LinuxBIOS-1.0.0 Thu Jan 16 15:07:47 CST 2003 booting... Initializing CPU #0 Initializing CPU #1 CPU 1/6 did not initialize! CPU 3/7 did not initialize! 64:rom_read_bytes() - overflowed source buffer. max_block = 0 ROM segment 0x0800 length 0xfbf8 reloc 0x9400 Etherboot 5.0.8 (GPL) Tagged ELF (Multiboot) for [EEPRO100] Boot from (N)etwork or from (L)ocal? Probing...[EEPRO100]Found Intel EtherExpressPro100 ROM address 0x0000 The PCI BIOS has not enabled this device! Updating PCI command 0003->0007. pci_bus 04 pci_device_fn 08 EEPro100 ethernet addr: 00:E0:81:24:21:B3 Searching for server (DHCP)... clocks_per_tick = 1260877 .AWAIT_BOOTP .AWAIT_BOOTP Me: 192.168.181.2, Server: 192.168.181.1, Gateway 192.168.181.1 Loading 192.168.181.1:nfs3_1.7_2.4.20.elf ...(ELF)... ................................................................... ................................................................................ ................................................................................ ................................................................................ ................................................................................ ................................................................................ ......................................................................done -retaddr 0X000940A4 EXT_MEM_K=0x0000FC00 ALT_MEM_K=0x0003FC00 Linux version 2.4.20 (root@lzlinux.sh.corp.tyan.com) (gcc version 2.96 20000731 (Red Hat Linux 7.3 2.96-110)) #7 SMP ?? 1?? 17 13:29:48 CST 2003 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000000ba8 type 16 BIOS-e820: 0000000000000ba8 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 00000000000f0400 type 16 BIOS-e820: 0000000000100000 - 0000000010000000 (usable) 256MB LOWMEM available. hm, page 00000000 reserved twice. found SMP MP-table at 00000010 hm, page 00000000 reserved twice. hm, page 00001000 reserved twice. hm, page 00000000 reserved twice. hm, page 00001000 reserved twice. On node 0 totalpages: 65536 zone(0): 4096 pages. zone(1): 61440 pages. zone(2): 0 pages. ACPI: Searched entire block, no RSDP was found. ACPI: Searched entire block, no RSDP was found. ACPI: System description tables not found Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: LNXI Product ID: P4DPE APIC at: 0xFEE00000 Processor #0 Pentium 4(tm) XEON(tm) APIC version 20 Processor #1 Pentium 4(tm) XEON(tm) APIC version 20 I/O APIC #2 Version 32 at 0xFEC00000. I/O APIC #3 Version 32 at 0xFE201000. I/O APIC #4 Version 32 at 0xFE200000. Processors: 2 Kernel command line: root=/dev/nfs rw nfsroot=192.168.181.3:/home/nfsroot/lzroot Initializing CPU#0 Detected 1999.842 MHz processor. Calibrating delay loop... 3984.58 BogoMIPS Memory: 256912k/262144k available (1034k kernel code, 4844k reserved, 407k data, 100k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 4096 (order: 3, 32768 bytes) Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) Page-cache hash table entries: 65536 (order: 6, 262144 bytes) CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#0. CPU0: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 per-CPU timeslice cutoff: 1462.74 usecs. enabled ExtINT on CPU#0 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Booting processor 1/1 eip 2000 Initializing CPU#1 masked ExtINT on CPU#1 ESR value before enabling vector: 00000000 ESR value after enabling vector: 00000000 Calibrating delay loop... 3997.69 BogoMIPS CPU: L1 I cache: 0K, L1 D cache: 8K CPU: L2 cache: 512K CPU: Physical Processor ID: 0 Intel machine check reporting enabled on CPU#1. CPU1: Intel(R) XEON(TM) CPU 2.00GHz stepping 04 Total of 2 processors activated (7982.28 BogoMIPS). cpu_sibling_map[0] = 1 cpu_sibling_map[1] = 0 ENABLING IO-APIC IRQs Setting 2 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 2 ... ok. Setting 3 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 3 ... ok. Setting 4 in the phys_id_present_map ...changing IO-APIC physical APIC ID to 4 ... ok. ..TIMER: vector=0x31 pin1=2 pin2=0 ..MP-BIOS bug: 8254 timer not connected to IO-APIC ...trying to set up timer (IRQ0) through the 8259A ... ..... (found pin 0) ...works. testing the IO APIC....................... .................................... done. Using local APIC timer interrupts. calibrating APIC timer ... ..... CPU clock speed is 1999.8256 MHz. ..... host bus clock speed is 99.9912 MHz. cpu: 0, clocks: 999912, slice: 333304 CPU0 cpu: 1, clocks: 999912, slice: 333304 CPU1 checking TSC synchronization across CPUs: passed. Waiting on wait_init_idle (map = 0x2) All processors have done init_idle PCI: Using configuration type 1 PCI: Probing PCI hardware Transparent bridge - Intel Corp. 82801BA/CA/DB PCI Bridge PCI->APIC IRQ transform: (B0,I29,P0) -> 88 PCI->APIC IRQ transform: (B0,I29,P1) -> 88 PCI->APIC IRQ transform: (B0,I29,P2) -> 88 PCI->APIC IRQ transform: (B0,I31,P0) -> 90 PCI->APIC IRQ transform: (B0,I31,P1) -> 89 Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Initializing RT netlink socket Starting kswapd Installing knfsd (copyright (C) 1996 okir@monad.swb.de). Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI en abled ttyS00 at 0x03f8 (irq = 4) is a 16550A ttyS01 at 0x02f8 (irq = 3) is a 16550A Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH3: IDE controller on PCI bus 00 dev f9 ICH3: chipset revision 2 ICH3: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x3c40-0x3c47, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x3c48-0x3c4f, BIOS settings: hdc:pio, hdd:pio hda: C/H/S=0/0/0 from BIOS ignored ide-floppy driver 0.99.newide Floppy drive(s): fd0 is 1.44M floppy0: no floppy controllers found RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Intel(R) PRO/100 Network Driver - version 2.1.24-k1 Copyright (c) 2002 Intel Corporation PCI: No IRQ known for interrupt pin A of device 04:01.0. Probably buggy MP table . e100: eth0: Intel(R) PRO/100 S Server Adapter Mem:0xfe020000 IRQ:0 Speed:0 Mbps Dx:N/A Hardware receive checksums enabled ide-floppy driver 0.99.newide NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP, IGMP IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 16384) Looking up port of RPC 100003/2 on 192.168.181.3 RPC: sendmsg returned error 101 portmap: RPC call returned error 101 Root-NFS: Unable to get nfsd port number from server, using default Looking up port of RPC 100005/1 on 192.168.181.3 RPC: sendmsg returned error 101 portmap: RPC call returned error 101 Root-NFS: Unable to get mountd port number from server, using default RPC: sendmsg returned error 101 mount: RPC call returned error 101 Root-NFS: Server returned error -101 while mounting /home/nfsroot/lzroot VFS: Unable to mount root fs via NFS, trying floppy. VFS: Insert root floppy and press ENTER