SAME Thanks for you help though... still working on this. The Docs say FILO can boot a regular kernel, bzImage, memtest, elf images etc... So I don't know why it was complaining about it not being an ELF. I just thought that was the default. Still same err though. ----------------------------------------------
boot: hda1:/boot/memtest86/memtest.elf console=tty0 console=ttyS0,115200n8 malloc_diag: alloc: 456 bytes (5 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 472 bytes (6 blocks), free: 15904 bytes (1 blocks) file_open: dev=hda1, path=/boot/memtest86/memtest.elf find_ide_controller: found PCI IDE controller 10de:0053 prog_if=0x8a find_ide_controller: primary channel: compatibility mode find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4 ide_software_reset: Waiting for ide0 to become ready for reset... ok init_drive: Testing for hda init_drive: Probing for hda init_drive: LBA mode, sectors=1019088 init_drive: Init device params... ok hda: LBA 521MB: SILICONSYSTEMS INC 512MB init_drive: Testing for hdb init_drive: Testing for hdb devopen: Partition 1 start 59 length 1018989 Mounted ext2fs malloc_diag: alloc: 456 bytes (5 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 528 bytes (6 blocks), free: 15848 bytes (1 blocks) Loading image... load_segments: segment 0 addr:0x10000 file:0x155f4 mem:0x155f4 loading... clearing... ok load_segments: Loaded 87540 bytes in 568ms (154KB/s) malloc_diag: alloc: 792 bytes (7 blocks), free: 15584 bytes (1 blocks) elf_load: current time: 36403 elf_load: entry point is 0x10000 Jumping to entry point...
INIT detected from ---- {APICID = 00 NODEID = 00 COREID = 00} ---
Issuing SOFT_RESET... ------------------------------------------
Thank you steve
__________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
-
steve yannalfo