coreboot-4.0-6440-gff7e676 Thu Jul 17 12:43:07 EDT 2014 starting... BSP Family_Model: 00610f01 cpu_init_detectedx = 00000000 agesawrapper_amdinitreset() entry Fch OEM config in INIT RESET Done PCI: 00:14.4 bridge ctrl <- 0003 PCI: 00:14.4 cmd <- 00 PCI: 00:14.5 subsystem <- 1022/1410 PCI: 00:14.5 cmd <- 02 PCI: 00:14.7 subsystem <- 1022/1410 PCI: 00:14.7 cmd <- 06 PCI: 00:15.0 bridge ctrl <- 0003 PCI: 00:15.0 cmd <- 00 PCI: 00:15.1 bridge ctrl <- 0003 PCI: 00:15.1 cmd <- 07 PCI: 00:16.0 cmd <- 02 PCI: 00:16.2 cmd <- 02 PCI: 00:18.0 cmd <- 00 PCI: 00:18.1 subsystem <- 1022/1410 PCI: 00:18.1 cmd <- 00 PCI: 00:18.2 subsystem <- 1022/1410 PCI: 00:18.2 cmd <- 00 PCI: 00:18.3 subsystem <- 1022/1410 PCI: 00:18.3 cmd <- 00 PCI: 00:18.4 subsystem <- 1022/1410 PCI: 00:18.4 cmd <- 00 PCI: 00:18.5 subsystem <- 1022/1410 PCI: 00:18.5 cmd <- 00 PCI: 01:00.0 cmd <- 03 PCI: 04:00.0 cmd <- 03 done. BS: BS_DEV_ENABLE times (us): entry 250 run 39175 exit 0 Initializing devices... Root Device init Root Device init 785 usecs CPU_CLUSTER: 0 init start_eip=0x00001000, code_size=0x00000031 Initializing CPU #0 CPU: vendor AMD device 610f01 CPU: family 15, model 10, stepping 01 Using generic cpu ops (good) Model 15 Init. MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled Enabling cache Setting up local apic... apic_id: 0x10 done. siblings = 03, CPU #0 initialized CPU1: stack_base 002b2000, stack_end 002b2ff8 Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1 to 17. After apic_write. Startup point 1. Waiting for send to finish... +Sending STARTUP #2 to 17. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Initializing CPU #1 CPU: vendor AMD device 610f01 CPU: family 15, model 10, stepping 01 Using generic cpu ops (good) Model 15 Init. MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled Enabling cache Setting up local apic... apic_id: 0x11 done. siblings = 03, CPU #1 initialized CPU2: stack_base 002b1000, stack_end 002b1ff8 Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1 to 18. After apic_write. Startup point 1. Waiting for send to finish... +Sending STARTUP #2 to 18. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Initializing CPU #2 CPU: vendor AMD device 610f01 CPU: family 15, model 10, stepping 01 Using generic cpu ops (good) Model 15 Init. MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled Enabling cache Setting up local apic... apic_id: 0x12 done. siblings = 03, CPU #2 initialized CPU3: stack_base 002b0000, stack_end 002b0ff8 Asserting INIT. Waiting for send to finish... +Deasserting INIT. Waiting for send to finish... +#startup loops: 2. Sending STARTUP #1 to 19. After apic_write. Startup point 1. Waiting for send to finish... +Sending STARTUP #2 to 19. After apic_write. Startup point 1. Waiting for send to finish... +After Startup. Initializing CPU #3 Waiting for 1 CPUS to stop CPU: vendor AMD device 610f01 CPU: family 15, model 10, stepping 01 Using generic cpu ops (good) Model 15 Init. MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled Enabling cache Setting up local apic... apic_id: 0x13 done. siblings = 03, CPU #3 initialized All AP CPUs stopped (1217 loops) CPU1: stack: 002b2000 - 002b3000, lowest used address 002b2dc8, stack used: 568 bytes CPU2: stack: 002b1000 - 002b2000, lowest used address 002b1dc8, stack used: 568 bytes CPU3: stack: 002b0000 - 002b1000, lowest used address 002b0dc8, stack used: 568 bytes CPU_CLUSTER: 0 init 152840 usecs PCI: 00:00.0 init PCI: 00:00.0 init 847 usecs PCI: 00:11.0 init PCI: 00:11.0 init 830 usecs PCI: 00:12.0 init PCI: 00:12.0 init 830 usecs PCI: 00:12.2 init PCI: 00:12.2 init 826 usecs PCI: 00:13.0 init PCI: 00:13.0 init 830 usecs PCI: 00:13.2 init PCI: 00:13.2 init 830 usecs PCI: 00:14.0 init IOAPIC: Initializing IOAPIC at 0xfec00000 IOAPIC: Bootstrap Processor Local APIC = 0x10 IOAPIC: ID = 0x04 IOAPIC: Dumping registers reg 0x0000: 0x04000000 reg 0x0001: 0x00178021 reg 0x0002: 0x04000000 IOAPIC: 24 interrupts IOAPIC: Enabling interrupts on FSB IOAPIC: reg 0x00000000 value 0x10000000 0x00000700 IOAPIC: reg 0x00000001 value 0x00000000 0x00010000 IOAPIC: reg 0x00000002 value 0x00000000 0x00010000 IOAPIC: reg 0x00000003 value 0x00000000 0x00010000 IOAPIC: reg 0x00000004 value 0x00000000 0x00010000 IOAPIC: reg 0x00000005 value 0x00000000 0x00010000 IOAPIC: reg 0x00000006 value 0x00000000 0x00010000 IOAPIC: reg 0x00000007 value 0x00000000 0x00010000 IOAPIC: reg 0x00000008 value 0x00000000 0x00010000 IOAPIC: reg 0x00000009 value 0x00000000 0x00010000 IOAPIC: reg 0x0000000a value 0x00000000 0x00010000 IOAPIC: reg 0x0000000b value 0x00000000 0x00010000 IOAPIC: reg 0x0000000c value 0x00000000 0x00010000 IOAPIC: reg 0x0000000d value 0x00000000 0x00010000 IOAPIC: reg 0x0000000e value 0x00000000 0x00010000 IOAPIC: reg 0x0000000f value 0x00000000 0x00010000 IOAPIC: reg 0x00000010 value 0x00000000 0x00010000 IOAPIC: reg 0x00000011 value 0x00000000 0x00010000 IOAPIC: reg 0x00000012 value 0x00000000 0x00010000 IOAPIC: reg 0x00000013 value 0x00000000 0x00010000 IOAPIC: reg 0x00000014 value 0x00000000 0x00010000 IOAPIC: reg 0x00000015 value 0x00000000 0x00010000 IOAPIC: reg 0x00000016 value 0x00000000 0x00010000 IOAPIC: reg 0x00000017 value 0x00000000 0x00010000 PCI: 00:14.0 init 66897 usecs PCI: 00:14.2 init PCI: 00:14.2 init 829 usecs PCI: 00:14.3 init RTC Init PCI: 00:14.3 init 1293 usecs PCI: 00:14.4 init PCI: 00:14.4 init 830 usecs PCI: 00:14.5 init PCI: 00:14.5 init 826 usecs PCI: 00:14.7 init PCI: 00:14.7 init 830 usecs PCI: 00:15.0 init PCI: 00:15.0 init 830 usecs PCI: 00:15.1 init PCI: 00:15.1 init 830 usecs PCI: 00:16.0 init PCI: 00:16.0 init 830 usecs PCI: 00:16.2 init PCI: 00:16.2 init 830 usecs PCI: 00:18.0 init PCI: 00:18.0 init 826 usecs PCI: 00:18.1 init PCI: 00:18.1 init 830 usecs PCI: 00:18.2 init PCI: 00:18.2 init 830 usecs PCI: 00:18.3 init PCI: 00:18.3 init 829 usecs PCI: 00:18.4 init PCI: 00:18.4 init 826 usecs PCI: 00:18.5 init PCI: 00:18.5 init 830 usecs PCI: 01:00.0 init PCI: 01:00.0 init 830 usecs PNP: 002e.1 init PNP: 002e.1 init 786 usecs PNP: 002e.4 init ITE IT8728F Super I/O HWM: Initializing Hardware Monitor.. ITE IT8728F Super I/O HWM: Base Address at 0x295 PNP: 002e.4 init 5571 usecs PNP: 002e.5 init Keyboard init... No PS/2 keyboard detected. PNP: 002e.5 init 141927 usecs PNP: 002e.7 init PNP: 002e.7 init 786 usecs PCI: 04:00.0 init PCI: 04:00.0 init 830 usecs Devices initialized Show all devs...After init. Root Device: enabled 1 CPU_CLUSTER: 0: enabled 1 APIC: 10: enabled 1 DOMAIN: 0000: enabled 1 PCI: 00:00.0: enabled 1 PCI: 00:01.0: enabled 0 PCI: 00:01.1: enabled 0 PCI: 00:02.0: enabled 1 PCI: 00:03.0: enabled 0 PCI: 00:04.0: enabled 0 PCI: 00:05.0: enabled 0 PCI: 00:06.0: enabled 0 PCI: 00:07.0: enabled 0 PCI: 00:08.0: enabled 0 PCI: 00:10.0: enabled 0 PCI: 00:10.1: enabled 0 PCI: 00:11.0: enabled 1 PCI: 00:12.0: enabled 1 PCI: 00:12.2: enabled 1 PCI: 00:13.0: enabled 1 PCI: 00:13.2: enabled 1 PCI: 00:14.0: enabled 1 I2C: 01:50: enabled 1 I2C: 01:51: enabled 1 PCI: 00:14.1: enabled 0 PCI: 00:14.2: enabled 1 PCI: 00:14.3: enabled 1 PNP: 002e.0: enabled 0 PNP: 002e.1: enabled 1 PNP: 002e.2: enabled 0 PNP: 002e.3: enabled 0 PNP: 002e.4: enabled 1 PNP: 002e.5: enabled 1 PNP: 002e.6: enabled 0 PNP: 002e.7: enabled 1 PNP: 002e.a: enabled 0 PCI: 00:14.4: enabled 1 PCI: 00:14.5: enabled 1 PCI: 00:14.6: enabled 0 PCI: 00:14.7: enabled 1 PCI: 00:15.0: enabled 1 PCI: 00:15.1: enabled 1 PCI: 00:15.2: enabled 0 PCI: 00:15.3: enabled 0 PCI: 00:18.0: enabled 1 PCI: 00:18.1: enabled 1 PCI: 00:18.2: enabled 1 PCI: 00:18.3: enabled 1 PCI: 00:18.4: enabled 1 PCI: 00:18.5: enabled 1 APIC: 11: enabled 1 APIC: 12: enabled 1 APIC: 13: enabled 1 PCI: 00:16.0: enabled 1 PCI: 00:16.2: enabled 1 PCI: 01:00.0: enabled 1 PCI: 04:00.0: enabled 1 BS: BS_DEV_INIT times (us): entry 0 run 491437 exit 0 CBMEM region bf130000-bfffffff (cbmem_check_toc) CBMEM region bf130000-bfffffff (cbmem_initialize_empty) Adding CBMEM entry as no. 1 Moving GDT to bf130200...ok Finalize devices... Devices finalized agesawrapper_amdinitlate() entry DmiTable:0, AcpiPstatein: 10010126, AcpiSrat:0,AcpiSlit:0, Mce:100111ba, Cmc:1001127c,Alib:10011336, AcpiIvrs:0 in agesawrapper_amdinitlate agesawrapper_amdinitlate() AGESA_STATUS = 0 agesawrapper_amdS3Save() entry NvStorageSize=2c2, NvStorage=100123c3 SF: Detected W25Q64 with page size 1000, total 800000 SF: Successfully erased 4096 bytes @ 0xffff7000 VolatileStorageSize=3e26, VolatileStorage=10012685 SF: Detected W25Q64 with page size 1000, total 800000 SF: Successfully erased 24576 bytes @ 0xffff0000 SF: Detected W25Q64 with page size 1000, total 800000 SF: Successfully erased 4096 bytes @ 0xffff6000 agesawrapper_amdS3Save() AGESA_STATUS = 0 BS: BS_POST_DEVICE times (us): entry 7176 run 1747 exit 338450 BS: BS_OS_RESUME_CHECK times (us): entry 0 run 0 exit 0 Writing IRQ routing tables to 0xf0000...write_pirq_routing_table done. Adding CBMEM entry as no. 2 Writing IRQ routing tables to 0xbf130400...write_pirq_routing_table done. PIRQ table: 48 bytes. Wrote the mp table end at: 000f0410 - 000f061c Adding CBMEM entry as no. 3 Wrote the mp table end at: bf131410 - bf13161c MP table: 540 bytes. Adding CBMEM entry as no. 4 ACPI: Writing ACPI tables at bf132400... ACPI: * DSDT at bf1324c8 ACPI: * DSDT @ bf1324c8 Length 187c ACPI: * FACS at bf133d48 ACPI: * FADT at bf133d88 pm_base: 0x0800 ACPI: added table 1/32, length now 40 ACPI: * HPET at bf133e80 ACPI: added table 2/32, length now 44 ACPI: * MADT at bf133eb8 ACPI: added table 3/32, length now 48 ACPI: added table 4/32, length now 52 ACPI: * IVRS at bf134100 AGESA IVRS table NULL. Skipping. ACPI: * SRAT at bf134100 AGESA SRAT table NULL. Skipping. ACPI: * SLIT at bf134100 AGESA SLIT table NULL. Skipping. ACPI: * AGESA ALIB SSDT at bf134100 ACPI: added table 5/32, length now 56 ACPI: * SSDT at bf134620 ACPI: added table 6/32, length now 60 ACPI: * SSDT for PState at bf135360 ACPI: * SSDT ACPI: added table 7/32, length now 64 ACPI: done. ACPI tables: 12197 bytes. Adding CBMEM entry as no. 5 smbios_write_tables: bf13d800 Root Device (ASUS F2A85-M) CPU_CLUSTER: 0 (AMD FAM15 Root Complex) APIC: 10 (AMD CPU Family 15h) DOMAIN: 0000 (AMD FAM15 Root Complex) PCI: 00:00.0 (AMD FAM15 Northbridge) PCI: 00:01.0 (AMD FAM15 Northbridge) PCI: 00:01.1 (AMD FAM15 Northbridge) PCI: 00:02.0 (AMD FAM15 Northbridge) PCI: 00:03.0 (AMD FAM15 Northbridge) PCI: 00:04.0 (AMD FAM15 Northbridge) PCI: 00:05.0 (AMD FAM15 Northbridge) PCI: 00:06.0 (AMD FAM15 Northbridge) PCI: 00:07.0 (AMD FAM15 Northbridge) PCI: 00:08.0 (AMD FAM15 Northbridge) PCI: 00:10.0 (ATI HUDSON) PCI: 00:10.1 (ATI HUDSON) PCI: 00:11.0 (ATI HUDSON) PCI: 00:12.0 (ATI HUDSON) PCI: 00:12.2 (ATI HUDSON) PCI: 00:13.0 (ATI HUDSON) PCI: 00:13.2 (ATI HUDSON) PCI: 00:14.0 (ATI HUDSON) I2C: 01:50 (unknown) I2C: 01:51 (unknown) PCI: 00:14.1 (ATI HUDSON) PCI: 00:14.2 (ATI HUDSON) PCI: 00:14.3 (ATI HUDSON) PNP: 002e.0 (ITE IT8728F Super I/O) PNP: 002e.1 (ITE IT8728F Super I/O) PNP: 002e.2 (ITE IT8728F Super I/O) PNP: 002e.3 (ITE IT8728F Super I/O) PNP: 002e.4 (ITE IT8728F Super I/O) PNP: 002e.5 (ITE IT8728F Super I/O) PNP: 002e.6 (ITE IT8728F Super I/O) PNP: 002e.7 (ITE IT8728F Super I/O) PNP: 002e.a (ITE IT8728F Super I/O) PCI: 00:14.4 (ATI HUDSON) PCI: 00:14.5 (ATI HUDSON) PCI: 00:14.6 (ATI HUDSON) PCI: 00:14.7 (ATI HUDSON) PCI: 00:15.0 (ATI HUDSON) PCI: 00:15.1 (ATI HUDSON) PCI: 00:15.2 (ATI HUDSON) PCI: 00:15.3 (ATI HUDSON) PCI: 00:18.0 (AMD FAM15 Northbridge) PCI: 00:18.1 (AMD FAM15 Northbridge) PCI: 00:18.2 (AMD FAM15 Northbridge) PCI: 00:18.3 (AMD FAM15 Northbridge) PCI: 00:18.4 (AMD FAM15 Northbridge) PCI: 00:18.5 (AMD FAM15 Northbridge) APIC: 11 (unknown) APIC: 12 (unknown) APIC: 13 (unknown) PCI: 00:16.0 (unknown) PCI: 00:16.2 (unknown) PCI: 01:00.0 (unknown) PCI: 04:00.0 (unknown) SMBIOS tables: 332 bytes. Adding CBMEM entry as no. 6 Adding CBMEM entry as no. 7 Adding CBMEM entry as no. 8 Writing table forward entry at 0x00000500 Wrote coreboot table at: 00000500, 0x10 bytes, checksum 4fe0 Table forward entry ends at 0x00000528. ... aligned to 0x00001000 Writing coreboot table at 0xbffdf000 rom_table_end = 0xbffdf000 ... aligned to 0xbffe0000 0. 0000000000000000-0000000000000fff: CONFIGURATION TABLES 1. 0000000000001000-000000000009ffff: RAM 2. 00000000000c0000-00000000bf12ffff: RAM 3. 00000000bf130000-00000000bfffffff: CONFIGURATION TABLES 4. 00000000c0000000-00000000dfffffff: RESERVED 5. 00000000f8000000-00000000fbffffff: RESERVED 6. 0000000100000000-000000021effffff: RAM Wrote coreboot table at: bffdf000, 0x164 bytes, checksum 9442 coreboot table: 380 bytes. FREE SPACE 0. bffe7000 00019000 GDT 1. bf130200 00000200 IRQ TABLE 2. bf130400 00001000 SMP TABLE 3. bf131400 00001000 ACPI 4. bf132400 0000b400 SMBIOS 5. bf13d800 00000800 ACPI RESUME 6. bf13e000 00e00000 ACPISCRATCH 7. bff3e000 000a1000 COREBOOT 8. bffdf000 00008000 BS: BS_WRITE_TABLES times (us): entry 0 run 184031 exit 0 CBFS: located payload @ ffec94f8, 59956 bytes. Loading segment from rom address 0xffec94f8 code (compression=1) New segment dstaddr 0xe3180 memsize 0x1ce80 srcaddr 0xffec9530 filesize 0xe9fc (cleaned up) New segment addr 0xe3180 size 0x1ce80 offset 0xffec9530 filesize 0xe9fc Loading segment from rom address 0xffec9514 Entry Point 0x000fd412 Bounce Buffer at bee47000, 3047520 bytes Loading Segment: addr: 0x00000000000e3180 memsz: 0x000000000001ce80 filesz: 0x000000000000e9fc lb: [0x0000000000200000, 0x0000000000374030) Post relocation: addr: 0x00000000000e3180 memsz: 0x000000000001ce80 filesz: 0x000000000000e9fc using LZMA [ 0x000e3180, 00100000, 0x00100000) <- ffec9530 dest 000e3180, end 00100000, bouncebuffer bee47000 Loaded segments BS: BS_PAYLOAD_LOAD times (us): entry 0 run 45084 exit 0 Jumping to boot code at 000fd412 CPU0: stack: 002b3000 - 002b4000, lowest used address 002b3a2c, stack used: 1492 bytes entry = 0x000fd412 lb_start = 0x00200000 lb_size = 0x00174030 buffer = 0xbee47000 Start bios (version rel-1.7.4-0-g96917a8-20140717_124342-debian.local) Found mainboard ASUS F2A85-M Relocating init from 0x000e4369 to 0xbf114550 (size 47591) Found CBFS header at 0xfffffc50 CPU Mhz=3598 Found 25 PCI devices (max PCI bus is 04) Copying PIR from 0xbf130400 to 0x000f5a10 Copying MPTABLE from 0xbf131400/bf131410 to 0x000f57f0 Copying ACPI RSDP from 0xbf132400 to 0x000f57d0 Copying SMBIOS entry point from 0xbf13d800 to 0x000f57b0 Using pmtimer, ioport 0x818 Scan for VGA option rom Running option rom at c000:0003 Turning on vga text mode console SeaBIOS (version rel-1.7.4-0-g96917a8-20140717_124342-debian.local) EHCI init on dev 00:12.2 (regs=0xf2208820) EHCI init on dev 00:13.2 (regs=0xf2208920) OHCI init on dev 00:14.5 (regs=0xf2206000) EHCI init on dev 00:16.2 (regs=0xf2208b20) Found 0 lpt ports Found 1 serial ports AHCI controller at 11.0, iobase f2208000, irq 0 Searching bootorder for: /pci@i0cf8/*@11/drive@6/disk@0 AHCI/6: registering: "AHCI/6: INTEL SSDSA2CT040G3 ATA-8 Hard-Disk (38166 MiBytes)" OHCI init on dev 00:12.0 (regs=0xf2204000) OHCI init on dev 00:13.0 (regs=0xf2205000) Got ps2 nak (status=51) USB keyboard initialized WARNING - Timeout at wait_ed:434! All threads complete. Scan for option roms Running option rom at ce80:0003 pmm call arg1=1 pmm call arg1=0 pmm call arg1=1 pmm call arg1=0 Searching bootorder for: /pci@i0cf8/pci-bridge@15,1/*@0 Press F12 for boot menu. Searching bootorder for: HALT drive 0x000f5740: PCHS=16383/16/63 translation=lba LCHS=1024/255/63 s=78165360 Space available for UMB: cf800-ee800, f5240-f5740 Returned 57344 bytes of ZoneHigh e820 map has 7 items: 0: 0000000000000000 - 000000000009fc00 = 1 RAM 1: 000000000009fc00 - 00000000000a0000 = 2 RESERVED 2: 00000000000f0000 - 0000000000100000 = 2 RESERVED 3: 0000000000100000 - 00000000bf12e000 = 1 RAM 4: 00000000bf12e000 - 00000000e0000000 = 2 RESERVED 5: 00000000f8000000 - 00000000fc000000 = 2 RESERVED 6: 0000000100000000 - 000000021f000000 = 1 RAM enter handle_19: NULL Booting from Hard Disk... Booting from 0000:7c00