for your help
>
> Alex
>
> LinuxBIOS-1.1.8_m57sli_Fallback 一  16:26:52 CST 2007 starting...
>
> *sysinfo range: [000cf000,000cf730)
>
> bsp_apicid=00
>
> core0 started:
>
> started ap apicid:  01
>
> SBLink=00
>
> NC node|link=00
>
> begin msr fid, vid 31061212060e0202
>
> set fid failed for apicid =00
>
> end   msr fid, vid 31061206060e0202
>
> mcp55_num:00
>
> ht reset -
>
> SMBus controller enabled
>
> Ram1.00
>
> Ram2.00
>
> No memory for this cpu
>
> Ram3
>
> No memory

[Feng, Libo]

Oh, I remember that we also changed SMBUS_HUB in the function activate_spd_rom in cache_as_ram_auto.c because we couldn't get correct data from SPDROM at first.

Best Regards

丰立波 Feng Libo @ AMD  Ext: 20906
Mobile Phone: [phone]
Office Phone: [phone]

-----Original Message-----
From: yhlu [mailto:[e-mail]] 
Sent: Tuesday, May 08, 2007 12:14 PM
To: Feng, Libo
Cc: AlexHuang; [e-mail]
Subject: Re: [LinuxBIOS] set fiv fail

Alex's problem: the SPDROM address setting is not right. So can not find RAM.

I wonder what is your gcc version. Please use fcc 4.0.2 or 4.1.1. Some gcc make bad optimizaiton.

YH

On 5/7/07, Feng, Libo  wrote:
> Yes, we also met the second problem mentioned. It is caused by the DQS 
> write and read training failure, but we didn't know how to fix it 
> because RAM initialization is very complicated. Then we wanted to get 
> more trace information, so we enabled DQS_TRAIN_DEBUG in 
> /amd/amdk8/raminit_f_dqs.c, it was a big surprise that the RAM 
> initialization was passed. All were done based on AMD Athlon 64x2. 
> Just for your reference. Mr. Lu Yinghai owns the file, maybe he can give more technical explanation.
>
> Best Regards
>
> 丰立波 Feng Libo @ AMD  Ext: 20906
> Mobile Phone: [phone]
> Office Phone: [phone]
>
> From: linuxbios-bounces+libo.feng=[e-mail]
> [mailto:linuxbios-bounces+libo.feng=[e-mail]]
> On Behalf Of AlexHuang
> Sent: Monday, April 30, 2007 5:19 PM
> To: [e-mail]
> Subject: [LinuxBIOS] set fiv fail
>
> Hi all,
>
> I got an error message from linuxbios as below:
>
> The CPU on my platform is Sempron. Why do I get "set fid failed for 
> apicid =00" and how to solve this issue??
>
> On the other hand, I got error message as follow:
>
> Ram2.00
>
> No memory for this cpu
>
> I have no idea how to solve this issue.  Can somebody give me a 
> suggestion how to find the bug out??
>
> Thanks for your help
>
> Alex
>
> LinuxBIOS-1.1.8_m57sli_Fallback 一  16:26:52 CST 2007 starting...
>
> *sysinfo range: [000cf000,000cf730)
>
> bsp_apicid=00
>
> core0 started:
>
> started ap apicid:  01
>
> SBLink=00
>
> NC node|link=00
>
> begin msr fid, vid 31061212060e0202
>
> set fid failed for apicid =00
>
> end   msr fid, vid 31061206060e0202
>
> mcp55_num:00
>
> ht reset -
>
> SMBus controller enabled
>
> Ram1.00
>
> Ram2.00
>
> No memory for this cpu
>
> Ram3
>
> No memory