[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.12-gentoo (root@coreboot) (gcc version 4.5.3 (Gentoo 4.5.3-r2 p1.5, pie-0.4.7) ) #3 SMP PREEMPT Thu Jun 14 05:44:56 CEST 2012 [ 0.000000] Command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bffe0000 (usable) [ 0.000000] BIOS-e820: 00000000bffe0000 - 00000000e0000000 (reserved) [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000418000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI present. [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x418000 max_arch_pfn = 0x400000000 [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] mtrr: your BIOS has configured an incorrect mask, fixing it. [ 0.000000] last_pfn = 0xbffe0 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [ffff8800000f12a0] f12a0 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bffe0000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000418000000 [ 0.000000] ACPI: RSDP 00000000000f1280 00014 (v00 CORE ) [ 0.000000] ACPI: RSDT 00000000bffe2424 0003C (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: FACP 00000000bffe4cb8 000F4 (v04 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: DSDT 00000000bffe24c8 027AF (v02 ASUS COREBOOT 00010001 INTL 20090123) [ 0.000000] ACPI: FACS 00000000bffe4c78 00040 [ 0.000000] ACPI: HPET 00000000bffe4db0 00038 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: APIC 00000000bffe4de8 0009A (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: HEST 00000000bffe4e88 001D0 (v01 CORE COREBOOT 00000000 CORE 00000000) [ 0.000000] ACPI: SSDT 00000000bffe5060 01714 (v01 AMD POWERNOW 00000001 AMD 00000001) [ 0.000000] ACPI: SSDT 00000000bffe6780 00045 (v02 CORE COREBOOT 0000002A CORE 0000002A) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-0000000418000000 [ 0.000000] Initmem setup node 0 0000000000000000-0000000418000000 [ 0.000000] NODE_DATA [0000000417ffb000 - 0000000417ffffff] [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00418000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bffe0 [ 0.000000] 0: 0x00100000 -> 0x00418000 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x16] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x17] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x0a] address[0x00000000] gsi_base[24]) [ 0.000000] WARNING: Bogus (zero) I/O APIC address found in table, skipping! [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000 [ 0.000000] SMP: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bffe0000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000 [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000 [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000) [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880417c00000 s76416 r8192 d21888 u262144 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3963242 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=/dev/sda2 console=tty0 console=ttyS0,115200,n8 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340 [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Node 0: aperture @ b292000000 size 32 MB [ 0.000000] Aperture beyond 4GB. Ignoring. [ 0.000000] Your BIOS doesn't leave a aperture memory hole [ 0.000000] Please enable the IOMMU option in the BIOS setup [ 0.000000] This costs you 64 MB of RAM [ 0.000000] Mapping aperture over 65536 KB of RAM @ b4000000 [ 0.000000] PM: Registered nosave memory: 00000000b4000000 - 00000000b8000000 [ 0.000000] Memory: 15722144k/17170432k available (7836k kernel code, 1049156k absent, 399132k reserved, 5094k data, 652k init) [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Preemptible hierarchical RCU implementation. [ 0.000000] NR_IRQS:4352 nr_irqs:744 16 [ 0.000000] Console: colour dummy device 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS0] enabled [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 3100.073 MHz processor. [ 0.002002] Calibrating delay loop (skipped), value calculated using timer frequency.. 6200.14 BogoMIPS (lpj=3100073) [ 0.004002] pid_max: default: 32768 minimum: 301 [ 0.005018] Security Framework initialized [ 0.006002] SELinux: Initializing. [ 0.008673] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.013400] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.016401] Mount-cache hash table entries: 256 [ 0.018073] Initializing cgroup subsys cpuacct [ 0.019004] Initializing cgroup subsys freezer [ 0.021006] CPU: Physical Processor ID: 0 [ 0.022000] CPU: Processor Core ID: 0 [ 0.023001] mce: CPU supports 7 MCE banks [ 0.024057] ACPI: Core revision 20110623 [ 0.027584] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0 [ 0.038426] CPU0: AMD FX(tm)-8120 Eight-Core Processor stepping 02 [ 0.041996] Performance Events: AMD Family 15h PMU driver. [ 0.042998] ... version: 0 [ 0.043997] ... bit width: 48 [ 0.044997] ... generic registers: 6 [ 0.045997] ... value mask: 0000ffffffffffff [ 0.046997] ... max period: 00007fffffffffff [ 0.047997] ... fixed-purpose events: 0 [ 0.048997] ... event mask: 000000000000003f [ 0.056027] MCE: In-kernel MCE decoding enabled. [ 0.063010] Booting Node 0, Processors #1 [ 0.141009] #2 [ 0.217996] #3 [ 0.294985] #4 [ 0.371971] #5 [ 0.448962] #6 [ 0.525950] #7 Ok. [ 0.598926] Brought up 8 CPUs [ 0.599924] Total of 8 processors activated (49597.05 BogoMIPS). [ 0.603073] RTC time: 39:26:46, date: 24/41/25 [ 0.603949] NET: Registered protocol family 16 [ 0.604962] kworker/u:0 used greatest stack depth: 5424 bytes left [ 0.611535] Extended Config Space enabled on 1 nodes [ 0.611965] ACPI: bus type pci registered [ 0.612964] PCI: Using configuration type 1 for base access [ 0.613919] PCI: Using configuration type 1 for extended access [ 0.624980] bio: create slab at 0 [ 0.625958] ACPI: Added _OSI(Module Device) [ 0.626915] ACPI: Added _OSI(Processor Device) [ 0.627915] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.628915] ACPI: Added _OSI(Processor Aggregator Device) [ 0.631568] ACPI: Executed 2 blocks of module-level executable AML code [ 0.635460] ACPI: Interpreter enabled [ 0.635915] ACPI: (supports S0 S1 S2 S3 S4 S5) [ 0.638476] ACPI: BIOS offers _BFS [ 0.638913] ACPI: If "acpi.bfs=1" improves resume, please notify linux-acpi@vger.kernel.org [ 0.639913] ACPI: Using IOAPIC for interrupt routing [ 0.647995] ACPI: Power Resource [PFN0] (on) [ 0.649009] ACPI: No dock devices found. [ 0.649914] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.650956] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.651975] pci_root PNP0A03:00: host bridge window [io 0x0000-0x03af] [ 0.652912] pci_root PNP0A03:00: host bridge window [io 0x03e0-0x0cf7] [ 0.653911] pci_root PNP0A03:00: host bridge window [io 0x03b0-0x03bb] [ 0.654911] pci_root PNP0A03:00: host bridge window [io 0x03c0-0x03df] [ 0.655911] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] [ 0.656911] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] [ 0.657911] pci_root PNP0A03:00: host bridge window [mem 0xe0000000-0xffffffff] [ 0.661285] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.662968] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.665922] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.666967] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 0.669923] pci 0000:00:15.1: PCI bridge to [bus 05-05] [ 0.670985] pci 0000:00:14.4: PCI bridge to [bus 06-ff] (subtractive decode) [ 0.672053] pci0000:00: Requesting ACPI _OSC control (0x1d) [ 0.672909] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d [ 0.673907] ACPI _OSC control for PCIe not granted, disabling ASPM [ 0.679971] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0 [ 0.684129] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0 [ 0.688132] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0 [ 0.691402] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0 [ 0.694401] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0 [ 0.697405] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled. [ 0.699121] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled. [ 0.703129] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0 [ 0.706532] vgaarb: device added: PCI:0000:01:05.0,decodes=io+mem,owns=io+mem,locks=none [ 0.706910] vgaarb: loaded [ 0.707903] vgaarb: bridge control possible 0000:01:05.0 [ 0.708974] SCSI subsystem initialized [ 0.710949] usbcore: registered new interface driver usbfs [ 0.711952] usbcore: registered new interface driver hub [ 0.712939] usbcore: registered new device driver usb [ 0.713940] Advanced Linux Sound Architecture Driver Version 1.0.24. [ 0.714902] PCI: Using ACPI for IRQ routing [ 0.715907] pci 0000:00:01.0: no compatible bridge window for [mem 0xc0000000-0xdfffffff 64bit pref] [ 0.716940] pci 0000:01:05.0: no compatible bridge window for [mem 0xc0000000-0xdfffffff pref] [ 0.718972] cfg80211: Calling CRDA to update world regulatory domain [ 0.720007] NetLabel: Initializing [ 0.720901] NetLabel: domain hash size = 128 [ 0.721900] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.722910] NetLabel: unlabeled traffic allowed by default [ 0.723936] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.725900] hpet0: 3 comparators, 32-bit 14.318180 MHz counter [ 0.728938] Switching to clocksource hpet [ 0.737862] pnp: PnP ACPI init [ 0.740931] ACPI: bus type pnp registered [ 0.745828] pnp: PnP ACPI: found 7 devices [ 0.749932] ACPI: ACPI bus type pnp unregistered [ 0.759288] pci 0000:00:01.0: BAR 15: can't assign mem pref (size 0x20000000) [ 0.766428] pci 0000:01:05.0: BAR 0: can't assign mem pref (size 0x20000000) [ 0.773482] pci 0000:01:05.0: BAR 0: trying firmware assignment [mem 0xc0000000-0xdfffffff pref] [ 0.782266] pci 0000:01:05.0: BAR 0: [mem 0xc0000000-0xdfffffff pref] conflicts with reserved [mem 0xbffe0000-0xdfffffff] [ 0.793226] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 0.798458] pci 0000:00:01.0: bridge window [io 0x1000-0x1fff] [ 0.804556] pci 0000:00:01.0: bridge window [mem 0xe0100000-0xe02fffff] [ 0.811357] pci 0000:00:09.0: PCI bridge to [bus 02-02] [ 0.816586] pci 0000:00:09.0: bridge window [io 0x2000-0x2fff] [ 0.822687] pci 0000:00:09.0: bridge window [mem 0xe0300000-0xe03fffff] [ 0.829473] pci 0000:00:0a.0: PCI bridge to [bus 03-03] [ 0.834707] pci 0000:00:0a.0: bridge window [mem 0xe0400000-0xe04fffff] [ 0.841495] pci 0000:00:14.4: PCI bridge to [bus 06-06] [ 0.846736] pci 0000:00:15.0: PCI bridge to [bus 04-04] [ 0.851969] pci 0000:00:15.1: PCI bridge to [bus 05-05] [ 0.857197] pci 0000:00:15.1: bridge window [io 0x3000-0x3fff] [ 0.863301] pci 0000:00:15.1: bridge window [mem 0xe0000000-0xe00fffff 64bit pref] [ 0.871067] pci 0000:00:15.0: can't derive routing for PCI INT A [ 0.877076] pci 0000:00:15.0: PCI INT A: no GSI [ 0.881633] pci 0000:00:15.1: can't derive routing for PCI INT A [ 0.887639] pci 0000:00:15.1: PCI INT A: no GSI [ 0.892265] NET: Registered protocol family 2 [ 0.897069] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.906019] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 0.915346] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 0.922253] TCP: Hash tables configured (established 524288 bind 65536) [ 0.928867] TCP reno registered [ 0.932038] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 0.938209] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 0.944857] NET: Registered protocol family 1 [ 0.949329] RPC: Registered named UNIX socket transport module. [ 0.955258] RPC: Registered udp transport module. [ 0.959969] RPC: Registered tcp transport module. [ 0.964675] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.971118] pci 0000:00:01.0: MSI quirk detected; subordinate MSI disabled [ 0.978024] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 0.984751] pci 0000:00:12.0: PCI INT A disabled [ 0.989383] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 0.996128] pci 0000:00:12.2: PCI INT B disabled [ 1.000766] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 1.007512] pci 0000:00:13.0: PCI INT A disabled [ 1.012145] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.018891] pci 0000:00:13.2: PCI INT B disabled [ 1.023526] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.030269] pci 0000:00:14.5: PCI INT C disabled [ 1.034899] pci 0000:00:16.0: can't derive routing for PCI INT A [ 1.040905] pci 0000:00:16.0: PCI INT A: no GSI [ 1.045494] pci 0000:00:16.0: can't derive routing for PCI INT A [ 1.051511] pci 0000:00:16.2: can't derive routing for PCI INT B [ 1.057519] pci 0000:00:16.2: PCI INT B: no GSI [ 1.062112] pci 0000:00:16.2: can't derive routing for PCI INT B [ 1.068156] pci 0000:00:0a.0: can't derive routing for PCI INT A [ 1.074166] pci 0000:03:00.0: PCI INT A: no GSI [ 1.078765] pci 0000:00:0a.0: can't derive routing for PCI INT A [ 1.085547] PCI-DMA: Disabling AGP. [ 1.089144] PCI-DMA: aperture base @ b4000000 size 65536 KB [ 1.094726] PCI-DMA: using GART IOMMU. [ 1.098487] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture [ 1.112065] perf: AMD IBS detected (0x000000ff) [ 1.117676] microcode: CPU0: patch_level=0x06000624 [ 1.122566] microcode: CPU1: patch_level=0x06000624 [ 1.127443] microcode: CPU2: patch_level=0x06000624 [ 1.132332] microcode: CPU3: patch_level=0x06000624 [ 1.137218] microcode: CPU4: patch_level=0x06000624 [ 1.142101] microcode: CPU5: patch_level=0x06000624 [ 1.146988] microcode: CPU6: patch_level=0x06000624 [ 1.151869] microcode: CPU7: patch_level=0x06000624 [ 1.156827] microcode: Microcode Update Driver: v2.00 , Peter Oruba [ 1.165915] audit: initializing netlink socket (disabled) [ 1.171332] type=2000 audit(1799854005.170:1): initialized [ 1.216164] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 1.226890] VFS: Disk quotas dquot_6.5.2 [ 1.230931] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.238567] NTFS driver 2.1.30 [Flags: R/W]. [ 1.243125] msgmni has been set to 30836 [ 1.247678] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.255077] io scheduler noop registered [ 1.259015] io scheduler deadline registered [ 1.263371] io scheduler cfq registered (default) [ 1.268632] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 1.274280] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled �[ 1.545137] serial8250: ttyS0 at I/O 0x3f8 (irq = 0) is a 16550A [ 1.824136] serial8250: ttyS1 at I/O 0x2f8 (irq = 0) is a 16550A [ 1.871418] Non-volatile memory driver v1.3 [ 1.875604] Linux agpgart interface v0.103 [ 1.880030] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 1.888212] ACPI: Power Button [PWRB] [ 1.891972] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.899373] ACPI: Power Button [PWRF] [ 1.903201] ACPI: Fan [FAN0] (on) [ 1.928084] thermal LNXTHERM:00: registered as thermal_zone0 [ 1.933751] ACPI: Thermal Zone [TZ00] (40 C) [ 1.938212] [drm] Initialized drm 1.1.0 20060810 [ 1.942906] [drm] radeon defaulting to kernel modesetting. [ 1.948392] [drm] radeon kernel modesetting enabled. [ 1.953407] radeon 0000:01:05.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 1.960567] [drm] initializing kernel modesetting (RS880 0x1002:0x9715 0x1002:0x0000). [ 1.968502] [drm] register mmio base: 0xE0200000 [ 1.973126] [drm] register mmio size: 65536 [ 1.977320] radeon 0000:01:05.0: Invalid ROM contents [ 1.982377] [drm:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM [ 1.988826] radeon 0000:01:05.0: Fatal error during GPU init [ 1.994494] [drm] radeon: finishing device. [ 1.998683] [TTM] Memory type 2 has not been initialized. [ 2.005268] radeon 0000:01:05.0: PCI INT A disabled [ 2.010154] radeon: probe of 0000:01:05.0 failed with error -22 [ 2.018253] brd: module loaded [ 2.022435] loop: module loaded [ 2.025925] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 2.032863] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 2.040954] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part ccc [ 2.050528] scsi0 : ahci [ 2.053244] scsi1 : ahci [ 2.055952] scsi2 : ahci [ 2.058669] scsi3 : ahci [ 2.061395] ata1: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508100 irq 42 [ 2.068798] ata2: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508180 irq 42 [ 2.076200] ata3: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508200 irq 42 [ 2.083599] ata4: SATA max UDMA/133 abar m1024@0xe0508000 port 0xe0508280 irq 42 [ 2.091357] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI [ 2.097465] e100: Copyright(c) 1999-2006 Intel Corporation [ 2.103031] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 2.110080] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 2.112049] Refined TSC clocksource calibration: 3100.111 MHz. [ 2.112053] Switching to clocksource tsc [ 2.125639] sky2: driver version 1.30 [ 2.129468] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.135050] pcieport 0000:00:15.1: can't derive routing for PCI INT A [ 2.141492] r8169 0000:05:00.0: PCI INT A: no GSI [ 2.146637] r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xffffc900025d0000, 00:00:00:00:00:03, XID 0c900800 IRQ 43 [ 2.157330] r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko] [ 2.166156] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.172698] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 2.179843] ehci_hcd 0000:00:12.2: EHCI Host Controller [ 2.185149] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1 [ 2.192550] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.201265] ehci_hcd 0000:00:12.2: debug port 1 [ 2.205819] ehci_hcd 0000:00:12.2: irq 17, io mem 0xe0508400 [ 2.217017] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00 [ 2.222794] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.229577] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.236798] usb usb1: Product: EHCI Host Controller [ 2.241675] usb usb1: Manufacturer: Linux 3.2.12-gentoo ehci_hcd [ 2.247682] usb usb1: SerialNumber: 0000:00:12.2 [ 2.252445] hub 1-0:1.0: USB hub found [ 2.256202] hub 1-0:1.0: 5 ports detected [ 2.260284] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 2.267426] ehci_hcd 0000:00:13.2: EHCI Host Controller [ 2.272713] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 2 [ 2.280115] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround [ 2.288824] ehci_hcd 0000:00:13.2: debug port 1 [ 2.293376] ehci_hcd 0000:00:13.2: irq 19, io mem 0xe0508500 [ 2.305019] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00 [ 2.310794] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.317577] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.324795] usb usb2: Product: EHCI Host Controller [ 2.329672] usb usb2: Manufacturer: Linux 3.2.12-gentoo ehci_hcd [ 2.335679] usb usb2: SerialNumber: 0000:00:13.2 [ 2.340440] hub 2-0:1.0: USB hub found [ 2.344193] hub 2-0:1.0: 5 ports detected [ 2.348276] ehci_hcd 0000:00:16.2: can't derive routing for PCI INT B [ 2.354712] ehci_hcd 0000:00:16.2: PCI INT B: no GSI [ 2.359698] ehci_hcd 0000:00:16.2: Found HC with no IRQ. Check BIOS/PCI 0000:00:16.2 setup! [ 2.368146] ehci_hcd 0000:00:16.2: can't derive routing for PCI INT B [ 2.374585] ehci_hcd 0000:00:16.2: init 0000:00:16.2 fail, -19 [ 2.380471] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.386658] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.393800] ohci_hcd 0000:00:12.0: OHCI Host Controller [ 2.396043] ata3: SATA link down (SStatus 0 SControl 300) [ 2.400045] ata4: SATA link down (SStatus 0 SControl 300) [ 2.409879] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3 [ 2.417302] ohci_hcd 0000:00:12.0: irq 16, io mem 0xe0504000 [ 2.477102] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.483884] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.491102] usb usb3: Product: OHCI Host Controller [ 2.495979] usb usb3: Manufacturer: Linux 3.2.12-gentoo ohci_hcd [ 2.501986] usb usb3: SerialNumber: 0000:00:12.0 [ 2.506750] hub 3-0:1.0: USB hub found [ 2.510509] hub 3-0:1.0: 5 ports detected [ 2.514593] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 2.521740] ohci_hcd 0000:00:13.0: OHCI Host Controller [ 2.527035] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 4 [ 2.534460] ohci_hcd 0000:00:13.0: irq 18, io mem 0xe0505000 [ 2.595105] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.601895] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.609113] usb usb4: Product: OHCI Host Controller [ 2.613993] usb usb4: Manufacturer: Linux 3.2.12-gentoo ohci_hcd [ 2.620017] usb usb4: SerialNumber: 0000:00:13.0 [ 2.624773] hub 4-0:1.0: USB hub found [ 2.628529] hub 4-0:1.0: 5 ports detected [ 2.632613] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 2.639759] ohci_hcd 0000:00:14.5: OHCI Host Controller [ 2.645053] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5 [ 2.652473] ohci_hcd 0000:00:14.5: irq 18, io mem 0xe0506000 [ 2.713086] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 2.719868] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.727088] usb usb5: Product: OHCI Host Controller [ 2.731966] usb usb5: Manufacturer: Linux 3.2.12-gentoo ohci_hcd [ 2.737985] usb usb5: SerialNumber: 0000:00:14.5 [ 2.742751] hub 5-0:1.0: USB hub found [ 2.746504] hub 5-0:1.0: 2 ports detected [ 2.750577] ohci_hcd 0000:00:16.0: can't derive routing for PCI INT A [ 2.757021] ohci_hcd 0000:00:16.0: PCI INT A: no GSI [ 2.762013] ohci_hcd 0000:00:16.0: Found HC with no IRQ. Check BIOS/PCI 0000:00:16.0 setup! [ 2.770448] ohci_hcd 0000:00:16.0: can't derive routing for PCI INT A [ 2.776882] ohci_hcd 0000:00:16.0: init 0000:00:16.0 fail, -19 [ 2.782769] uhci_hcd: USB Universal Host Controller Interface driver [ 2.789227] usbcore: registered new interface driver usblp [ 2.794711] Initializing USB Mass Storage driver... [ 2.799654] usbcore: registered new interface driver usb-storage [ 2.805656] USB Mass Storage support registered. [ 2.810331] usbcore: registered new interface driver libusual [ 2.816167] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 2.826882] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.831969] mousedev: PS/2 mouse device common for all mice [ 2.837786] rtc_cmos 00:01: RTC can wake from S4 [ 2.842516] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 12.092027] ata2: softreset failed (1st FIS failed) [ 12.096931] ata1: softreset failed (1st FIS failed) [ 22.096030] ata2: softreset failed (1st FIS failed) [ 22.102029] ata1: softreset failed (1st FIS failed) [ 57.101029] ata2: softreset failed (1st FIS failed) [ 57.105917] ata2: limiting SATA link speed to 3.0 Gbps [ 57.111082] ata1: softreset failed (1st FIS failed) [ 57.115974] ata1: limiting SATA link speed to 3.0 Gbps [ 62.112027] ata2: softreset failed (1st FIS failed) [ 62.116915] ata2: reset failed, giving up [ 62.122022] ata1: softreset failed (1st FIS failed) [ 62.126910] ata1: reset failed, giving up [ 62.845002] INFO: rcu_preempt detected stalls on CPUs/tasks: { 0} (detected by 1, t=60002 jiffies) [ 62.846001] Pid: 0, comm: swapper/1 Tainted: G I 3.2.12-gentoo #3 [ 62.846001] Call Trace: [ 62.846001] [] __rcu_pending+0x3f1/0x420 [ 62.846001] [] rcu_check_callbacks+0x14a/0x290 [ 62.846001] [] update_process_times+0x43/0x80 [ 62.846001] [] tick_sched_timer+0x5b/0xb0 [ 62.846001] [] __run_hrtimer+0x7c/0x260 [ 62.846001] [] ? tick_nohz_handler+0xf0/0xf0 [ 62.846001] [] hrtimer_interrupt+0xf2/0x220 [ 62.846001] [] smp_apic_timer_interrupt+0x63/0xa0 [ 62.846001] [] apic_timer_interrupt+0x6b/0x70 [ 62.846001] [] ? sched_clock_cpu+0xa8/0x120 [ 62.846001] [] ? default_idle+0x53/0x230 [ 62.846001] [] ? default_idle+0x1e/0x230 [ 62.846001] [] cpu_idle+0x7f/0xc0 [ 62.846001] [] start_secondary+0x18f/0x194