On Tue, Feb 23, 2010 at 8:37 AM, Patrick Georgi
<patrick@georgi-clan.de> wrote:
Am 24.09.2009 22:59, schrieb Myles Watson:
> Based on that, here's a patch that changes drivers that aren't console,
> pci, or cpu, to obj.
>
> The most common one was mainboard.c as a driver.
>
> Boot tested with Tyan s2895.
>
> Signed-off-by: Myles Watson <
mylesgw@gmail.com>
I updated the patch, with all the boards converted that appeared in
Kconfig after this patch was made, too. There's not a single driver in
src/mainboard left.
Signed-off-by: Patrick Georgi <patrick.georgi@coresystems.de>
Index: src/mainboard/roda/rk886ex/Makefile.inc
===================================================================
--- src/mainboard/roda/rk886ex/Makefile.inc (revision 5149)
+++ src/mainboard/roda/rk886ex/Makefile.inc (working copy)
@@ -21,10 +21,10 @@
## This mainboard requires DCACHE_AS_RAM enabled. It won't work without.
##
-driver-y += mainboard.o
-driver-y += m3885.o
-driver-y += ec.o
-driver-y += rtl8168.o
+obj-y += mainboard.o
+obj-y += m3885.o
+obj-y += ec.o
+obj-y += rtl8168.o
It looks like rtl8168 should stay a driver, since it's a PCI device. I don't know about m3885.o and ec.o. I'm also not sure about the debug devices. Are they considered PCI? It's been a long time since I thought about this.
Thanks,
Myles