Hello,Hi,
sb_Poweron_Init is called in platform_BeforeInitReset in agesa family 14 state machine. Also by looking at latest board status, the SATA was working:
I've built coreboot for a asrock e350m1 mainboard before the weekend and with the current version SATA disks were not detected. Neither by SeaBIOS nor in a current Linux system booted from USB.
As previos versions worked just fine i narrowed it down to the commit 94c47c0 [https://review.coreboot.org/c/coreboot/+/37703], it's the first commit that shows this problem.
It seems to me that the rrot cause is that since this commit
sb_Poweron_Init() for the sb800 isn't called anywhere, but I'm not sure about the right way to include it.
Could anyone help with that?
AHCI/0: Set transfer mode to UDMA-6
Searching bios-geometry for: /pci@i0cf8/*@11/drive@0/disk@0
AHCI/0: registering: "AHCI/0: SanDisk SDSSDP064G ATA-9 Hard-Disk (61057 MiBytes)"
Don't know exactly what could cause it. I would try to build with
the same config and repo revision as in the board status.
Thanks,Regards,
Valentin
-- Michał Żygowski Firmware Engineer http://3mdeb.com | @3mdeb_com
_______________________________________________
coreboot mailing list -- coreboot@coreboot.org
To unsubscribe send an email to coreboot-leave@coreboot.org