Issues porting the Iwave raibowG6

[Den nis]

Hi,

Im trying to "port" the iwave RainbowG6 coreboot code to a platform with the
same CPU (Intel Atom Z530) and chipset (Intel US15W), 1GB RAM (2 ranks, 1024
Mbits device density, x16 device width) and a winbond WPCN381U superio chip.

Meanwhile the basic functionalities of Coreboot seems to works well. But
when i jump to my payload everthing become quiet.
I suspect that something went wrong with the tables.
I have include the build process and the serial port output (debug level =
SPEW).

I hope someone has a tip so I can go further.

Many thanks in advance!

Dennis

[Stefan Reinauer]

On 26.04.2011, at 07:40, Den nis  wrote:
> Hi,
>
> Im trying to "port" the iwave RainbowG6 coreboot code to a platform with the same CPU (Intel Atom Z530) and chipset (Intel US15W), 1GB RAM (2 ranks, 1024 Mbits device density, x16 device width) and a winbond WPCN381U superio chip.
>
> Meanwhile the basic functionalities of Coreboot seems to works well. But when i jump to my payload everthing become quiet.
> I suspect that something went wrong with the tables.
> I have include the build process and the serial port output (debug level = SPEW).
>
> I hope someone has a tip so I can go further.

Your log claims in ramstage you have 0mb memory. That's fishy.

Stefan
> Many thanks in advance!
>
> Dennis
> <console_process.txt>
> <build_process.txt>
>
> coreboot mailing list: [e-mail]
> http://www.coreboot.org/mailman/listinfo/coreboot