LinuxBIOS-1.1.8_s2881_Fallback Thu Dec 15 18:45:48 EST 2005 starting...
(0,1) link=00
(1,0) link=00
02 nodes initialized.
 core0:  --- {  APICID = 02 NODEID = 01 COREID = 00} ---
SBLink=02
NC node|link=02
ht reset -


LinuxBIOS-1.1.8_s2881_Fallback Thu Dec 15 18:45:48 EST 2005 starting...
(0,1) link=00
(1,0) link=00
02 nodes initialized.
 core0:  --- {  APICID = 02 NODEID = 01 COREID = 00} ---
SBLink=02
NC node|link=02
Ram1.00
Ram1.01
Ram2.00
Ram2.01
Ram3
Initializing memory:  done
Initializing memory:  done
Ram4
v_esp=000cfd40
cpu_reset = 00000000
Clearing initial memory region: No cache as ram now - Use Ram as Stack now - done
new_cpu_reset = 00000000
Copying LinuxBIOS to ram.
src=fffe0004
dst=00004000
linxbios_ram.bin length = 0001928c
Jumping to LinuxBIOS.
LinuxBIOS-1.1.8_s2881_Fallback Thu Dec 15 18:45:48 EST 2005 booting...
Enumerating buses...
APIC_CLUSTER: 0 enabled
PCI_DOMAIN: 0000 enabled
  PCI: 00:18.3 siblings=1
CPU: APIC: 00 enabled
CPU: APIC: 01 enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] enabled
  PCI: 00:19.3 siblings=1
CPU: APIC: 02 enabled
CPU: APIC: 03 enabled
PCI: pci_scan_bus for bus 0
PCI: 00:18.0 [1022/1100] enabled
PCI: 00:18.1 [1022/1101] enabled
PCI: 00:18.2 [1022/1102] enabled
PCI: 00:18.3 [1022/1103] enabled
PCI: 00:19.0 [1022/1100] enabled
PCI: 00:19.1 [1022/1101] enabled
PCI: 00:19.2 [1022/1102] enabled
PCI: 00:19.3 [1022/1103] enabled
PCI: 01:00.0 [1022/7450] enabled
PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003
PCI: 01:00.0 [1022/7460] enabled
PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007
PCI: pci_scan_bus for bus 1
PCI: 01:01.0 [1022/7450] enabled
PCI: 01:01.1 [1022/7451] enabled
PCI: 01:02.0 [1022/7450] enabled
PCI: 01:02.1 [1022/7451] enabled
PCI: 01:03.0 [1022/7460] enabled
PCI: 01:04.0 [1022/7468] enabled
PCI: 01:04.1 [1022/7469] enabled
PCI: 01:04.2 [1022/746a] enabled
PCI: 01:04.3 [1022/746b] enabled
PCI: pci_scan_bus for bus 2
PCI: 02:09.0 [14e4/1648] enabled
PCI: 02:09.1 [14e4/1648] enabled
Disabling static device: PCI: 02:0a.0
Disabling static device: PCI: 02:0a.1
PCI: pci_scan_bus returning with max=02
PCI: 02: 100MHz PCI-X
PCI: pci_scan_bus for bus 3
PCI: pci_scan_bus returning with max=03
PCI: 03: 133MHz PCI-X
PCI: pci_scan_bus for bus 4
PCI: 04:00.0 [1022/7464] enabled
PCI: 04:00.1 [1022/7464] enabled
PCI: 04:05.0 [1095/3114] enabled
PCI: 04:06.0 [1002/4752] enabled
PCI: pci_scan_bus returning with max=04
PNP: 002e.0 enabled
PNP: 002e.1 disabled
PNP: 002e.2 enabled
PNP: 002e.3 disabled
PNP: 002e.5 enabled
PNP: 002e.6 disabled
PNP: 002e.7 disabled
PNP: 002e.8 disabled
PNP: 002e.9 disabled
PNP: 002e.a disabled
PNP: 002e.b enabled
smbus: PCI: 01:04.3[0]->I2C: 01:50 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:51 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:52 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:53 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:54 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:55 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:56 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:57 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:2d enabled
smbus: PCI: 01:04.3[0]->I2C: 01:2a enabled
smbus: PCI: 01:04.3[0]->I2C: 01:49 enabled
smbus: PCI: 01:04.3[0]->I2C: 01:4a enabled
PCI: pci_scan_bus returning with max=04
PCI: pci_scan_bus returning with max=04
done
Allocating resources...
Reading resources...
PCI: 01:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 2 io
PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 2 prefmem
PCI: 01:03.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 4 prefmem
Done reading resources.
Setting resources...
PCI: 00:18.0 1ba <- [0x00fd300000 - 0x00fd2fffff] prefmem <node 0 link 2>
PCI: 00:18.0 1c2 <- [0x0000001000 - 0x0000002fff] io <node 0 link 2>
PCI: 00:18.0 1b2 <- [0x00fc000000 - 0x00fd2fffff] mem <node 0 link 2>
PCI: 01:01.0 20 <- [0x00fd100000 - 0x00fd1fffff] bus 2 mem
PCI: 02:09.0 10 <- [0x00fd100000 - 0x00fd10ffff] mem64
PCI: 02:09.0 18 <- [0x00fd110000 - 0x00fd11ffff] mem64
PCI: 02:09.1 10 <- [0x00fd120000 - 0x00fd12ffff] mem64
PCI: 02:09.1 18 <- [0x00fd130000 - 0x00fd13ffff] mem64
PCI: 01:01.1 10 <- [0x00fd200000 - 0x00fd200fff] mem64
PCI: 01:02.1 10 <- [0x00fd201000 - 0x00fd201fff] mem64
PCI: 01:03.0 1c <- [0x0000001000 - 0x0000001fff] bus 4 io
PCI: 01:03.0 20 <- [0x00fc000000 - 0x00fd0fffff] bus 4 mem
PCI: 04:00.0 10 <- [0x00fd000000 - 0x00fd000fff] mem
PCI: 04:00.1 10 <- [0x00fd001000 - 0x00fd001fff] mem
PCI: 04:05.0 10 <- [0x0000001410 - 0x0000001417] io
PCI: 04:05.0 14 <- [0x0000001430 - 0x0000001433] io
PCI: 04:05.0 18 <- [0x0000001420 - 0x0000001427] io
PCI: 04:05.0 1c <- [0x0000001440 - 0x0000001443] io
PCI: 04:05.0 20 <- [0x0000001400 - 0x000000140f] io
PCI: 04:05.0 24 <- [0x00fd003000 - 0x00fd0033ff] mem
PCI: 04:06.0 10 <- [0x00fc000000 - 0x00fcffffff] mem
PCI: 04:06.0 14 <- [0x0000001000 - 0x00000010ff] io
PCI: 04:06.0 18 <- [0x00fd002000 - 0x00fd002fff] mem
PCI: 04:06.0 30 <- [0x00fff80000 - 0x00fff9ffff] romem
PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io
PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq
PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq
PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io
PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq
PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io
PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io
PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq
PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] irq
PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] io
PNP: 002e.b 70 <- [0x0000000005 - 0x0000000005] irq
PCI: 01:04.1 20 <- [0x0000002420 - 0x000000242f] io
PCI: 01:04.2 10 <- [0x0000002400 - 0x000000241f] io
PCI: 01:04.3 58 <- [0x0000002000 - 0x00000020ff] io
PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart>
PCI: 00:19.3 94 <- [0x00f8000000 - 0x00fbffffff] mem <gart>
Done setting resources.
Done allocating resources.
Enabling resourcess...
PCI: 00:18.0 cmd <- 140
PCI: 01:01.0 bridge ctrl <- 0003
PCI: 01:01.0 cmd <- 146
PCI: 02:09.0 subsystem <- 10f1/2881
PCI: 02:09.0 cmd <- 142
PCI: 02:09.1 subsystem <- 10f1/2881
PCI: 02:09.1 cmd <- 142
PCI: 01:01.1 subsystem <- 10f1/2881
PCI: 01:01.1 cmd <- 146
PCI: 01:02.1 subsystem <- 10f1/2881
PCI: 01:02.1 cmd <- 146
PCI: 01:03.0 bridge ctrl <- 0003
PCI: 01:03.0 cmd <- 147
PCI: 04:00.0 subsystem <- 10f1/2881
PCI: 04:00.0 cmd <- 142
PCI: 04:00.1 subsystem <- 10f1/2881
PCI: 04:00.1 cmd <- 142
PCI: 04:05.0 subsystem <- 10f1/2881
PCI: 04:05.0 cmd <- 143
PCI: 04:06.0 subsystem <- 10f1/2881
PCI: 04:06.0 cmd <- 1c3
PCI: 01:04.0 subsystem <- 10f1/2881
PCI: 01:04.0 cmd <- 14f
w83627hf hwm smbus enabled
PCI: 01:04.1 subsystem <- 10f1/2881
PCI: 01:04.1 cmd <- 141
PCI: 01:04.2 subsystem <- 10f1/2881
PCI: 01:04.2 cmd <- 141
PCI: 01:04.3 subsystem <- 10f1/2881
PCI: 01:04.3 cmd <- 141
PCI: 00:18.1 subsystem <- 10f1/2881
PCI: 00:18.1 cmd <- 140
PCI: 00:18.2 subsystem <- 10f1/2881
PCI: 00:18.2 cmd <- 140
PCI: 00:18.3 cmd <- 140
PCI: 00:19.0 cmd <- 140
PCI: 00:19.1 cmd <- 140
PCI: 00:19.2 cmd <- 140
PCI: 00:19.3 cmd <- 140
done.
Initializing devices...
Root Device init
APIC_CLUSTER: 0 init
Initializing CPU #0
CPU: vendor AMD device 20f12
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

microcode: equivalent processor rev id  = 0x0210, patch id = 0x00000000
microcode: patch id that want to apply= 0x0000004d
microcode: updated to patch id = 0x0000004d  success
Setting up local apic... apic_id: 0 done.
Clearing memory 1024K - 2097152K: ------------------------------- done
CPU #0 Initialized
start_eip=0x00010000
Initializing CPU #1
CPU: vendor AMD device 20f12
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

microcode: equivalent processor rev id  = 0x0210, patch id = 0x00000000
microcode: patch id that want to apply= 0x0000004d
microcode: updated to patch id = 0x0000004d  success
Setting up local apic... apic_id: 1 done.
CPU #1 Initialized
start_eip=0x00010000
Initializing CPU #2
CPU: vendor AMD device 20f12
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

microcode: equivalent processor rev id  = 0x0210, patch id = 0x00000000
microcode: patch id that want to apply= 0x0000004d
microcode: updated to patch id = 0x0000004d  success
Setting up local apic... apic_id: 2 done.
Clearing memory 2097152K - 5242880K: ----------------++++++++++++++++ done
CPU #2 Initialized
start_eip=0x00010000
Initializing CPU #3
Waiting for 1 CPUS to stop
CPU: vendor AMD device 20f12
Enabling cache

Setting fixed MTRRs(0-88) type: UC
Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM
Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM
DONE fixed MTRRs
Setting variable MTRR 0, base:    0MB, range: 4096MB, type WB
Setting variable MTRR 1, base: 4096MB, range: 1024MB, type WB
Setting variable MTRR 2, base: 3072MB, range: 1024MB, type UC
DONE variable MTRRs
Clear out the extra MTRR's

MTRR check
Fixed MTRRs   : Enabled
Variable MTRRs: Enabled

microcode: equivalent processor rev id  = 0x0210, patch id = 0x00000000
microcode: patch id that want to apply= 0x0000004d
microcode: updated to patch id = 0x0000004d  success
Setting up local apic... apic_id: 3 done.
CPU #3 Initialized
All AP CPUs stopped
PCI: 00:18.0 init
PCI: 01:01.0 init
PCI: 02:09.0 init
PCI: 02:09.1 init
PCI: 01:03.0 init
PCI: 04:05.0 init
PCI: 04:06.0 init
PCI: 01:04.0 init
RTC Init
Invalid CMOS LB checksum
enabling HPET @0xfed00000
PNP: 002e.0 init
PNP: 002e.2 init
PNP: 002e.5 init
PNP: 002e.b init
PCI: 01:04.1 init
IDE1 IDE0 PCI: 01:04.3 init
set power on after power fail
smbus: PCI: 01:04.3[0]->I2C: 01:2d init
PCI: 00:18.1 init
PCI: 00:18.2 init
PCI: 00:18.3 init
NB: Function 3 Misc Control.. done.
PCI: 00:19.0 init
PCI: 00:19.1 init
PCI: 00:19.2 init
PCI: 00:19.3 init
NB: Function 3 Misc Control.. done.
Devices initialized
Writing IRQ routing tables to 0xf0000...done.
Wrote the mp table end at: 00000020 - 000001f4
Moving GDT to 0x500...ok
Wrote linuxbios table at: 00000530 - 00000e1c  checksum 2ea0

Welcome to elfboot, the open sourced starter.
January 2002, Eric Biederman.
Version 1.3

    33:stream_init() - rom_stream: 0xfffc0000 - 0xfffdffff
Found ELF candiate at offset 0
Loading Etherboot version: 5.4.1
Dropping non PT_LOAD segment
New segment addr 0x10000 size 0x49100 offset 0x0 filesize 0x9ac0
(cleaned up) New segment addr 0x10000 size 0x49100 offset 0x0 filesize 0x9ac0
Loading Segment: addr: 0x00000000bff8c000 memsz: 0x0000000000034000 filesz: 0x0000000000009ac0
Clearing Segment: addr: 0x00000000bff95ac0 memsz: 0x000000000002a540
Loading Segment: addr: 0x0000000000044000 memsz: 0x0000000000015100 filesz: 0x0000000000000000
Clearing Segment: addr: 0x0000000000044000 memsz: 0x0000000000015100
Jumping to boot code at 0x100b0
CPU 2063 Mhz
Etherboot 5.4.1 (GPL) http://etherboot.org
Drivers: TG3 FILO   Images: NBI ELF   
Protocols: DHCP TFTP 
Relocating _text from: [000101b0,00059100) to [bfeb70b0,bff00000)
Boot from (N)etwork (D)isk or (Q)uit? D

Probing pci disk...
[FILO]FILO version 0.4.1 (root@countzero.vandewege.net) Thu Dec 15 18:44:50 EST 2005
Press <Enter> for default boot, or <Esc> for boot prompt... 2 1 
boot: hde1:/vmlinuz-2.6.12-9-amd64-generic initrd=/initrd.img-2.6.12-9-amd64-generic ro root=/dev/md3 console=tty0 console=ttyS0,115200n8
hde: LBA48: WDC WD740GD-00FLC0                      
hdf: LBA48: WDC WD740GD-00FLC0                      
Mounted ext2fs
Found Linux version 2.6.12-9-amd64-generic (buildd@king) #1 Mon Oct 10 13:27:39 BST 2005 bzImage.
Loading kernel... ok
Loading initrd... ok
Jumping to entry point...
[    0.000000] Bootdata ok (command line is ro root=/dev/md3 console=tty0 console=ttyS0,115200n8)
[    0.000000] Linux version 2.6.12-9-amd64-generic (buildd@king) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8)) #1 Mon Oct 10 13:27:39 BST 2005
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 0000000000000e7c type 16
[    0.000000]  BIOS-e820: 0000000000000e7c - 00000000000a0000 (usable)
[    0.000000]  BIOS-e820: 00000000000f0000 - 00000000000f0400 type 16
[    0.000000]  BIOS-e820: 0000000000100000 - 00000000c0000000 (usable)
[    0.000000]  BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[    0.000000] ACPI: Unable to locate RSDP
[    0.000000] Intel MultiProcessor Specification v1.4
[    0.000000]     Virtual Wire compatibility mode.
[    0.000000] OEM ID: TYAN     <6>Product ID: S2881        <6>APIC at: 0xFEE00000
[    0.000000] Processor #0 15:1 APIC version 16
[    0.000000] Processor #1 15:1 APIC version 16
[    0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[    0.000000] Processor #2 15:1 APIC version 16
[    0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[    0.000000] Processor #3 15:1 APIC version 16
[    0.000000] WARNING: NR_CPUS limit of 1 reached. Processor ignored.
[    0.000000] I/O APIC #4 Version 17 at 0xFEC00000.
[    0.000000] I/O APIC #5 Version 17 at 0xFD200000.
[    0.000000] I/O APIC #6 Version 17 at 0xFD201000.
[    0.000000] Setting APIC routing to flat
[    0.000000] Processors: 1
[    0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:40000000)
[    0.000000] Checking aperture...
[    0.000000] CPU 0: aperture @ f8000000 size 64 MB
[    0.000000] CPU 1: aperture @ f8000000 size 64 MB
[    0.000000] Built 1 zonelists
[    0.000000] Kernel command line: ro root=/dev/md3 console=tty0 console=ttyS0,115200n8
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[    0.000000] time.c: Using 1.193182 MHz PIT timer.
[    0.000000] time.c: Detected 1992.086 MHz processor.
[   13.476890] time.c: Using PIT/TSC based timekeeping.
[   13.477331] Console: colour dummy device 80x25
[   13.697387] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[   13.712991] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[   13.789909] Memory: 4101416k/5242880k available (1620k kernel code, 92332k reserved, 997k data, 136k init)
[   13.819815] Security Framework v1.0.0 initialized
[   13.824992] SELinux:  Disabled at boot.
[   13.829226] Mount-cache hash table entries: 256
[   13.834275] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[   13.842538] CPU: L2 Cache: 1024K (64 bytes/line)
[   13.847866] CPU:  stepping 02
[   13.851414] checking if image is initramfs... it is
[   14.188550] Using IO-APIC 4
[   14.191771] Using IO-APIC 5
[   14.194987] Using IO-APIC 6
[   14.208302] Using local APIC timer interrupts.
[   14.263629] Detected 12.450 MHz APIC timer.
[   14.268446] testing NMI watchdog ... OK.
[   14.282975] NET: Registered protocol family 16
[   14.288476] PCI: Using configuration type 1
[   14.293313] mtrr: v2.0 (20020519)
[   14.297419] ACPI: Subsystem revision 20050729
[   14.302456] ACPI: Interpreter disabled.
[   14.306890] Linux Plug and Play Support v0.97 (c) Adam Belay
[   14.313412] pnp: PnP ACPI: disabled
[   14.317485] usbcore: registered new driver usbfs
[   14.322838] usbcore: registered new driver hub
[   14.328010] PCI: Probing PCI hardware
[   14.332261] PCI: Probing PCI hardware (bus 00)
[   14.338761] PCI: Discovered primary peer bus 01 [IRQ]
[   14.344593] PCI: Using IRQ router default [1022/7468] at 0000:01:04.0
[   14.352035] PCI->APIC IRQ transform: 0000:01:04.2[D] -> IRQ 19
[   14.358802] PCI->APIC IRQ transform: 0000:02:09.0[A] -> IRQ 24
[   14.365533] PCI->APIC IRQ transform: 0000:02:09.1[B] -> IRQ 25
[   14.372248] PCI->APIC IRQ transform: 0000:04:00.0[D] -> IRQ 19
[   14.379040] PCI->APIC IRQ transform: 0000:04:00.1[D] -> IRQ 19
[   14.385808] PCI->APIC IRQ transform: 0000:04:05.0[A] -> IRQ 17
[   14.392539] PCI->APIC IRQ transform: 0000:04:06.0[A] -> IRQ 18
[   14.399347] PCI-DMA: Disabling AGP.
[   14.403460] PCI-DMA: aperture base @ f8000000 size 65536 KB
[   14.409947] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[   14.417699] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[   14.426219] audit: initializing netlink socket (disabled)
[   14.432466] audit: initialized
[   14.436078] VFS: Disk quotas dquot_6.5.1
[   14.440654] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   14.448113] devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
[   14.455261] devfs: boot_options: 0x0
[   14.459445] Initializing Cryptographic API
[   14.464203] PCI: MSI quirk detected. pci_msi_quirk set.
[   14.470274] PCI: MSI quirk detected. pci_msi_quirk set.
[   14.490389] Linux agpgart interface v0.101 (c) Dave Jones
[   14.496711] PNP: No PS/2 controller found. Probing ports directly.
[   14.505346] serio: i8042 AUX port at 0x60,0x64 irq 12
[   14.511273] serio: i8042 KBD port at 0x60,0x64 irq 1
[   14.516994] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[   14.526203] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   14.533322] io scheduler noop registered
[   14.537861] io scheduler anticipatory registered
[   14.543217] io scheduler deadline registered
[   14.548185] io scheduler cfq registered
[   14.552892] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   14.561690] NET: Registered protocol family 2
[   14.576640] IP: routing cache hash table of 65536 buckets, 512Kbytes
[   14.584455] TCP established hash table entries: 524288 (order: 10, 4194304 bytes)
[   14.596145] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   14.604232] TCP: Hash tables configured (established 524288 bind 65536)
[   14.611945] NET: Registered protocol family 8
[   14.616960] NET: Registered protocol family 20
[   14.622278] Freeing unused kernel memory: 136k freed
Loading, please wait...
Begin: Loading modules ...
[   14.645287] input: AT Translated Set 2 keyboard on isa0060/serio0
[   14.657083] Capability LSM initialized
[   14.669870] NET: Registered protocol family 1
[   14.686443] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[   14.693755] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[   14.707909] AMD8111: IDE controller at PCI slot 0000:01:04.1
[   14.714477] AMD8111: chipset revision 3
[   14.718933] AMD8111: not 100% native mode: will probe irqs later
[   14.725869] AMD8111: 0000:01:04.1 (rev 03) UDMA133 controller
[   14.732469]     ide0: BM-DMA at 0x2420-0x2427, BIOS settings: hda:pio, hdb:pio
[   14.740909]     ide1: BM-DMA at 0x2428-0x242f, BIOS settings: hdc:pio, hdd:pio
[   15.881489] hdd: CD-224E, ATAPI CD/DVD-ROM drive
[   15.937874] ide1 at 0x170-0x177,0x376 on irq 15
[   18.513088] hdd: ATAPI 24X CD-ROM drive, 128kB Cache
[   18.518889] Uniform CD-ROM driver Revision: 3.20
[   18.772153] tg3.c:v3.31 (June 8, 2005)
[   18.780608] eth0: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:a5:24
[   18.794116] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0] 
[   18.803789] eth0: dma_rwctrl[769f4000]
[   18.818576] eth1: Tigon3 [partno(BCM95704A6) rev 2003 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:e0:81:30:a5:25
[   18.832075] eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
[   18.841730] eth1: dma_rwctrl[769f4000]
[   18.854427] ohci_hcd 0000:04:00.0: Advanced Micro Devices [AMD] AMD-8111 USB
[   18.862741] ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
[   18.871275] ohci_hcd 0000:04:00.0: irq 19, io mem 0xfd000000
[   18.930659] hub 1-0:1.0: USB hub found
[   18.935018] hub 1-0:1.0: 3 ports detected
[   18.942617] ohci_hcd 0000:04:00.1: Advanced Micro Devices [AMD] AMD-8111 USB (#2)
[   18.951303] ohci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 2
[   18.959848] ohci_hcd 0000:04:00.1: irq 19, io mem 0xfd001000
[   19.018622] hub 2-0:1.0: USB hub found
[   19.022997] hub 2-0:1.0: 3 ports detected
[   19.040635] SCSI subsystem initialized
[   19.047043] ata1: SATA max UDMA/100 cmd 0xFFFFC20000014080 ctl 0xFFFFC2000001408A bmdma 0xFFFFC20000014000 irq 17
[   19.058983] ata2: SATA max UDMA/100 cmd 0xFFFFC200000140C0 ctl 0xFFFFC200000140CA bmdma 0xFFFFC20000014008 irq 17
[   19.070913] ata3: SATA max UDMA/100 cmd 0xFFFFC20000014280 ctl 0xFFFFC2000001428A bmdma 0xFFFFC20000014200 irq 17
[   19.082807] ata4: SATA max UDMA/100 cmd 0xFFFFC200000142C0 ctl 0xFFFFC200000142CA bmdma 0xFFFFC20000014208 irq 17
[   19.449906] ata1: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
[   19.458221] ata1: dev 0 configured for UDMA/100
[   19.463445] scsi0 : sata_sil
[   19.821814] ata2: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
[   19.830068] ata2: dev 0 configured for UDMA/100
[   19.835281] scsi1 : sata_sil
[   20.193734] ata3: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
[   20.202017] ata3: dev 0 configured for UDMA/100
[   20.207255] scsi2 : sata_sil
[   20.565656] ata4: dev 0 ATA, max UDMA/133, 145226112 sectors: lba48
[   20.573948] ata4: dev 0 configured for UDMA/100
[   20.579205] scsi3 : sata_sil
[   20.582618]   Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
[   20.589939]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   20.598797]   Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
[   20.606107]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   20.614984]   Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
[   20.622302]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   20.631150]   Vendor: ATA       Model: WDC WD740GD-00FL  Rev: 33.0
[   20.638484]   Type:   Direct-Access                      ANSI SCSI revision: 05
[   22.664450] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[   22.672077] SCSI device sda: drive cache: write back
[   22.677847] SCSI device sda: 145226112 512-byte hdwr sectors (74356 MB)
[   22.685509] SCSI device sda: drive cache: write back
[   22.691291]  /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 p4
[   22.706480] Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
[   22.713735] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
[   22.721369] SCSI device sdb: drive cache: write back
[   22.727153] SCSI device sdb: 145226112 512-byte hdwr sectors (74356 MB)
[   22.734791] SCSI device sdb: drive cache: write back
[   22.740529]  /dev/scsi/host1/bus0/target0/lun0: p1 p2 p3 p4
[   22.758728] Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
[   22.765981] SCSI device sdc: 145226112 512-byte hdwr sectors (74356 MB)
[   22.773675] SCSI device sdc: drive cache: write back
[   22.779461] SCSI device sdc: 145226112 512-byte hdwr sectors (74356 MB)
[   22.787123] SCSI device sdc: drive cache: write back
[   22.792871]  /dev/scsi/host2/bus0/target0/lun0: p1 p2 p3 p4
[   22.812560] Attached scsi disk sdc at scsi2, channel 0, id 0, lun 0
[   22.819822] SCSI device sdd: 145226112 512-byte hdwr sectors (74356 MB)
[   22.827507] SCSI device sdd: drive cache: write back
[   22.833316] SCSI device sdd: 145226112 512-byte hdwr sectors (74356 MB)
[   22.841024] SCSI device sdd: drive cache: write back
[   22.846788]  /dev/scsi/host3/bus0/target0/lun0: p1 p2 p3 p4
[   22.867064] Attached scsi disk sdd at scsi3, channel 0, id 0, lun 0
Done.
Begin: Initializing /dev ...
Done.
Begin: Running /scripts/init-premount ...
FATAL: Error inserting fan (/lib/modules/2.6.12-9-amd64-generic/kernel/drivers/acpi/fan.ko): No such device
FATAL: Error inserting thermal (/lib/modules/2.6.12-9-amd64-generic/kernel/drivers/acpi/thermal.ko): No such device
Done.
Begin: Mounting root file system ...
Begin: Running /scripts/local-top ...
[   23.224330] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[   23.233979] md: raid1 personality registered as nr 3
[   23.249716] raid5: automatically using best checksumming function: generic_sse
[   23.262592]    generic_sse:  6044.000 MB/sec
[   23.267530] raid5: using function: generic_sse (6044.000 MB/sec)
[   23.275210] md: raid5 personality registered as nr 4
[   23.601260] devfs_mk_dev: could not append to parent for md/0
[   23.609757] md: md0 stopped.
[   23.614044] md: bind<sdb1>
[   23.617323] md: bind<sdc1>
[   23.620564] md: bind<sdd1>
[   23.623805] md: bind<sda1>
[   23.626995] raid1: raid set md0 active with 4 out of 4 mirrors
mdadm: /dev/md0 has been started with 4 drives.
[   23.641055] devfs_mk_dev: could not append to parent for md/1
[   23.649588] md: md1 stopped.
[   23.653883] md: bind<sdb2>
[   23.657143] md: bind<sdc2>
[   23.660419] md: bind<sdd2>
[   23.663659] md: bind<sda2>
[   23.666829] raid5: device sda2 operational as raid disk 0
[   23.673104] raid5: device sdd2 operational as raid disk 3
[   23.679316] raid5: device sdc2 operational as raid disk 2
[   23.685598] raid5: device sdb2 operational as raid disk 1
[   23.692275] raid5: allocated 4270kB for md1
[   23.697098] raid5: raid level 5 set md1 active with 4 out of 4 devices, algorithm 2
[   23.705958] RAID5 conf printout:
[   23.709709]  --- rd:4 wd:4 fd:0
[   23.713348]  disk 0, o:1, dev:sda2
[   23.717272]  disk 1, o:1, dev:sdb2
[   23.721214]  disk 2, o:1, dev:sdc2
[   23.725140]  disk 3, o:1, dev:sdd2
mdadm: /dev/md1 has been started with 4 drives.
[   23.740660] devfs_mk_dev: could not append to parent for md/2
[   23.749195] md: md2 stopped.
[   23.753499] md: bind<sdb3>
[   23.756782] md: bind<sdc3>
[   23.760050] md: bind<sdd3>
[   23.763323] md: bind<sda3>
[   23.766489] raid5: device sda3 operational as raid disk 0
[   23.772723] raid5: device sdd3 operational as raid disk 3
[   23.778971] raid5: device sdc3 operational as raid disk 2
[   23.785209] raid5: device sdb3 operational as raid disk 1
[   23.791895] raid5: allocated 4270kB for md2
[   23.796733] raid5: raid level 5 set md2 active with 4 out of 4 devices, algorithm 2
[   23.805597] RAID5 conf printout:
[   23.809358]  --- rd:4 wd:4 fd:0
[   23.812987]  disk 0, o:1, dev:sda3
[   23.816945]  disk 1, o:1, dev:sdb3
[   23.820871]  disk 2, o:1, dev:sdc3
[   23.824795]  disk 3, o:1, dev:sdd3
mdadm: /dev/md2 has been started with 4 drives.
[   23.844303] devfs_mk_dev: could not append to parent for md/3
[   23.852907] md: md3 stopped.
[   23.857209] md: bind<sdb4>
[   23.860491] md: bind<sdc4>
[   23.863751] md: bind<sdd4>
[   23.867023] md: bind<sda4>
[   23.870187] md: md3: raid array is not clean -- starting background reconstruction
[   23.878970] raid5: device sda4 operational as raid disk 0
[   23.885236] raid5: device sdd4 operational as raid disk 3
[   23.891492] raid5: device sdc4 operational as raid disk 2
[   23.897764] raid5: device sdb4 operational as raid disk 1
[   23.904458] raid5: allocated 4270kB for md3
[   23.909322] raid5: raid level 5 set md3 active with 4 out of 4 devices, algorithm 2
[   23.918195] RAID5 conf printout:
[   23.921952]  --- rd:4 wd:4 fd:0
[   23.925610]  disk 0, o:1, dev:sda4
[   23.929560]  disk 1, o:1, dev:sdb4
[   23.933493]  disk 2, o:1, dev:sdc4
[   23.937443]  disk 3, o:1, dev:sdd4
[   23.941428] ....<6>md: syncing RAID array md3
[   23.946502] md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
[   23.954669] md: using maximum available idle IO bandwith (but not more than 200000 KB/sec) for reconstruction.
[   23.966246] md: using 128k window, over a total of 67657664 blocks.
mdadm: /dev/md3 has been started with 4 drives.
Done.
Begin: Running /scripts/local-premount ...
[   24.000782] Attempting manual resume
[   24.006995] swsusp: Suspend partition has wrong signature?
Done.
[   24.115879] kjournald starting.  Commit interval 5 seconds
[   24.122230] EXT3-fs: mounted filesystem with ordered data mode.
Begin: Running /scripts/local-bottom ...
Done.
Done.
Begin: Running /scripts/init-bottom ...
Done.
 * version 2.86 booting
 * Starting RAID devices...        [ ok ]
 * Starting hardware event daemon...        [ ok ]
 * Creating initial device nodes...        

LinuxBIOS-1.1.8_s2881_Fallback Thu Dec 15 18:45:48 EST 2005 starting...
(0,1) link=00
(1,0) link=00
02 nodes initialized.
 core0:  --- {  APICID = 02 NODEID = 01 COREID = 00} ---
SBLink=02
NC node|link=02