Well, it doesn't. As for the VGA BIOS I get "make: *** No rule to make target `systemagent-r6.bin', needed by `build/coreboot.pre1'.  Stop." It only seems to pull in the descriptor and ME binaries, at least those are the only ones in 3rdparty directory.

John. 

On 23/07/2013 22:33, ron minnich wrote:

If you set that, and you enable 3rd party binaries, it should get it just fine.

ron

On Tue, Jul 23, 2013 at 2:31 PM, John Lewis <jlewis@johnlewis.ie> wrote:

So, I have been trying to do as Ron suggested. First obstacle is VGA BIOS isn't pulled in automatically. I managed to extract that from existing BIOS using fmap_decode and cbfstool, as per the VMX Hacking instructions on the Chromium website, and Coreboot builds, but I'm left with a brick. Can anyone advise what to do/try next? I've also noticed an option which says "Add a system agent binary" in the Northbridge setup, the help for which says "Without this binary Coreboot will not work". Do I need this, and if so where do I get it? On 22/07/2013 17:58, ron minnich wrote:

you need a vga bios for now. You must have the ME firmware. Try this: make menuconfig go to general setup enable the 'third party binaries' menu item (or whatever it's called) they should now get downloaded automagically. Do a cbfstool build/coreboot.rom print before and after this step, and it should look different. ron

-- coreboot mailing list: coreboot@coreboot.org http://www.coreboot.org/mailman/listinfo/coreboot