LinuxBIOS-2.0.0.0Fallback Sun Jul 1 06:27:14 IDT 2007 starting... Setting up default parameters for memory Sizing memory Probing for DIMM0 Found DIMM0 Page Size: 00001000 Component Banks: 4 Module Banks: 2 DIMM size: 08000000 Probing for DIMM1 MC_BANK_CFG = 00705520 Copying LinuxBIOS to RAM. Jumping to LinuxBIOS. LinuxBIOS-2.0.0.0Fallback Sun Jul 1 06:27:14 IDT 2007 booting... end 4b7fc3fe, start 0 32-bit delta 449 calibrate_tsc 32-bit result is 449 clocks_per_usec: 449 Enumerating buses... scan_static_bus for Root Device northbridge.c:enable_dev() DEVICE_PATH_PCI_DOMAIN Finding PCI configuration type. PCI: Using configuration type 1 PCI_DOMAIN: 0000 enabled PCI_DOMAIN: 0000 scanning... PCI: pci_scan_bus for bus 00 northbridge.c:enable_dev() device path type 2 PCI: 00:00.0 [1078/0001] ops PCI: 00:00.0 [1078/0001] enabled PCI: devfn 0x8, bad id 0xffffffff PCI: devfn 0x10, bad id 0xffffffff PCI: devfn 0x18, bad id 0xffffffff PCI: devfn 0x20, bad id 0xffffffff PCI: devfn 0x28, bad id 0xffffffff PCI: devfn 0x30, bad id 0xffffffff PCI: devfn 0x38, bad id 0xffffffff PCI: devfn 0x40, bad id 0xffffffff PCI: devfn 0x48, bad id 0xffffffff PCI: devfn 0x50, bad id 0xffffffff PCI: devfn 0x58, bad id 0xffffffff malloc Enter, size 668, free_mem_ptr 00016000 malloc 0x00016000 PCI: 00:0c.0 [10ec/8139] enabled PCI: devfn 0x68, bad id 0xffffffff PCI: devfn 0x70, bad id 0xffffffff PCI: devfn 0x79, bad id 0xffffffff PCI: devfn 0x7a, bad id 0xffffffff PCI: devfn 0x7b, bad id 0xffffffff PCI: devfn 0x7c, bad id 0xffffffff PCI: devfn 0x7d, bad id 0xffffffff PCI: devfn 0x7e, bad id 0xffffffff PCI: devfn 0x7f, bad id 0xffffffff PCI: devfn 0x80, bad id 0xffffffff PCI: devfn 0x88, bad id 0xffffffff PCI: 00:12.0 [1078/0100] bus ops southbridge_enable: dev is 0000e040 PCI: 00:12.0 [1078/0100] enabled PCI: 00:12.1 [1078/0101] disabled PCI: 00:12.2 [1078/0102] ops cs5530_ide: ide_enable PCI: 00:12.2 [1078/0102] enabled PCI: 00:12.3 [1078/0103] enabled PCI: 00:12.4 [1078/0104] enabled PCI: devfn 0x95, bad id 0xffffffff PCI: devfn 0x96, bad id 0xffffffff PCI: devfn 0x97, bad id 0xffffffff PCI: 00:13.0 [0e11/a0f8] enabled PCI: devfn 0xa0, bad id 0xffffffff PCI: devfn 0xa8, bad id 0xffffffff PCI: devfn 0xb0, bad id 0xffffffff PCI: devfn 0xb8, bad id 0xffffffff PCI: devfn 0xc0, bad id 0xffffffff PCI: devfn 0xc8, bad id 0xffffffff PCI: devfn 0xd0, bad id 0xffffffff PCI: devfn 0xd8, bad id 0xffffffff PCI: devfn 0xe0, bad id 0xffffffff PCI: devfn 0xe8, bad id 0xffffffff PCI: devfn 0xf0, bad id 0xffffffff PCI: devfn 0xf8, bad id 0xffffffff scan_static_bus for PCI: 00:12.0 malloc Enter, size 668, free_mem_ptr 0001629c malloc 0x0001629c malloc Enter, size 668, free_mem_ptr 00016538 malloc 0x00016538 malloc Enter, size 668, free_mem_ptr 000167d4 malloc 0x000167d4 malloc Enter, size 668, free_mem_ptr 00016a70 malloc 0x00016a70 malloc Enter, size 668, free_mem_ptr 00016d0c malloc 0x00016d0c malloc Enter, size 668, free_mem_ptr 00016fa8 malloc 0x00016fa8 malloc Enter, size 668, free_mem_ptr 00017244 malloc 0x00017244 malloc Enter, size 668, free_mem_ptr 000174e0 malloc 0x000174e0 PNP: 002e.4 enabled PNP: 002e.a enabled PNP: 002e.e enabled PNP: 002e.f disabled PNP: 002e.10 enabled PNP: 002e.12 enabled PNP: 002e.0 enabled PNP: 002e.1 enabled PNP: 002e.2 enabled PNP: 002e.3 enabled PNP: 002e.5 enabled PNP: 002e.6 enabled PNP: 002e.7 enabled PNP: 002e.8 enabled scan_static_bus for PCI: 00:12.0 done PCI: pci_scan_bus returning with max=000 scan_static_bus for Root Device done done Allocating resources... Reading resources... Root Device compute_allocate_io: base: 00000400 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 northbridge.c:pci_domain_read_resources() PCI_DOMAIN: 0000 read_resources bus 0 link: 0 PCI_DOMAIN: 0000 read_resources bus 0 link: 0 done Root Device read_resources bus 0 link: 0 done PCI: 00:0c.0 10 * [0x00000400 - 0x000004ff] io PCI: 00:12.2 20 * [0x00000800 - 0x0000087f] io Root Device compute_allocate_io: base: 00000880 size: 00000480 align: 8 gran: 0 done Root Device compute_allocate_mem: base: 00000000 size: 00000000 align: 0 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:12.4 10 * [0x00000000 - 0x00000fff] mem PCI: 00:13.0 10 * [0x00001000 - 0x00001fff] mem PCI: 00:0c.0 14 * [0x00002000 - 0x000020ff] mem PCI: 00:12.3 10 * [0x00003000 - 0x0000307f] mem Root Device compute_allocate_mem: base: 00003080 size: 00003080 align: 12 gran: 0 done Done reading resources. Setting resources... Root Device compute_allocate_io: base: 00001000 size: 00000480 align: 8 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:0c.0 10 * [0x00001000 - 0x000010ff] io PCI: 00:12.2 20 * [0x00001400 - 0x0000147f] io Root Device compute_allocate_io: base: 00001480 size: 00000480 align: 8 gran: 0 done Root Device compute_allocate_mem: base: febfc000 size: 00003080 align: 12 gran: 0 Root Device read_resources bus 0 link: 0 Root Device read_resources bus 0 link: 0 done PCI: 00:12.4 10 * [0xfebfc000 - 0xfebfcfff] mem PCI: 00:13.0 10 * [0xfebfd000 - 0xfebfdfff] mem PCI: 00:0c.0 14 * [0xfebfe000 - 0xfebfe0ff] mem PCI: 00:12.3 10 * [0xfebff000 - 0xfebff07f] mem Root Device compute_allocate_mem: base: febff080 size: 00003080 align: 12 gran: 0 done Root Device assign_resources, bus 0 link: 0 BC_DRAM_TOP = 0x07bfffff MC_GBASE_ADD = 0x000000f8 I would set ram size to 124 Mbytes PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 PCI: 00:0c.0 10 <- [0x0000001000 - 0x00000010ff] io PCI: 00:0c.0 14 <- [0x00febfe000 - 0x00febfe0ff] mem PCI: 00:12.2 20 <- [0x0000001400 - 0x000000147f] io PCI: 00:12.3 10 <- [0x00febff000 - 0x00febff07f] mem PCI: 00:12.4 10 <- [0x00febfc000 - 0x00febfcfff] mem PCI: 00:13.0 10 <- [0x00febfd000 - 0x00febfdfff] mem PCI_DOMAIN: 0000 assign_resources, bus 0 link: 0 Root Device assign_resources, bus 0 link: 0 Done setting resources. Done allocating resources. Enabling resources... PCI: 00:00.0 cmd <- 147 PCI: 00:0c.0 cmd <- 143 cs5530.c: cs5530_pci_dev_enable_resources() PCI: 00:12.0 cmd <- 14f PNP: 002e.a missing enable_resources PNP: 002e.e missing enable_resources PNP: 002e.10 missing enable_resources PNP: 002e.12 missing enable_resources PCI: 00:12.2 cmd <- 141 PCI: 00:12.3 subsystem <- 00/00 PCI: 00:12.3 cmd <- 142 PCI: 00:12.4 subsystem <- 00/00 PCI: 00:12.4 cmd <- 142 PCI: 00:13.0 subsystem <- 00/00 PCI: 00:13.0 cmd <- 142 done. Initializing devices... Root Device init PCI: 00:00.0 init northbridge: northbridge_init() Calling enable_cache() PCI: 00:12.0 init cs5530: southbridge_init PNP: 002e.4 init PCI: 00:12.2 init cs5530_ide: ide_init PCI: 00:12.3 init PCI: 00:12.4 init PCI: 00:13.0 init PCI: 00:0c.0 init PNP: 002e.0 init PNP: 002e.1 init PNP: 002e.2 init PNP: 002e.3 init PNP: 002e.5 init PNP: 002e.6 init PNP: 002e.7 init PNP: 002e.8 init Devices initialized Copying IRQ routing tables to 0xf0000...done. Verifing copy of IRQ routing tables at 0xf0000...done Checking IRQ routing table consistency... check_pirq_routing_table() - irq_routing_table located at: 0x000f0000 /home/eyal/LinuxBIOSv2/src/arch/i386/boot/pirq_routing.c: 36:check_pirq_routi ng_table() - checksum is: 0x2d but should be: 0x63 done. Moving GDT to 0x500...ok Adjust low_table_end from 0x00000530 to 0x00001000 Adjust rom_table_end from 0x000f0400 to 0x00100000 Wrote linuxbios table at: 00000530 - 000006b4 checksum 18c4 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffe0000 - 0xfffeffff Found ELF candidate at offset 0 header_offset is 0 Try to load at offset 0x0 malloc Enter, size 32, free_mem_ptr 0001777c malloc 0x0001777c New segment addr 0x100000 size 0x20e80 offset 0xc0 filesize 0x6ec8 (cleaned up) New segment addr 0x100000 size 0x20e80 offset 0xc0 filesize 0x6ec8 lb: [0x0000000000004000, 0x000000000001a000) malloc Enter, size 32, free_mem_ptr 0001779c malloc 0x0001779c New segment addr 0x120e80 size 0x48 offset 0x6fa0 filesize 0x48 (cleaned up) New segment addr 0x120e80 size 0x48 offset 0x6fa0 filesize 0x48 lb: [0x0000000000004000, 0x000000000001a000) Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x0000000000020e80 filesz: 0x00 00000000006ec8 [ 0x0000000000100000, 0000000000106ec8, 0x0000000000120e80) <- 00000000000000c0 Clearing Segment: addr: 0x0000000000106ec8 memsz: 0x0000000000019fb8 Loading Segment: addr: 0x0000000000120e80 memsz: 0x0000000000000048 filesz: 0x00 00000000000048 [ 0x0000000000120e80, 0000000000120ec8, 0x0000000000120ec8) <- 0000000000006fa0 Loaded segments verified segments closed down stream Jumping to boot code at 0x10513c entry = 0x0010513c lb_start = 0x00004000 lb_size = 0x00016000 adjust = 0x07be6000 buffer = 0x07bd4000 elf_boot_notes = 0x00010280 adjusted_boot_notes = 0x07bf6280 FILO version 0.4.2 (eyal@mainmachine) Sun Jul 1 06:26:04 IDT 2007 Press for default boot, or for boot prompt... timed out boot: hda1:/vmlinuz root=/dev/hda1 console=tty0 console=ttyS0,115200 hda: LBA 40GB: ST340810A Mounted ext2fs Found Linux version 2.6.21.5 (eyal@mainmachine) #5 PREEMPT Thu Jul 5 11:50:44 ID T 2007 bzImage. Loading kernel... ok Jumping to entry point...