Greg,
Could you point me to the right "Wiki" page, so I can provide what you are referring to. 
I am thinking machine and motherboard specs, but I want to make sure I am looking at the same page you are.
Thanks

On Mon, Jul 5, 2010 at 5:51 PM, Gregg Levine <gregg.drwho8@gmail.com> wrote:
On Mon, Jul 5, 2010 at 5:02 PM, Daniel J. Celta <dcelta@gmail.com> wrote:
> Has anyone updated this Supermicro server Board BIOS for the H8DME-2......
>
> I have installed FC10, (i was able to complete this installation by turning
> of the RAID configuration in the BIOS), and now I am having trouble when
> trying to upgrade the Operating system to FC13.
>
>
> I suspect, if I update the BIOS, I currently have the version of the BIOS
> that came pre-installed with the server, I may be able to upgrade to FC13.
>
> One thing I like to mention, when running "make menuconfig" I was not sure
> of the ROM Chip size, and used the largest available setting 4MB.
>
> - How can I check the proper setting for this parameter????
>
>
>
> So now, I have created the coreboot.rom, and think I am ready to run
> "flashrom".......
>
> - Is there anything else I need to check before I pull the trigger???
>
> - Has anyone had any problems I should be aware of????
>
>
> Thanks
>
> Daniel
>
> --
> coreboot mailing list: coreboot@coreboot.org
> http://www.coreboot.org/mailman/listinfo/coreboot
>

Hello!
I confess I'm not familiar with that board. Why don't you post the
exact same things that the Wiki asks for? That way the rest of us,
even those of us who do know it, can advise you? I do however believe
you're on the right path.


-----
Gregg C Levine gregg.drwho8@gmail.com
"This signature fought the Time Wars, time and again."