[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.34-libre (xdrudis@massagran) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP PREEMPT Sun May 30 23:31:45 CEST 2010 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34-libre root=/dev/sda1 ro console=tty0 console=ttyS0,115200 acpi=off quiet [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable) [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff98000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff98000 - 00000000cffd0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000230000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x230000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-EFFFF uncachable [ 0.000000] F0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back [ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back [ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] TOM2: 0000000230000000 aka 8960M [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000 [ 0.000000] 0000000000 - 00c0000000 page 1G [ 0.000000] 00c0000000 - 00cfe00000 page 2M [ 0.000000] 00cfe00000 - 00cff80000 page 4k [ 0.000000] kernel direct mapping tables up to cff80000 @ 16000-19000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000230000000 [ 0.000000] 0100000000 - 0200000000 page 1G [ 0.000000] 0200000000 - 0230000000 page 2M [ 0.000000] kernel direct mapping tables up to 230000000 @ 18000-1a000 [ 0.000000] [ffffea0000000000-ffffea0007bfffff] PMD -> [ffff880006400000-ffff88000d5fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00230000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009e [ 0.000000] 0: 0x00000100 -> 0x000cff80 [ 0.000000] 0: 0x00100000 -> 0x00230000 [ 0.000000] On node 0 totalpages: 2096910 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3926 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31 [ 0.000000] Normal zone: 17024 pages used for memmap [ 0.000000] Normal zone: 1228160 pages, LIFO batch:31 [ 0.000000] Intel MultiProcessor Specification v1.4 [ 0.000000] MPTABLE: OEM ID: ASUS [ 0.000000] MPTABLE: Product ID: [ 0.000000] MPTABLE: APIC at: 0xFEE00000 [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] Processor #1 [ 0.000000] Processor #2 [ 0.000000] Processor #3 [ 0.000000] I/O APIC #4 Version 33 at 0xFEC00000. [ 0.000000] Processors: 4 [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 24 [ 0.000000] early_res array is doubled to 64 at [19000 - 197ff] [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000 [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000 [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff98000 [ 0.000000] PM: Registered nosave memory: 00000000cff98000 - 00000000cffd0000 [ 0.000000] PM: Registered nosave memory: 00000000cffd0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ff700000 [ 0.000000] PM: Registered nosave memory: 00000000ff700000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2f700000) [ 0.000000] setup_percpu: NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff880006000000 s82472 r8192 d24024 u524288 [ 0.000000] pcpu-alloc: s82472 r8192 d24024 u524288 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 1 2 3 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2065550 [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.34-libre root=/dev/sda1 ro console=tty0 console=ttyS0,115200 acpi=off quiet [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ e804000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000 [ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000 [ 0.000000] early_res array is doubled to 128 at [19800 - 1a7ff] [ 0.000000] Subtract (60 early reservations) [ 0.000000] #1 [0001000000 - 0005be0d64] TEXT DATA BSS [ 0.000000] #2 [0005be1000 - 0005be1350] BRK [ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved [ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf [ 0.000000] #5 [000009ec00 - 00000f0900] BIOS reserved [ 0.000000] #6 [00000f0a84 - 00000ff780] BIOS reserved [ 0.000000] #7 [00000f0900 - 00000f0a84] MP-table mpc [ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #9 [0000012000 - 0000016000] ACPI WAKEUP [ 0.000000] #10 [0000016000 - 0000018000] PGTABLE [ 0.000000] #11 [0000018000 - 0000019000] PGTABLE [ 0.000000] #12 [0005be1380 - 0005be2380] BOOTMEM [ 0.000000] #13 [0005fe2380 - 0005fe2980] BOOTMEM [ 0.000000] #14 [00063e3000 - 00063e4000] BOOTMEM [ 0.000000] #15 [00063e4000 - 00063e5000] BOOTMEM [ 0.000000] #16 [0006400000 - 000d600000] MEMMAP 0 [ 0.000000] #17 [0005be0d80 - 0005be0f00] BOOTMEM [ 0.000000] #18 [0005be2380 - 0005bfa380] BOOTMEM [ 0.000000] #19 [0005bfa380 - 0005c12380] BOOTMEM [ 0.000000] #20 [0005c13000 - 0005c14000] BOOTMEM [ 0.000000] #21 [0005be0f00 - 0005be0f43] BOOTMEM [ 0.000000] #22 [0005c12380 - 0005c125b0] BOOTMEM [ 0.000000] #23 [0005be0f80 - 0005be0fe8] BOOTMEM [ 0.000000] #24 [0005c125c0 - 0005c12628] BOOTMEM [ 0.000000] #25 [0005c12640 - 0005c126a8] BOOTMEM [ 0.000000] #26 [0005c126c0 - 0005c12728] BOOTMEM [ 0.000000] #27 [0005c12740 - 0005c127a8] BOOTMEM [ 0.000000] #28 [0005c127c0 - 0005c12828] BOOTMEM [ 0.000000] #29 [0005c12840 - 0005c128a8] BOOTMEM [ 0.000000] #30 [0005c128c0 - 0005c12928] BOOTMEM [ 0.000000] #31 [0005c12940 - 0005c129a8] BOOTMEM [ 0.000000] #32 [0005c129c0 - 0005c129e0] BOOTMEM [ 0.000000] #33 [0005c12a00 - 0005c12a20] BOOTMEM [ 0.000000] #34 [0005c12a40 - 0005c12aa9] BOOTMEM [ 0.000000] #35 [0005c12ac0 - 0005c12b29] BOOTMEM [ 0.000000] #36 [0006000000 - 000601c000] BOOTMEM [ 0.000000] #37 [0006080000 - 000609c000] BOOTMEM [ 0.000000] #38 [0006100000 - 000611c000] BOOTMEM [ 0.000000] #39 [0006180000 - 000619c000] BOOTMEM [ 0.000000] #40 [0005c12b40 - 0005c12b48] BOOTMEM [ 0.000000] #41 [0005c12b80 - 0005c12b88] BOOTMEM [ 0.000000] #42 [0005c12bc0 - 0005c12bd0] BOOTMEM [ 0.000000] #43 [0005c12c00 - 0005c12c20] BOOTMEM [ 0.000000] #44 [0005c12c40 - 0005c12d70] BOOTMEM [ 0.000000] #45 [0005c12d80 - 0005c12dd0] BOOTMEM [ 0.000000] #46 [0005c12e00 - 0005c12e50] BOOTMEM [ 0.000000] #47 [0005c14000 - 0005c14200] BOOTMEM [ 0.000000] #48 [0005c14200 - 0005c14400] BOOTMEM [ 0.000000] #49 [0005c14400 - 0005c14600] BOOTMEM [ 0.000000] #50 [0005c14600 - 0005c14800] BOOTMEM [ 0.000000] #51 [0005c14800 - 0005c1c800] BOOTMEM [ 0.000000] #52 [000d600000 - 000de00000] BOOTMEM [ 0.000000] #53 [000de00000 - 000e200000] BOOTMEM [ 0.000000] #54 [0020000000 - 0024000000] BOOTMEM [ 0.000000] #55 [0005c12e80 - 0005c12ea0] BOOTMEM [ 0.000000] #56 [000e200000 - 0012200000] BOOTMEM [ 0.000000] #57 [0005c1c800 - 0005c3c800] BOOTMEM [ 0.000000] #58 [0005c3c800 - 0005c7c800] BOOTMEM [ 0.000000] #59 [000001a800 - 0000022800] BOOTMEM [ 0.000000] Memory: 8048688k/9175040k available (3793k kernel code, 787400k absent, 338952k reserved, 2741k data, 480k init) [ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is enabled. [ 0.000000] NR_IRQS:4352 [ 0.000000] spurious 8259A interrupt: IRQ7. [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2618.083 MHz processor. [ 0.002003] Calibrating delay loop (skipped), value calculated using timer frequency.. 5236.16 BogoMIPS (lpj=2618080) [ 0.002023] Security Framework initialized [ 0.002026] SELinux: Disabled at boot. [ 0.003004] Mount-cache hash table entries: 256 [ 0.003093] Initializing cgroup subsys ns [ 0.003096] Initializing cgroup subsys cpuacct [ 0.003099] Initializing cgroup subsys devices [ 0.003101] Initializing cgroup subsys freezer [ 0.003116] tseg: 0000000000 [ 0.003124] CPU: Physical Processor ID: 0 [ 0.003125] CPU: Processor Core ID: 0 [ 0.003127] mce: CPU supports 6 MCE banks [ 0.003134] using C1E aware idle routine [ 0.003136] Performance Events: AMD PMU driver. [ 0.003139] ... version: 0 [ 0.003140] ... bit width: 48 [ 0.003142] ... generic registers: 4 [ 0.003143] ... value mask: 0000ffffffffffff [ 0.003145] ... max period: 00007fffffffffff [ 0.003146] ... fixed-purpose events: 0 [ 0.003148] ... event mask: 000000000000000f [ 0.003202] Setting APIC routing to flat [ 0.003262] ExtINT not setup in hardware but reported by MP table [ 0.003585] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.013594] CPU0: AMD Phenom(tm) II X4 910e Processor stepping 03 [ 0.115030] System has AMD C1E enabled [ 0.115040] Switch to broadcast mode on CPU0 [ 0.121026] Booting Node 0, Processors #1 [ 0.193017] Switch to broadcast mode on CPU1 [ 0.196033] #2 [ 0.268018] Switch to broadcast mode on CPU2 [ 0.271038] #3 Ok. [ 0.343021] Brought up 4 CPUs [ 0.343023] Total of 4 processors activated (20941.89 BogoMIPS). [ 0.343019] Switch to broadcast mode on CPU3 [ 0.345131] regulator: core version 0.5 [ 0.345131] NET: Registered protocol family 16 [ 0.345131] node 0 link 0: io port [1000, ffffff] [ 0.345131] TOM: 00000000d0000000 aka 3328M [ 0.345131] Fam 10h mmconf [e0000000, efffffff] [ 0.345131] node 0 link 0: mmio [e0000000, efffffff] ==> none [ 0.345131] node 0 link 0: mmio [f0000000, ffffffff] [ 0.345131] node 0 link 0: mmio [a0000, bffff] [ 0.345131] node 0 link 0: mmio [d0000000, dfffffff] [ 0.345131] TOM2: 0000000230000000 aka 8960M [ 0.345131] bus: [00, 07] on node 0 link 0 [ 0.345131] bus: 00 index 0 [io 0x0000-0xffff] [ 0.345131] bus: 00 index 1 [mem 0xf0000000-0xffffffff] [ 0.345131] bus: 00 index 2 [mem 0x000a0000-0x000bffff] [ 0.345131] bus: 00 index 3 [mem 0xd0000000-0xdfffffff] [ 0.345131] bus: 00 index 4 [mem 0x230000000-0xfcffffffff] [ 0.345131] PCI: Using configuration type 1 for base access [ 0.345131] PCI: Using configuration type 1 for extended access [ 0.348014] bio: create slab at 0 [ 0.348027] ACPI: Interpreter disabled. [ 0.348027] vgaarb: loaded [ 0.348037] SCSI subsystem initialized [ 0.348037] libata version 3.00 loaded. [ 0.348037] usbcore: registered new interface driver usbfs [ 0.348037] usbcore: registered new interface driver hub [ 0.348037] usbcore: registered new device driver usb [ 0.348037] PCI: Probing PCI hardware [ 0.348037] PCI: Probing PCI hardware (bus 00) [ 0.349059] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.349061] pci 0000:00:02.0: PME# disabled [ 0.349098] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold [ 0.349101] pci 0000:00:0a.0: PME# disabled [ 0.349140] pci 0000:00:11.0: reg 10: [io 0xc000-0xc007] [ 0.349146] pci 0000:00:11.0: reg 14: [io 0xb000-0xb003] [ 0.349152] pci 0000:00:11.0: reg 18: [io 0xa000-0xa007] [ 0.349158] pci 0000:00:11.0: reg 1c: [io 0x9000-0x9003] [ 0.349165] pci 0000:00:11.0: reg 20: [io 0x8000-0x800f] [ 0.349171] pci 0000:00:11.0: reg 24: [mem 0xf7fffc00-0xf7ffffff] [ 0.349187] pci 0000:00:11.0: set SATA to AHCI mode [ 0.349228] pci 0000:00:12.0: reg 10: [mem 0xf7ffe000-0xf7ffefff] [ 0.349278] pci 0000:00:12.1: reg 10: [mem 0xf7ffd000-0xf7ffdfff] [ 0.349338] pci 0000:00:12.2: reg 10: [mem 0xf7fff800-0xf7fff8ff] [ 0.349386] pci 0000:00:12.2: supports D1 D2 [ 0.349388] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot [ 0.349392] pci 0000:00:12.2: PME# disabled [ 0.349421] pci 0000:00:13.0: reg 10: [mem 0xf7ffc000-0xf7ffcfff] [ 0.349471] pci 0000:00:13.1: reg 10: [mem 0xf7ffb000-0xf7ffbfff] [ 0.349531] pci 0000:00:13.2: reg 10: [mem 0xf7fff400-0xf7fff4ff] [ 0.349579] pci 0000:00:13.2: supports D1 D2 [ 0.349581] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot [ 0.349585] pci 0000:00:13.2: PME# disabled [ 0.349684] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007] [ 0.349690] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003] [ 0.349696] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007] [ 0.349702] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003] [ 0.349708] pci 0000:00:14.1: reg 20: [io 0xff00-0xff0f] [ 0.349765] pci 0000:00:14.2: reg 10: [mem 0xf7ff4000-0xf7ff7fff 64bit] [ 0.349805] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold [ 0.349808] pci 0000:00:14.2: PME# disabled [ 0.349903] pci 0000:00:14.5: reg 10: [mem 0xf7ffa000-0xf7ffafff] [ 0.349999] PCI: peer root bus 00 res updated from pci conf [ 0.350037] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff] [ 0.350043] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.350050] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit] [ 0.350054] pci 0000:01:00.0: reg 24: [io 0xdc00-0xdc7f] [ 0.350058] pci 0000:01:00.0: reg 30: [mem 0xfbee0000-0xfbefffff pref] [ 0.352017] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.352022] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.352025] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbefffff] [ 0.352029] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.352072] pci 0000:02:00.0: reg 10: [io 0xe800-0xe8ff] [ 0.352086] pci 0000:02:00.0: reg 18: [mem 0xf6fff000-0xf6ffffff 64bit pref] [ 0.352096] pci 0000:02:00.0: reg 20: [mem 0xf6ff8000-0xf6ffbfff 64bit pref] [ 0.352102] pci 0000:02:00.0: reg 30: [mem 0xfbff0000-0xfbffffff pref] [ 0.352131] pci 0000:02:00.0: supports D1 D2 [ 0.352133] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.352136] pci 0000:02:00.0: PME# disabled [ 0.354019] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.354024] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.354027] pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.354030] pci 0000:00:0a.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.354092] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode) [ 0.354096] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled) [ 0.354100] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 0.354104] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 0.354107] pci 0000:00:14.4: bridge window [io 0x0000-0xffff] (subtractive decode) [ 0.354109] pci 0000:00:14.4: bridge window [mem 0xf0000000-0xffffffff] (subtractive decode) [ 0.354111] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 0.354113] pci 0000:00:14.4: bridge window [mem 0xd0000000-0xdfffffff] (subtractive decode) [ 0.354115] pci 0000:00:14.4: bridge window [mem 0x230000000-0xfcffffffff] (subtractive decode) [ 0.354153] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none [ 0.355017] pci 0000:00:14.3: default IRQ router [1002:439d] [ 0.355027] PCI: pci_cache_line_size set to 64 bytes [ 0.355090] reserve RAM buffer: 000000000009ec00 - 000000000009ffff [ 0.355092] reserve RAM buffer: 00000000cff80000 - 00000000cfffffff [ 0.355106] Switching to clocksource tsc [ 0.355779] pnp: PnP ACPI: disabled [ 0.356228] pci 0000:00:02.0: PCI bridge to [bus 01-01] [ 0.356230] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff] [ 0.356233] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbefffff] [ 0.356236] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.356240] pci 0000:00:0a.0: PCI bridge to [bus 02-02] [ 0.356242] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff] [ 0.356245] pci 0000:00:0a.0: bridge window [mem 0xfbf00000-0xfbffffff] [ 0.356247] pci 0000:00:0a.0: bridge window [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.356251] pci 0000:00:14.4: PCI bridge to [bus 03-03] [ 0.356252] pci 0000:00:14.4: bridge window [io disabled] [ 0.356257] pci 0000:00:14.4: bridge window [mem disabled] [ 0.356260] pci 0000:00:14.4: bridge window [mem pref disabled] [ 0.356273] pci 0000:00:02.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.356276] pci 0000:00:02.0: setting latency timer to 64 [ 0.356281] pci 0000:00:0a.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.356283] pci 0000:00:0a.0: setting latency timer to 64 [ 0.356290] pci_bus 0000:00: resource 4 [io 0x0000-0xffff] [ 0.356292] pci_bus 0000:00: resource 5 [mem 0xf0000000-0xffffffff] [ 0.356294] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 0.356296] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xdfffffff] [ 0.356299] pci_bus 0000:00: resource 8 [mem 0x230000000-0xfcffffffff] [ 0.356301] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff] [ 0.356303] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbefffff] [ 0.356305] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 0.356307] pci_bus 0000:02: resource 0 [io 0xe000-0xefff] [ 0.356309] pci_bus 0000:02: resource 1 [mem 0xfbf00000-0xfbffffff] [ 0.356311] pci_bus 0000:02: resource 2 [mem 0xf6f00000-0xf6ffffff 64bit pref] [ 0.356313] pci_bus 0000:03: resource 4 [io 0x0000-0xffff] [ 0.356315] pci_bus 0000:03: resource 5 [mem 0xf0000000-0xffffffff] [ 0.356317] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff] [ 0.356319] pci_bus 0000:03: resource 7 [mem 0xd0000000-0xdfffffff] [ 0.356321] pci_bus 0000:03: resource 8 [mem 0x230000000-0xfcffffffff] [ 0.356339] NET: Registered protocol family 2 [ 0.356387] IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.356854] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 0.357909] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.358198] TCP: Hash tables configured (established 262144 bind 65536) [ 0.358200] TCP reno registered [ 0.358203] UDP hash table entries: 4096 (order: 5, 131072 bytes) [ 0.358247] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes) [ 0.358349] NET: Registered protocol family 1 [ 0.358499] pci 0000:01:00.0: Boot video device [ 0.358503] PCI: CLS 64 bytes, default 64 [ 0.358670] PCI-DMA: Disabling AGP. [ 0.358786] PCI-DMA: aperture base @ 20000000 size 65536 KB [ 0.358787] PCI-DMA: using GART IOMMU. [ 0.358789] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 0.361962] platform rtc_cmos: registered platform RTC device (no PNP device found) [ 0.363038] audit: initializing netlink socket (disabled) [ 0.363046] type=2000 audit(1300924045.362:1): initialized [ 0.363434] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 0.365366] VFS: Disk quotas dquot_6.5.2 [ 0.365421] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.365794] msgmni has been set to 15848 [ 0.365983] alg: No test for stdrng (krng) [ 0.366065] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.366068] io scheduler noop registered [ 0.366069] io scheduler deadline registered [ 0.366151] io scheduler cfq registered (default) [ 0.366229] pcieport 0000:00:02.0: setting latency timer to 64 [ 0.366250] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X [ 0.366330] pcieport 0000:00:0a.0: setting latency timer to 64 [ 0.366348] pcieport 0000:00:0a.0: irq 25 for MSI/MSI-X [ 0.366484] pcie_pme: probe of 0000:00:02.0:pcie01 failed with error -13 [ 0.366488] pcie_pme: probe of 0000:00:0a.0:pcie01 failed with error -13 [ 0.366638] nvidiafb 0000:01:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 0.368163] nvidiafb: Device ID: 10de06e4 [ 0.368164] nvidiafb: unknown NV_ARCH [ 0.374979] Linux agpgart interface v0.103 [ 0.375014] [drm] Initialized drm 1.1.0 20060810 [ 0.375055] nouveau 0000:01:00.0: setting latency timer to 64 [ 0.377371] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298200a2) [ 0.380496] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 0.428141] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 0.428144] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 0.428146] [drm] nouveau 0000:01:00.0: Bios version 62.98.71.00 [ 0.428149] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported [ 0.428151] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 0.428154] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028 [ 0.428156] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030 [ 0.428158] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028 [ 0.428160] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 0.428163] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07 [ 0.428165] [drm] nouveau 0000:01:00.0: 1: 0x00000200: type 0x00 idx 1 tag 0xff [ 0.428171] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD691 [ 0.456797] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDA96 [ 0.465684] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE392 [ 0.465692] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE460 [ 0.467754] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xE716 [ 0.467757] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xE77B [ 0.488680] [drm] nouveau 0000:01:00.0: 0xE77B: Condition still not met after 20ms, skipping following opcodes [ 0.488687] [drm] nouveau 0000:01:00.0: 0xC4C8: parsing output script 0 [ 0.488696] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM [ 0.560886] [TTM] Zone kernel: Available graphics memory: 4057314 kiB. [ 0.560888] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 0.573213] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 0.575682] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 0.578437] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 0.578978] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 0.578980] [drm] nouveau 0000:01:00.0: Detected a TMDS output [ 0.578982] [drm] nouveau 0000:01:00.0: Detected a DAC output [ 0.578984] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector [ 0.579108] [drm] nouveau 0000:01:00.0: Detected a VGA connector [ 0.754524] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x40250000, bo ffff88022f669200 [ 0.759081] [drm] nouveau 0000:01:00.0: 0x11C1: parsing clock script 0 [ 0.760221] Console: switching to colour frame buffer device 128x48 [ 0.761210] fb0: nouveaufb frame buffer device [ 0.761211] registered panic notifier [ 0.761214] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 0.761289] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.761414] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 0.762360] loop: module loaded [ 0.762372] Uniform Multi-Platform E-IDE driver [ 0.762442] atiixp 0000:00:14.1: IDE controller (0x1002:0x439c rev 0x00) [ 0.762453] pci 0000:00:14.1: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 0.762465] atiixp 0000:00:14.1: not 100% native mode: will probe irqs later [ 0.762470] ide0: BM-DMA at 0xff00-0xff07 [ 0.762477] ide1: BM-DMA at 0xff08-0xff0f [ 0.762481] Probing IDE interface ide0... [ 1.280601] Probing IDE interface ide1... [ 1.799522] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 1.799534] ide1 at 0x170-0x177,0x376 on irq 15 [ 1.799616] ide-gd driver 1.18 [ 1.799740] ahci 0000:00:11.0: version 3.0 [ 1.799753] ahci 0000:00:11.0: PCI->APIC IRQ transform: INT A -> IRQ 22 [ 1.799838] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode [ 1.799841] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc [ 1.800033] scsi0 : ahci [ 1.800107] scsi1 : ahci [ 1.800162] scsi2 : ahci [ 1.800220] scsi3 : ahci [ 1.800262] ata1: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffd00 irq 22 [ 1.800265] ata2: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffd80 irq 22 [ 1.800268] ata3: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffe00 irq 22 [ 1.800271] ata4: SATA max UDMA/133 abar m1024@0xf7fffc00 port 0xf7fffe80 irq 22 [ 1.800611] PNP: No PS/2 controller found. Probing ports directly. [ 1.800976] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.800981] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.801120] mice: PS/2 mouse device common for all mice [ 1.801234] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 [ 1.801254] rtc0: alarms up to one day, 114 bytes nvram [ 1.801282] cpuidle: using governor ladder [ 1.801283] cpuidle: using governor menu [ 1.801287] No iBFT detected. [ 1.801493] TCP cubic registered [ 1.801496] NET: Registered protocol family 17 [ 1.801612] registered taskstats version 1 [ 1.801804] rtc_cmos rtc_cmos: setting system clock to 2011-03-23 23:47:27 UTC (1300924047) [ 1.833744] input: AT Translated Set 2 keyboard as /class/input/input0 [ 2.104423] ata2: SATA link down (SStatus 0 SControl 300) [ 2.105408] ata4: SATA link down (SStatus 0 SControl 300) [ 2.105411] ata3: SATA link down (SStatus 0 SControl 300) [ 2.257370] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.258507] ata1.00: ATA-8: ST31000528AS, CC38, max UDMA/133 [ 2.258510] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 2.259798] ata1.00: configured for UDMA/133 [ 2.270430] scsi 0:0:0:0: Direct-Access ATA ST31000528AS CC38 PQ: 0 ANSI: 5 [ 2.270617] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2.270669] sd 0:0:0:0: [sda] Write Protect is off [ 2.270671] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.270683] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.270772] sda: sda1 sda2 < sda5 > [ 2.322356] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.377419] kjournald starting. Commit interval 5 seconds [ 2.377426] EXT3-fs (sda1): mounted filesystem with ordered data mode [ 2.377435] VFS: Mounted root (ext3 filesystem) readonly on device 8:1. [ 2.377444] Freeing unused kernel memory: 480k freed [ 5.516255] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 5.516271] r8169 0000:02:00.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 5.516307] r8169 0000:02:00.0: setting latency timer to 64 [ 5.516344] r8169 0000:02:00.0: irq 26 for MSI/MSI-X [ 5.516521] r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc9000003c000, e0:cb:4e:3e:6d:7e, XID 083000c0 IRQ 26 [ 5.516524] r8169: eth0: Missing Free firmware [ 5.516707] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0 [ 5.529198] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 5.529213] ohci_hcd 0000:00:12.0: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 5.529229] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 5.529234] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1 [ 5.529260] ohci_hcd 0000:00:12.0: irq 16, io mem 0xf7ffe000 [ 5.531355] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 5.531358] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 5.584751] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.584754] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.584756] usb usb1: Product: OHCI Host Controller [ 5.584758] usb usb1: Manufacturer: Linux 2.6.34-libre ohci_hcd [ 5.584759] usb usb1: SerialNumber: 0000:00:12.0 [ 5.584826] hub 1-0:1.0: USB hub found [ 5.584833] hub 1-0:1.0: 3 ports detected [ 5.584896] ehci_hcd 0000:00:12.2: PCI->APIC IRQ transform: INT B -> IRQ 17 [ 5.584919] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 5.584923] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 2 [ 5.584950] ehci_hcd 0000:00:12.2: debug port 1 [ 5.584966] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf7fff800 [ 5.591717] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 5.591733] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.591735] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.591737] usb usb2: Product: EHCI Host Controller [ 5.591738] usb usb2: Manufacturer: Linux 2.6.34-libre ehci_hcd [ 5.591740] usb usb2: SerialNumber: 0000:00:12.2 [ 5.591795] hub 2-0:1.0: USB hub found [ 5.591798] hub 2-0:1.0: 6 ports detected [ 5.591855] ohci_hcd 0000:00:12.1: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 5.591868] ohci_hcd 0000:00:12.1: OHCI Host Controller [ 5.591873] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 3 [ 5.591888] ohci_hcd 0000:00:12.1: irq 16, io mem 0xf7ffd000 [ 5.631003] EDAC MC: Ver: 2.1.0 May 30 2010 [ 5.638032] input: PC Speaker as /class/input/input1 [ 5.647733] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.647736] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.647737] usb usb3: Product: OHCI Host Controller [ 5.647739] usb usb3: Manufacturer: Linux 2.6.34-libre ohci_hcd [ 5.647740] usb usb3: SerialNumber: 0000:00:12.1 [ 5.647797] hub 3-0:1.0: USB hub found [ 5.647803] hub 3-0:1.0: 3 ports detected [ 5.647861] ehci_hcd 0000:00:13.2: PCI->APIC IRQ transform: INT B -> IRQ 19 [ 5.647881] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 5.647885] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4 [ 5.647911] ehci_hcd 0000:00:13.2: debug port 1 [ 5.647927] ehci_hcd 0000:00:13.2: irq 19, io mem 0xf7fff400 [ 5.654693] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 5.654709] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002 [ 5.654711] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.654713] usb usb4: Product: EHCI Host Controller [ 5.654714] usb usb4: Manufacturer: Linux 2.6.34-libre ehci_hcd [ 5.654716] usb usb4: SerialNumber: 0000:00:13.2 [ 5.654768] hub 4-0:1.0: USB hub found [ 5.654771] hub 4-0:1.0: 6 ports detected [ 5.654834] ohci_hcd 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 5.654846] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 5.654850] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 5.654866] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf7ffc000 [ 5.710724] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.710727] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.710729] usb usb5: Product: OHCI Host Controller [ 5.710731] usb usb5: Manufacturer: Linux 2.6.34-libre ohci_hcd [ 5.710732] usb usb5: SerialNumber: 0000:00:13.0 [ 5.710789] hub 5-0:1.0: USB hub found [ 5.710795] hub 5-0:1.0: 3 ports detected [ 5.710882] ohci_hcd 0000:00:13.1: PCI->APIC IRQ transform: INT A -> IRQ 18 [ 5.710903] ohci_hcd 0000:00:13.1: OHCI Host Controller [ 5.710908] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6 [ 5.710925] ohci_hcd 0000:00:13.1: irq 18, io mem 0xf7ffb000 [ 5.766732] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.766735] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.766737] usb usb6: Product: OHCI Host Controller [ 5.766738] usb usb6: Manufacturer: Linux 2.6.34-libre ohci_hcd [ 5.766740] usb usb6: SerialNumber: 0000:00:13.1 [ 5.766795] hub 6-0:1.0: USB hub found [ 5.766800] hub 6-0:1.0: 3 ports detected [ 5.766848] ohci_hcd 0000:00:14.5: PCI->APIC IRQ transform: INT C -> IRQ 18 [ 5.766862] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 5.766867] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7 [ 5.766883] ohci_hcd 0000:00:14.5: irq 18, io mem 0xf7ffa000 [ 5.822706] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 5.822709] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.822711] usb usb7: Product: OHCI Host Controller [ 5.822713] usb usb7: Manufacturer: Linux 2.6.34-libre ohci_hcd [ 5.822714] usb usb7: SerialNumber: 0000:00:14.5 [ 5.822783] hub 7-0:1.0: USB hub found [ 5.822790] hub 7-0:1.0: 2 ports detected [ 5.864727] EDAC amd64_edac: Ver: 3.3.0 May 30 2010 [ 5.864748] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3). [ 5.864755] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load. [ 5.864756] Either enable ECC checking or force module loading by setting 'ecc_enable_override'. [ 5.864757] (Note that use of the override may cause unknown side effects.) [ 5.864761] amd64_edac: probe of 0000:00:18.2 failed with error -22 [ 5.950922] usbcore: registered new interface driver usbserial [ 5.950931] USB Serial support registered for generic [ 5.950942] usbcore: registered new interface driver usbserial_generic [ 5.950943] usbserial: USB Serial Driver core [ 5.962892] USB Serial support registered for GSM modem (1-port) [ 5.962918] usbcore: registered new interface driver option [ 5.962920] option: v0.7.2:USB Driver for GSM modems [ 6.134271] HDA Intel 0000:00:14.2: PCI->APIC IRQ transform: INT A -> IRQ 16 [ 7.792702] Adding 24025172k swap on /dev/sda5. Priority:-1 extents:1 across:24025172k [ 8.363863] EXT3-fs (sda1): using internal journal [ 9.774977] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.812300] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 9.812404] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 9.812406] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or [ 9.812408] sysctl net.netfilter.nf_conntrack_acct=1 to enable it. [ 11.869868] r8169 0000:02:00.0: eth0: link up [ 11.869874] r8169 0000:02:00.0: eth0: link up [ 13.034941] powernow-k8: Found 1 AMD Phenom(tm) II X4 910e Processor processors (4 cpu cores) (version 2.20.00) [ 13.034949] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found. [ 13.034950] [Firmware Bug]: powernow-k8: Try again with latest BIOS. [ 14.062310] NET: Registered protocol family 10 [ 14.062711] lo: Disabled Privacy Extensions [ 14.199347] Connection attempt (UNPRIV): IN=eth0 OUT= MAC= SRC=192.168.1.80 DST=224.0.0.251 LEN=263 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=243 [ 14.377219] parport0: PC-style at 0x378 [PCSPP,TRISTATE] [ 14.377242] parport0: irq 0 detected [ 14.452244] Connection attempt (UNPRIV): IN=eth0 OUT= MAC= SRC=192.168.1.80 DST=224.0.0.251 LEN=263 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=243 [ 14.459376] lp0: using parport0 (polling). [ 14.467389] ppdev: user-space parallel port driver [ 24.527288] eth0: no IPv6 routers present