Press any key to continue. Press any key to continue. GNU GRUB version 0.97 (619K lower / 3406336K upper memory) +-------------------------------------------------------------------------+||||||||||||||||||||||||+-------------------------------------------------------------------------+ Use the ^ and v keys to select which entry is highlighted. Press enter to boot the selected OS, 'e' to edit the commands before booting, or 'c' for a command-line. Gentoo Linux 3.2.12 The highlighted entry will be booted automatically in 30 seconds. The highlighted entry will be booted automatically in 29 seconds. Booting 'Gentoo Linux 3.2.12' root (hd0,0) Filesystem type is ext2fs, partition type 0x83 kernel /boot/kernel-3.2.12-gentoo root=/dev/sda2 console=tty0 console=ttyS0,115 200,n8 [Linux-bzImage, setup=0x3200, size=0x522dd0] [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.12-gentoo (root@coreboot) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.5, pie-0.4.7) ) #3 SMP PREEMPT Thu Jun 14 05:44:56 CEST 2012 [ 0.000000] Command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ac00 (usable) [ 0.000000] BIOS-e820: 000000000009ac00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable) [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff98000 (ACPI data) [ 0.000000] BIOS-e820: 00000000cff98000 - 00000000cffc0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000cffc0000 - 00000000d0000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffa00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000041f000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x41f000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000 [ 0.000000] init_memory_mapping: 0000000100000000-000000041f000000 [ 0.000000] ACPI: RSDP 00000000000fbc30 00024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 00000000cff80100 00054 (v01 123011 XSDT1420 20111230 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000cff80290 000F4 (v03 123011 FACP1420 20111230 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000cff80460 0F160 (v01 A1867 A1867001 00000001 INTL 20060113) [ 0.000000] ACPI: FACS 00000000cff98000 00040 [ 0.000000] ACPI: APIC 00000000cff80390 0008C (v01 123011 APIC1420 20111230 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000cff80420 0003C (v01 123011 OEMMCFG 20111230 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000cff98040 00072 (v01 123011 OEMB1420 20111230 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000cff8f8b0 00038 (v01 123011 OEMHPET 20111230 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000cff8f8f0 01714 (v01 A M I POWERNOW 00000001 AMD 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000041f000000 [ 0.000000] Initmem setup node 0 0000000000000000-000000041f000000 [ 0.000000] NODE_DATA [000000041effb000 - 000000041effffff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x0041f000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009a [ 0.000000] 0: 0x00000100 -> 0x000cff80 [ 0.000000] 0: 0x00100000 -> 0x0041f000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x17] enabled) [ 0.000000] ACPI: IOAPIC (id[0x18] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 24, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8300 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009a000 - 000000000009b000 [ 0.000000] PM: Registered nosave memory: 000000000009b000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000 [ 0.000000] PM: Registered nosave memory: 00000000000e2000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff98000 [ 0.000000] PM: Registered nosave memory: 00000000cff98000 - 00000000cffc0000 [ 0.000000] PM: Registered nosave memory: 00000000cffc0000 - 00000000d0000000 [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000ffa00000 [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2fa00000) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff88041ec00000 s76416 r8192 d21888 u262144 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4056901 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ 0 size 32 MB [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ c4000000 [ 0.000000] PM: Registered nosave memory: 00000000c4000000 - 00000000c8000000 [ 0.000000] Memory: 16092424k/17285120k available (7836k kernel code, 787416k absent, 405280k reserved, 5094k data, 652k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3114.509 MHz processor. [ 0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6229.01 BogoMIPS (lpj=3114509) [ 0.004001] pid_max: default: 32768 minimum: 301 [ 0.005017] Security Framework initialized [ 0.006002] SELinux: Initializing. [ 0.008783] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.013323] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.016287] Mount-cache hash table entries: 256 [ 0.017111] Initializing cgroup subsys cpuacct [ 0.018004] Initializing cgroup subsys freezer [ 0.019027] CPU: Physical Processor ID: 0 [ 0.020000] CPU: Processor Core ID: 0 [ 0.021001] mce: CPU supports 7 MCE banks [ 0.022052] ACPI: Core revision 20110623 [ 0.028375] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.039084] CPU0: AMD FX(tm)-8120 Eight-Core Processor stepping 02 [ 0.042996] Performance Events: AMD Family 15h PMU driver. [ 0.043998] ... version: 0 [ 0.044997] ... bit width: 48 [ 0.045997] ... generic registers: 6 [ 0.046997] ... value mask: 0000ffffffffffff [ 0.047997] ... max period: 00007fffffffffff [ 0.048997] ... fixed-purpose events: 0 [ 0.049997] ... event mask: 000000000000003f [ 0.057034] MCE: In-kernel MCE decoding enabled. [ 0.064017] Booting Node 0, Processors #1 [ 0.142017] #2 [ 0.219003] #3 [ 0.295992] #4 [ 0.372978] #5 [ 0.449968] #6 [ 0.526957] #7 Ok. [ 0.599927] Brought up 8 CPUs [ 0.600920] Total of 8 processors activated (49820.29 BogoMIPS). [ 0.603055] PM: Registering ACPI NVS region at cff98000 (163840 bytes) [ 0.603996] RTC time: 20:31:44, date: 12/03/12 [ 0.604945] NET: Registered protocol family 16 [ 0.605959] kworker/u:0 used greatest stack depth: 5424 bytes left [ 0.612708] Extended Config Space enabled on 1 nodes [ 0.612962] ACPI: bus type pci registered [ 0.613961] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.614920] PCI: not using MMCONFIG [ 0.615917] PCI: Using configuration type 1 for base access [ 0.616917] PCI: Using configuration type 1 for extended access [ 0.627614] bio: create slab at 0 [ 0.628961] ACPI: Added _OSI(Module Device) [ 0.629915] ACPI: Added _OSI(Processor Device) [ 0.630915] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.631914] ACPI: Added _OSI(Processor Aggregator Device) [ 0.636128] ACPI: Executed 3 blocks of module-level executable AML code [ 0.684405] ACPI: Interpreter enabled [ 0.684908] ACPI: (supports S0 S1 S3 S4 S5) [ 0.687535] ACPI: Using IOAPIC for interrupt routing [ 0.687922] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.690461] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 0.724934] ACPI: EC: GPE = 0xa, I/O: command/status = 0x66, data = 0x62 [ 0.726008] ACPI: No dock devices found. [ 0.726901] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.728047] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.729034] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] [ 0.729900] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.730900] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.731899] pci_root PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] [ 0.732899] pci_root PNP0A03:00: host bridge window [mem 0xd0000000-0xdfffffff] [ 0.733899] pci_root PNP0A03:00: host bridge window [mem 0xf0000000-0xfebfffff] [ 0.737004] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.739923] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.742907] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.743959] pci 0000:00:14.4: PCI bridge to [bus 04-04] (subtractive decode) [ 0.744960] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 0.747910] pci 0000:00:15.1: PCI bridge to [bus 06-06] [ 0.749275] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.750009] pci0000:00: ACPI _OSC control (0x1d) granted [ 0.756904] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 14 15) [ 0.761297] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 14 15) [ 0.764944] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11 14 15) [ 0.769602] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *9 10 11 14 15) [ 0.772929] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.777579] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.781451] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.785150] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 14 15) *0 [ 0.789931] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.790892] vgaarb: loaded [ 0.791891] vgaarb: bridge control possible 0000:01:05.0 [ 0.792958] SCSI subsystem initialized [ 0.793925] usbcore: registered new interface driver usbfs [ 0.794926] usbcore: registered new interface driver hub [ 0.795929] usbcore: registered new device driver usb [ 0.797915] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.798888] PCI: Using ACPI for IRQ routing [ 0.808544] cfg80211: Calling CRDA to update world regulatory domain [ 0.808983] NetLabel: Initializing [ 0.809887] NetLabel: domain hash size = 128 [ 0.810886] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.811894] NetLabel: unlabeled traffic allowed by default [ 0.812931] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.815886] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.818920] Switching to clocksource hpet [ 0.827405] pnp: PnP ACPI init [ 0.830506] ACPI: bus type pnp registered [ 0.836150] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved [ 0.843148] system 00:09: [mem 0xfee00000-0xfee00fff] has been reserved [ 0.850139] system 00:0a: [io 0x04d0-0x04d1] has been reserved [ 0.856097] system 00:0a: [io 0x040b] has been reserved [ 0.861453] system 00:0a: [io 0x04d6] has been reserved [ 0.866806] system 00:0a: [io 0x0c00-0x0c01] has been reserved [ 0.872769] system 00:0a: [io 0x0c14] has been reserved [ 0.878125] system 00:0a: [io 0x0c50-0x0c51] has been reserved [ 0.884087] system 00:0a: [io 0x0c52] has been reserved [ 0.889444] system 00:0a: [io 0x0c6c] has been reserved [ 0.894798] system 00:0a: [io 0x0c6f] has been reserved [ 0.900155] system 00:0a: [io 0x0cd0-0x0cd1] has been reserved [ 0.906118] system 00:0a: [io 0x0cd2-0x0cd3] has been reserved [ 0.912081] system 00:0a: [io 0x0cd4-0x0cd5] has been reserved [ 0.918043] system 00:0a: [io 0x0cd6-0x0cd7] has been reserved [ 0.924010] system 00:0a: [io 0x0cd8-0x0cdf] has been reserved [ 0.929968] system 00:0a: [io 0x0b00-0x0b3f] has been reserved [ 0.935929] system 00:0a: [io 0x0800-0x089f] has been reserved [ 0.941891] system 00:0a: [io 0x0b00-0x0b1f] has been reserved [ 0.947853] system 00:0a: [io 0x0b20-0x0b3f] has been reserved [ 0.953816] system 00:0a: [io 0x0900-0x090f] has been reserved [ 0.959780] system 00:0a: [io 0x0910-0x091f] has been reserved [ 0.965741] system 00:0a: [io 0xfe00-0xfefe] has been reserved [ 0.971705] system 00:0a: [mem 0xffb80000-0xffbfffff] has been reserved [ 0.978360] system 00:0a: [mem 0xfec10000-0xfec1001f] has been reserved [ 0.985016] system 00:0a: [mem 0xfed80000-0xfed80fff] has been reserved [ 0.991947] system 00:0b: [io 0x0230-0x023f] has been reserved [ 0.997903] system 00:0b: [io 0x0290-0x029f] has been reserved [ 1.003865] system 00:0b: [io 0x0300-0x030f] has been reserved [ 1.009828] system 00:0b: [io 0x0a30-0x0a3f] has been reserved [ 1.015918] system 00:0c: [mem 0xe0000000-0xefffffff] has been reserved [ 1.022758] system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.029761] system 00:0d: [mem 0x000c0000-0x000cffff] could not be reserved [ 1.036763] system 00:0d: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.043764] system 00:0d: [mem 0x00100000-0xcfffffff] could not be reserved [ 1.050769] system 00:0d: [mem 0xfec00000-0xffffffff] could not be reserved [ 1.057846] pnp: PnP ACPI: found 14 devices [ 1.062074] ACPI: ACPI bus type pnp unregistered [ 1.071458] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.076723] pci 0000:00:01.0: bridge window [io 0xc000-0xcfff] [ 1.082861] pci 0000:00:01.0: bridge window [mem 0xfe800000-0xfe9fffff] [ 1.089689] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.097486] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 1.102755] pci 0000:00:09.0: bridge window [io 0xd000-0xdfff] [ 1.108885] pci 0000:00:09.0: bridge window [mem 0xfea00000-0xfeafffff] [ 1.115716] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 1.120981] pci 0000:00:0a.0: bridge window [mem 0xfeb00000-0xfebfffff] [ 1.127812] pci 0000:00:14.4: PCI bridge to [bus 04-04] [ 1.133088] pci 0000:00:15.0: PCI bridge to [bus 05-05] [ 1.138366] pci 0000:00:15.1: PCI bridge to [bus 06-06] [ 1.143635] pci 0000:00:15.1: bridge window [io 0xe000-0xefff] [ 1.149777] pci 0000:00:15.1: bridge window [mem 0xfdf00000-0xfdffffff 64bit pref] [ 1.157579] pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.164331] pci 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.171089] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.177831] pci 0000:00:15.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.184626] NET: Registered protocol family 2 [ 1.189427] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.198329] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.207619] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.214562] TCP: Hash tables configured (established 524288 bind 65536) [ 1.221219] TCP reno registered [ 1.224430] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.230635] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.237312] NET: Registered protocol family 1 [ 1.241818] RPC: Registered named UNIX socket transport module. [ 1.247781] RPC: Registered udp transport module. [ 1.252528] RPC: Registered tcp transport module. [ 1.257276] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.263753] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 1.270683] pci 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.277437] pci 0000:00:12.0: PCI INT A disabled [ 1.282103] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.288885] pci 0000:00:12.2: PCI INT B disabled [ 1.293551] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.300330] pci 0000:00:13.0: PCI INT A disabled [ 1.304993] pci 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.311778] pci 0000:00:13.2: PCI INT B disabled [ 1.316448] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.323226] pci 0000:00:14.5: PCI INT C disabled [ 1.327891] pci 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.334674] pci 0000:00:16.0: PCI INT A disabled [ 1.339336] pci 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 1.346113] pci 0000:00:16.2: PCI INT B disabled [ 1.350799] pci 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.357586] pci 0000:03:00.0: PCI INT A disabled [ 1.362966] PCI-DMA: Disabling AGP. [ 1.366613] PCI-DMA: aperture base @ c4000000 size 65536 KB [ 1.372230] PCI-DMA: using GART IOMMU. [ 1.376042] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.389236] perf: AMD IBS detected (0x000000ff) [ 1.394818] microcode: CPU0: patch_level=0x06000613 [ 1.399740] microcode: CPU1: patch_level=0x06000613 [ 1.404651] microcode: CPU2: patch_level=0x06000613 [ 1.409577] microcode: CPU3: patch_level=0x06000613 [ 1.414503] microcode: CPU4: patch_level=0x06000613 [ 1.419424] microcode: CPU5: patch_level=0x06000613 [ 1.424348] microcode: CPU6: patch_level=0x06000613 [ 1.429269] microcode: CPU7: patch_level=0x06000613 [ 1.434269] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.443398] audit: initializing netlink socket (disabled) [ 1.448851] type=2000 audit(1354566703.447:1): initialized [ 1.492084] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.502609] VFS: Disk quotas dquot_6.5.2 [ 1.506678] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.514288] NTFS driver 2.1.30 [Flags: R/W]. [ 1.518862] msgmni has been set to 31559 [ 1.523451] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.530897] io scheduler noop registered [ 1.534860] io scheduler deadline registered [ 1.539253] io scheduler cfq registered (default) [ 1.544829] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.550526] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled �[ 1.821144] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.904753] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.922395] Non-volatile memory driver v1.3 [ 1.926622] Linux agpgart interface v0.103 [ 1.931068] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.939299] ACPI: Power Button [PWRB] [ 1.943088] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.950530] ACPI: Power Button [PWRF] [ 1.958863] [drm] Initialized drm 1.1.0 20060810 [ 1.963589] [drm] radeon defaulting to kernel modesetting. [ 1.969112] [drm] radeon kernel modesetting enabled. [ 1.974167] radeon 0000:01:05.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.981348] [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1043:0x843E). [ 1.989347] [drm] register mmio base: 0xFE9F0000 [ 1.994035] [drm] register mmio size: 65536 [ 1.998932] ATOM BIOS: 113 [ 2.001693] radeon 0000:01:05.0: VRAM: 368M 0x00000000C0000000 - 0x00000000D6FFFFFF (368M used) [ 2.010438] radeon 0000:01:05.0: GTT: 512M 0x00000000A0000000 - 0x00000000BFFFFFFF [ 2.032132] [drm] Detected VRAM RAM=368M, BAR=256M [ 2.036965] [drm] RAM width 32bits DDR [ 2.040829] [TTM] Zone kernel: Available graphics memory: 8079188 kiB. [ 2.047483] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 2.054139] [TTM] Initializing pool allocator. [ 2.058648] [drm] radeon: 368M of VRAM memory ready [ 2.063566] [drm] radeon: 512M of GTT memory ready. [ 2.068874] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.075528] [drm] Driver supports precise vblank timestamp query. [ 2.081685] [drm] radeon: irq initialized. [ 2.085826] [drm] GART: num cpu pages 131072, num gpu pages 131072 [ 2.092614] [drm] Loading RS780 Microcode [ 2.099950] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000). [ 2.106919] radeon 0000:01:05.0: WB enabled [ 2.143275] [drm] ring test succeeded in 1 usecs [ 2.148060] [drm] radeon: ib pool ready. [ 2.152085] [drm] ib test succeeded in 0 usecs [ 2.157122] [drm] Radeon Display Connectors [ 2.161350] [drm] Connector 0: [ 2.164452] [drm] VGA [ 2.166947] [drm] DDC: 0x7e40 0x7e40 0x7e44 0x7e44 0x7e48 0x7e48 0x7e4c 0x7e4c [ 2.174388] [drm] Encoders: [ 2.177398] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 2.182060] [drm] Connector 1: [ 2.185153] [drm] DVI-D [ 2.187814] [drm] HPD1 [ 2.190389] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c 0x7e5c [ 2.197831] [drm] Encoders: [ 2.200841] [drm] DFP3: INTERNAL_KLDSCP_LVTMA [ 2.205597] [drm] radeon: power management initialized [ 2.298045] [drm] fb mappable at 0xD0142000 [ 2.302273] [drm] vram apper at 0xD0000000 [ 2.306414] [drm] size 9216000 [ 2.309508] [drm] fb depth is 24 [ 2.312776] [drm] pitch is 7680 [ 2.316301] fbcon: radeondrmfb (fb0) is primary device [ 2.364348] Console: switching to colour frame buffer device 240x75 [ 2.388084] Refined TSC clocksource calibration: 3113.984 MHz. [ 2.388087] Switching to clocksource tsc [ 2.398013] fb0: radeondrmfb frame buffer device [ 2.402682] drm: registered panic notifier [ 2.406832] [drm] Initialized radeon 2.12.0 20080528 for 0000:01:05.0 on minor 0 [ 2.416063] brd: module loaded [ 2.420048] loop: module loaded [ 2.423487] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 2.430453] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 2.438716] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part [ 2.447795] scsi0 : ahci [ 2.450490] scsi1 : ahci [ 2.453180] scsi2 : ahci [ 2.455879] scsi3 : ahci [ 2.458572] scsi4 : ahci [ 2.461264] scsi5 : ahci [ 2.463939] ata1: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd00 irq 19 [ 2.471417] ata2: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffd80 irq 19 [ 2.478894] ata3: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe00 irq 19 [ 2.486374] ata4: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7ffe80 irq 19 [ 2.493854] ata5: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff00 irq 19 [ 2.501332] ata6: SATA max UDMA/133 abar m1024@0xfe7ffc00 port 0xfe7fff80 irq 19 [ 2.509096] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.515259] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.520860] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.527992] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.533856] sky2: driver version 1.30 [ 2.537717] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.543361] r8169 0000:06:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2.550712] r8169 0000:06:00.0: eth0: RTL8168evl/8111evl at 0xffffc9000187e000, c8:60:00:60:b1:c2, XID 0c900800 IRQ 44 [ 2.561523] r8169 0000:06:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.570419] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.577036] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.584257] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.589621] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.597115] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.605924] ehci_hcd 0000:00:12.2: debug port 1 [ 2.610532] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe7ff800 [ 2.622020] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.627859] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.634724] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.642027] usb usb1: Product: EHCI Host Controller [ 2.646955] usb usb1: Manufacturer: Linux 3.2.12-gentoo ehci_hcd [ 2.653029] usb usb1: SerialNumber: 0000:00:12.2 [ 2.657835] hub 1-0:1.0: USB hub found [ 2.661637] hub 1-0:1.0: 5 ports detected [ 2.665767] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.672993] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.678350] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.685841] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.698267] ehci_hcd 0000:00:13.2: debug port 1 [ 2.706478] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfe7ff400 [ 2.721022] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.730474] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.740922] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.751824] usb usb2: Product: EHCI Host Controller [ 2.760432] usb usb2: Manufacturer: Linux 3.2.12-gentoo ehci_hcd [ 2.770202] usb usb2: SerialNumber: 0000:00:13.2 [ 2.778713] hub 2-0:1.0: USB hub found [ 2.786162] hub 2-0:1.0: 5 ports detected [ 2.793906] ehci_hcd 0000:00:16.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.804804] ehci_hcd 0000:00:16.2: EHCI Host Controller [ 2.813044] ata5: SATA link down (SStatus 0 SControl 300) [ 2.813078] ata3: SATA link down (SStatus 0 SControl 300) [ 2.813134] ata4: SATA link down (SStatus 0 SControl 300) [ 2.813166] ata6: SATA link down (SStatus 0 SControl 300) [ 2.849886] ehci_hcd 0000:00:16.2: new USB bus registered, assigned bus number 3 [ 2.860910] ehci_hcd 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.873302] ehci_hcd 0000:00:16.2: debug port 1 [ 2.881449] ehci_hcd 0000:00:16.2: irq 17, io mem 0xfe7ff000 [ 2.896018] ehci_hcd 0000:00:16.2: USB 2.0 started, EHCI 1.00 [ 2.905281] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.915601] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.926349] usb usb3: Product: EHCI Host Controller [ 2.934738] usb usb3: Manufacturer: Linux 3.2.12-gentoo ehci_hcd [ 2.944224] usb usb3: SerialNumber: 0000:00:16.2 [ 2.952473] hub 3-0:1.0: USB hub found [ 2.959687] hub 3-0:1.0: 4 ports detected [ 2.967233] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.968059] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.968087] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 2.979344] ata1.00: ATA-8: Corsair Force GT, 1.3.3, max UDMA/133 [ 2.979346] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 2.989730] ata1.00: configured for UDMA/133 [ 2.989816] scsi 0:0:0:0: Direct-Access ATA Corsair Force GT 1.3. PQ: 0 ANSI: 5 [ 2.990027] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB) [ 2.990123] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.990145] sd 0:0:0:0: [sda] Write Protect is off [ 2.990174] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.990523] sda: sda1 sda2 [ 3.084121] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.084368] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.103722] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 3.112916] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 4 [ 3.124237] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfe7fe000 [ 3.188103] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.198777] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.209862] usb usb4: Product: OHCI Host Controller [ 3.218591] usb usb4: Manufacturer: Linux 3.2.12-gentoo ohci_hcd [ 3.228425] usb usb4: SerialNumber: 0000:00:12.0 [ 3.236936] hub 4-0:1.0: USB hub found [ 3.244396] hub 4-0:1.0: 5 ports detected [ 3.252142] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.263037] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 3.272039] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5 [ 3.283164] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe7fd000 [ 3.347099] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.357636] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.368601] usb usb5: Product: OHCI Host Controller [ 3.377201] usb usb5: Manufacturer: Linux 3.2.12-gentoo ohci_hcd [ 3.386928] usb usb5: SerialNumber: 0000:00:13.0 [ 3.395377] hub 5-0:1.0: USB hub found [ 3.402814] hub 5-0:1.0: 5 ports detected [ 3.403377] ata2.00: ATA-8: WDC WD20EARX-00PASB0, 51.0AB51, max UDMA/133 [ 3.403379] ata2.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA [ 3.410290] ata2.00: configured for UDMA/133 [ 3.410371] scsi 1:0:0:0: Direct-Access ATA WDC WD20EARX-00P 51.0 PQ: 0 ANSI: 5 [ 3.410560] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB) [ 3.410563] sd 1:0:0:0: [sdb] 4096-byte physical blocks [ 3.410616] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 3.410625] sd 1:0:0:0: [sdb] Write Protect is off [ 3.410661] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.499551] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 > [ 3.511661] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 3.511922] sd 1:0:0:0: [sdb] Attached SCSI disk [ 3.531162] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 3.540305] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 6 [ 3.551610] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe7fc000 [ 3.616084] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.626780] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.637891] usb usb6: Product: OHCI Host Controller [ 3.646663] usb usb6: Manufacturer: Linux 3.2.12-gentoo ohci_hcd [ 3.656554] usb usb6: SerialNumber: 0000:00:14.5 [ 3.665246] hub 6-0:1.0: USB hub found [ 3.672956] hub 6-0:1.0: 2 ports detected [ 3.680996] ohci_hcd 0000:00:16.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 3.692124] ohci_hcd 0000:00:16.0: OHCI Host Controller [ 3.701365] ohci_hcd 0000:00:16.0: new USB bus registered, assigned bus number 7 [ 3.712749] ohci_hcd 0000:00:16.0: irq 18, io mem 0xfe7f3000 [ 3.777100] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 3.787895] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.799125] usb usb7: Product: OHCI Host Controller [ 3.807980] usb usb7: Manufacturer: Linux 3.2.12-gentoo ohci_hcd [ 3.817977] usb usb7: SerialNumber: 0000:00:16.0 [ 3.826689] hub 7-0:1.0: USB hub found [ 3.834402] hub 7-0:1.0: 4 ports detected [ 3.842450] uhci_hcd: USB Universal Host Controller Interface driver [ 3.852901] usbcore: registered new interface driver usblp [ 3.862374] Initializing USB Mass Storage driver... [ 3.871297] usbcore: registered new interface driver usb-storage [ 3.881362] USB Mass Storage support registered. [ 3.890080] usbcore: registered new interface driver libusual [ 3.899983] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 [ 3.910835] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp [ 3.925352] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 3.934521] mousedev: PS/2 mouse device common for all mice [ 3.944419] rtc_cmos 00:03: RTC can wake from S4 [ 3.953281] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 3.963501] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 3.965458] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 3.987403] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com [ 4.000825] cpuidle: using governor ladder [ 4.010636] cpuidle: using governor menu [ 4.018677] EFI Variables Facility v0.08 2004-May-17 [ 4.028882] usbcore: registered new interface driver usbhid [ 4.038583] usbhid: USB HID core driver [ 4.047029] snd_hda_intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.080034] snd_hda_intel 0000:01:05.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 4.095865] ALSA device list: [ 4.102966] #0: HDA ATI SB at 0xfe7f4000 irq 16 [ 4.111769] #1: HDA ATI HDMI at 0xfe9e8000 irq 19 [ 4.120990] Netfilter messages via NETLINK v0.30. [ 4.129787] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 4.140283] ctnetlink v0.93: registering with nfnetlink. [ 4.150138] ip_tables: (C) 2000-2006 Netfilter Core Team [ 4.159593] TCP cubic registered [ 4.166944] Initializing XFRM netlink socket [ 4.175603] NET: Registered protocol family 10 [ 4.184974] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 4.194489] IPv6 over IPv4 tunneling driver [ 4.203468] NET: Registered protocol family 17 [ 4.212016] Registering the dns_resolver key type [ 4.221139] registered taskstats version 1 [ 4.229569] Magic number: 8:860:547 [ 4.237283] console [netcon0] enabled [ 4.244945] netconsole: network logging started [ 4.253657] md: Waiting for all devices to be available before autodetect [ 4.264475] md: If you don't use raid, use raid=noautodetect [ 4.274356] md: Autodetecting RAID arrays. [ 4.282495] md: Scanned 0 and added 0 devices. [ 4.290924] md: autorun ... [ 4.297683] md: ... autorun DONE. [ 4.306883] EXT3-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 4.327367] EXT2-fs (sda2): error: couldn't mount because of unsupported optional features (240) [ 4.359318] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.370842] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 4.382493] Freeing unused kernel memory: 652k freed [ 4.391453] Write protecting the kernel read-only data: 12288k [ 4.402383] Freeing unused kernel memory: 332k freed [ 4.414828] Freeing unused kernel memory: 1392k freed INIT: version 2.88 booting [ 4.461253] kbd_mode used greatest stack depth: 5328 bytes left [ 4.476877] loadkeys used greatest stack depth: 4440 bytes left [ 4.487073] init-early.sh used greatest stack depth: 4248 bytes left OpenRC 0.9.8.4 is starting up Gentoo Linux (x86_64) Press I to enter interactive boot mode * Mounting /proc ... [ ok ] * Mounting /run ... [ ok ] * /run/lock: creating directory * /run/lock: correcting owner * WARNING: rc_sys not defined in rc.conf. Falling back to automatic detection * Mounting /sys ... [ ok ] * Mounting debug filesystem ... [ ok ] * Mounting cgroup filesystem ... [ ok ] * Mounting /dev ... [ ok ] * Starting udev ... [ ok ] * Populating /dev with existing devices through uevents ... [ ok ] * Waiting for uevents to be processed ... [ ok ] * Mounting /dev/pts ... [ ok ] * Mounting /dev/shm ... [ ok ] * Setting system clock using the hardware clock [Local Time] ... [ ok ] * Autoloaded 0 module(s) * Checking local filesystems ... /dev/sda2: clean, 118053/7323648 files, 1144079/29279232 blocks boot: clean, 33/25688 files, 10427/102400 blocks [ ok ] * Remounting root filesystem read/write ... [ ok ] * Updating /etc/mtab ... [ ok ] * Mounting local filesystems ... [ ok ] * Configuring kernel parameters ... [ ok ] * Creating user login records ... [ ok ] * Cleaning /var/run ... [ ok ] * Wiping /tmp directory ... [ ok ] * Setting hostname to coreboot ... [ ok ] * Setting terminal encoding [UTF-8] ... [ ok ] * Setting keyboard mode [UTF-8] ... [ ok ] * Loading key mappings [sv-latin1] ... [ ok ] * Bringing up interface lo * 127.0.0.1/8 ... [ ok ] * Adding routes * 127.0.0.0/8 via 127.0.0.1 ... [ ok ] * Mounting USB device filesystem [usbfs] ... [ ok ] * Mounting misc binary format filesystem ... [ ok ] * Loading custom binary format handlers ... [ ok ] * Activating swap devices ... [ ok ] * Initializing random number generator ... [ ok ] INIT: Entering runlevel: 3 * Starting metalog ... [ ok ] * Starting DHCP Client Daemon ... [ ok ] * Bringing up interface eth0 * Starting netplug on eth0 ... [ ok ] * Backgrounding ... * WARNING: net.eth0 has started, but is inactive * WARNING: netmount is scheduled to start when net.eth0 has started * Doing udev cleanups * Starting vixie-cron ... [ ok ] * Starting local [ ok ] This is coreboot.unknown_domain (Linux x86_64 3.2.12-gentoo) 20:31:53 coreboot login: root Password: Last login: Thu Nov 29 06:20:05 CET 2012 on ttyS0 root@coreboot ~ # ls vgabios.bin                mv vgabios.bin vgabios.bin  bak root@coreboot ~ # lspci | grep VGA 01:05.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI RS880 [Radeon HD 4250] root@coreboot ~ # cd /sys/bus/pci/devices/0000\:0 0000:00:00.0/ 0000:00:12.2/ 0000:00:14.4/ 0000:00:18.0/ 0000:01:05.0/ 0000:00:01.0/ 0000:00:13.0/ 0000:00:14.5/ 0000:00:18.1/ 0000:01:05.1/ 0000:00:09.0/ 0000:00:13.2/ 0000:00:15.0/ 0000:00:18.2/ 0000:02:00.0/ 0000:00:0a.0/ 0000:00:14.0/ 0000:00:15.1/ 0000:00:18.3/ 0000:02:00.1/ 0000:00:11.0/ 0000:00:14.2/ 0000:00:16.0/ 0000:00:18.4/ 0000:03:00.0/ 0000:00:12.0/ 0000:00:14.3/ 0000:00:16.2/ 0000:00:18.5/ 0000:06:00.0/ root@coreboot ~ # cd /sys/bus/pci/devices/0000\:001.  : :01.0     \:01.0/05   0000:01:05.0/ firmware_node/ remove 0000:01:05.1/ irq rescan broken_parity_status local_cpulist resource class local_cpus subsystem/ config modalias subsystem_device consistent_dma_mask_bits msi_bus subsystem_vendor device numa_node uevent dma_mask_bits pci_bus/ vendor enable power/ root@coreboot ~ # cd /sys/bus/pci/devices/0000\:00\:01.0/0000:01\:01\:05.0/ root@coreboot 0000:01:05.0 # echo 1 > rom root@coreboot 0000:01:05.0 # dd if=rom of=/tmp/vgabios.bin 120+0 records in 120+0 records out 61440 bytes (61 kB) copied, 0.0010504 s, 58.5 MB/s root@coreboot 0000:01:05.0 # echo 0 > rom root@coreboot 0000:01:05.0 # file /tmp/vgabios.bin /tmp/vgabios.bin: BIOS (ia32) ROM Ext. IBM comp. Video (120*512) root@coreboot 0000:01:05.0 # cd /tmp/ root@coreboot tmp # mv vgabios.bin ~/ root@coreboot tmp # cd ~ root@coreboot ~ # diff vgabios.bin va gabios.binbak root@coreboot ~ #