I
am trying to build and run a romimage for tyan s2850:
Hardware:
No
disks
Superio
: w83627hf
Ethernet:
broadcom
It
looks like the default mainboard configuration.
In
order to start I wanted to build only the normal image. Only to see some output
in the console.
I
made the following changes in Config.lb:
* put the romimage "fallback"
statement in comment.
* FALLBACK_SIZE =0.
* HAVE_FALLBACK_BOOT = 0
* remove "fallback from build: buildrom ./linuxbios.rom ROM_SIZE "normal"
* Use filo boot.
I
built the romimage, burn it and the console doesn't show output.
The
problem is not in the cable.
What
am I doing wrong ?
Thanks,
Sagiv