On 15.06.2017 07:31, Dhanasekar Jaganathan wrote:
Hi Nico/Taiidan,
After entering "*syslinux_configfile (*", when I press *TAB, I* I am not seeing anything (nothing is coming)..
So, I have tried this command *"syslinux_configfile (usb0)/boot/grub/grub.cfg" *and got the error (Kernel without label).
Read what Taiidan wrote carefully:
also configfile (ahci0,msdos1)/grub2/grub.cfg to load a grub cfg
For a grub.cfg, it's a plain *configfile* (not syslinux_configfile).
Nico
My USB ONIE installers has following files,
*/initrd.xz*
*/vmlinuz*
*/boot/boot.cat http://boot.cat*
*/boot/eltorito.img*
*/boot/grub/gurb.cfg*
*/boot/i386-PC/ *.mod (Lot of .mod files)*
Thanks, Dhanasekar
On Thu, Jun 15, 2017 at 5:01 AM, Nico Huber nico.h@gmx.de wrote:
Hi Dhanasekar,
On 14.06.2017 11:21, Dhanasekar Jaganathan wrote:
Hi Taiidan,
My USB ONIE installers don't have "isolinux/syslinux.cfg". It has "boot/grub/grub.cfg".
When I try to run "syslinux_configfile (usb0)/boot/grub/grub.cfg" in GRUB command line, I am getting "*kernel without label*" error.
Please provide your commands
Taiidan already told you the correct command name (33 lines below). You might have missed it ;)
Nico
Thanks, Dhanasekar
On Wed, Jun 14, 2017 at 3:22 AM, Taiidan@gmx.com Taiidan@gmx.com
wrote:
On 06/13/2017 10:22 AM, Dhanasekar Jaganathan wrote:
Hi All,
I am trying to install ONIE from USB which has ONIE installer.
Actually, I
am using GRUB2 as a payload. If Coreboot display list of bootable device,I can select USB which will install a OS in the hard disk. As I
understood
that Coreboot won't display list of available bootable device (not like vendor bios).I don't know how to give control to bootable USB or boot a bootable USB by coreboot. Can you please help me on this?.
Thanks, Dhanasekar
Assuming you are booting a standard linux distro iso: syslinux_configfile (*TAB* to see what is available
then simply for instance syslinux_configfile (usb0,msdos1)/isolinux/
syslinux.cfg
(or w/e)
also configfile (ahci0,msdos1)/grub2/grub.cfg to load a grub cfg
Ideally you would add a grub cfg to the coreboot image that does
something
like load a config file from a specified local disk so that it is easy
to
update (ie: no re-flashing) instructions for that are on the wiki.
SeaBIOS would provide the classic AMI style F12 selection menu, but I don't like it due to how many times I have accidentally enabled option
rom
execution by forgetting to include the configuration file.