INIT detected from --- { APICID = 00 NODEID = 00 COREID = 00} --- Issuing SOFT_RESET... LinuxBIOS-1.1.8_s2881_Fallback Thu May 11 18:44:48 EDT 2006 starting... (0,1) link=00 (1,0) link=00 02 nodes initialized. SBLink=02 NC node|link=02 Ram1.00 Ram1.01 Ram2.00 Ram2.01 Ram3 Initializing memory: done Initializing memory: done Ram4 v_esp=000cfd64 testx = 5a5a5a5a Copying data from cache to ram -- switching to use ram as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to ram. src=fffe0000 dst=00004000 linxbios_ram.bin length = 00022ff0 Jumping to LinuxBIOS. LinuxBIOS-1.1.8_s2881_Fallback Thu May 11 18:44:48 EDT 2006 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] enabled PCI: 00:19.3 siblings=1 CPU: APIC: 02 enabled CPU: APIC: 03 enabled PCI: pci_scan_bus for bus 0 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:19.0 [1022/1100] enabled PCI: 00:19.1 [1022/1101] enabled PCI: 00:19.2 [1022/1102] enabled PCI: 00:19.3 [1022/1103] enabled PCI: 01:00.0 [1022/7450] enabled PCI: 01:01.0 [1022/7450] enabled next_unitid: 0003 PCI: 01:00.0 [1022/7460] enabled PCI: 01:03.0 [1022/7460] enabled next_unitid: 0007 PCI: pci_scan_bus for bus 1 PCI: 01:01.0 [1022/7450] enabled PCI: 01:01.1 [1022/7451] enabled PCI: 01:02.0 [1022/7450] enabled PCI: 01:02.1 [1022/7451] enabled PCI: 01:03.0 [1022/7460] enabled PCI: 01:04.0 [1022/7468] enabled PCI: 01:04.1 [1022/7469] enabled PCI: 01:04.2 [1022/746a] enabled PCI: 01:04.3 [1022/746b] enabled PCI: pci_scan_bus for bus 2 PCI: 02:09.0 [14e4/1648] enabled PCI: 02:09.1 [14e4/1648] enabled Disabling static device: PCI: 02:0a.0 Disabling static device: PCI: 02:0a.1 PCI: pci_scan_bus returning with max=02 PCI: 02: 100MHz PCI-X PCI: pci_scan_bus for bus 3 PCI: pci_scan_bus returning with max=03 PCI: 03: 133MHz PCI-X PCI: pci_scan_bus for bus 4 PCI: 04:00.0 [1022/7464] enabled PCI: 04:00.1 [1022/7464] enabled PCI: 04:05.0 [1095/3114] enabled PCI: 04:06.0 [1002/4752] enabled PCI: pci_scan_bus returning with max=04 PNP: 002e.0 enabled PNP: 002e.1 disabled PNP: 002e.2 enabled PNP: 002e.3 disabled PNP: 002e.5 enabled PNP: 002e.6 disabled PNP: 002e.7 disabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled PNP: 002e.b enabled smbus: PCI: 01:04.3[0]->I2C: 01:50 enabled smbus: PCI: 01:04.3[0]->I2C: 01:51 enabled smbus: PCI: 01:04.3[0]->I2C: 01:52 enabled smbus: PCI: 01:04.3[0]->I2C: 01:53 enabled smbus: PCI: 01:04.3[0]->I2C: 01:54 enabled smbus: PCI: 01:04.3[0]->I2C: 01:55 enabled smbus: PCI: 01:04.3[0]->I2C: 01:56 enabled smbus: PCI: 01:04.3[0]->I2C: 01:57 enabled smbus: PCI: 01:04.3[0]->I2C: 01:2d enabled smbus: PCI: 01:04.3[0]->I2C: 01:2a enabled smbus: PCI: 01:04.3[0]->I2C: 01:49 enabled smbus: PCI: 01:04.3[0]->I2C: 01:4a enabled PCI: pci_scan_bus returning with max=04 PCI: pci_scan_bus returning with max=04 done Allocating resources... Reading resources... PCI: 01:01.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 2 io PCI: 01:01.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 2 prefmem PCI: 01:03.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 4 prefmem Done reading resources. Allocating VGA resource PCI: 04:06.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 01:03.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... VGA: PCI: 00:18.0 (aka node 0) link 2 has VGA device PCI: 00:18.0 1ba <- [0x00fd300000 - 0x00fd2fffff] prefmem PCI: 00:18.0 1c2 <- [0x0000001000 - 0x0000002fff] io PCI: 00:18.0 1b2 <- [0x00fc000000 - 0x00fd2fffff] mem PCI: 01:01.0 20 <- [0x00fd100000 - 0x00fd1fffff] bus 2 mem PCI: 02:09.0 10 <- [0x00fd100000 - 0x00fd10ffff] mem64 PCI: 02:09.0 18 <- [0x00fd110000 - 0x00fd11ffff] mem64 PCI: 02:09.1 10 <- [0x00fd120000 - 0x00fd12ffff] mem64 PCI: 02:09.1 18 <- [0x00fd130000 - 0x00fd13ffff] mem64 PCI: 01:01.1 10 <- [0x00fd200000 - 0x00fd200fff] mem64 PCI: 01:02.1 10 <- [0x00fd201000 - 0x00fd201fff] mem64 PCI: 01:03.0 1c <- [0x0000001000 - 0x0000001fff] bus 4 io PCI: 01:03.0 20 <- [0x00fc000000 - 0x00fd0fffff] bus 4 mem PCI: 04:00.0 10 <- [0x00fd000000 - 0x00fd000fff] mem PCI: 04:00.1 10 <- [0x00fd001000 - 0x00fd001fff] mem PCI: 04:05.0 10 <- [0x0000001410 - 0x0000001417] io PCI: 04:05.0 14 <- [0x0000001430 - 0x0000001433] io PCI: 04:05.0 18 <- [0x0000001420 - 0x0000001427] io PCI: 04:05.0 1c <- [0x0000001440 - 0x0000001443] io PCI: 04:05.0 20 <- [0x0000001400 - 0x000000140f] io PCI: 04:05.0 24 <- [0x00fd003000 - 0x00fd0033ff] mem PCI: 04:06.0 10 <- [0x00fc000000 - 0x00fcffffff] mem PCI: 04:06.0 14 <- [0x0000001000 - 0x00000010ff] io PCI: 04:06.0 18 <- [0x00fd002000 - 0x00fd002fff] mem PCI: 04:06.0 30 <- [0x00fff80000 - 0x00fff9ffff] romem PNP: 002e.0 60 <- [0x00000003f0 - 0x00000003f7] io PNP: 002e.0 70 <- [0x0000000006 - 0x0000000006] irq PNP: 002e.0 74 <- [0x0000000002 - 0x0000000002] drq PNP: 002e.2 60 <- [0x00000003f8 - 0x00000003ff] io PNP: 002e.2 70 <- [0x0000000004 - 0x0000000004] irq PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq PNP: 002e.5 72 <- [0x000000000c - 0x000000000c] irq PNP: 002e.b 60 <- [0x0000000290 - 0x0000000297] io PNP: 002e.b 70 <- [0x0000000005 - 0x0000000005] irq PCI: 01:04.1 20 <- [0x0000002420 - 0x000000242f] io PCI: 01:04.2 10 <- [0x0000002400 - 0x000000241f] io PCI: 01:04.3 58 <- [0x0000002000 - 0x00000020ff] io PCI: 00:18.3 94 <- [0x00f8000000 - 0x00fbffffff] mem PCI: 00:19.3 94 <- [0x00f8000000 - 0x00fbffffff] mem Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 140 PCI: 01:01.0 bridge ctrl <- 0003 PCI: 01:01.0 cmd <- 146 PCI: 02:09.0 subsystem <- 10f1/2881 PCI: 02:09.0 cmd <- 142 PCI: 02:09.1 subsystem <- 10f1/2881 PCI: 02:09.1 cmd <- 142 PCI: 01:01.1 subsystem <- 10f1/2881 PCI: 01:01.1 cmd <- 146 PCI: 01:02.1 subsystem <- 10f1/2881 PCI: 01:02.1 cmd <- 146 PCI: 01:03.0 bridge ctrl <- 040b PCI: 01:03.0 cmd <- 147 PCI: 04:00.0 subsystem <- 10f1/2881 PCI: 04:00.0 cmd <- 142 PCI: 04:00.1 subsystem <- 10f1/2881 PCI: 04:00.1 cmd <- 142 PCI: 04:05.0 subsystem <- 10f1/2881 PCI: 04:05.0 cmd <- 143 PCI: 04:06.0 subsystem <- 10f1/2881 PCI: 04:06.0 cmd <- 1c3 PCI: 01:04.0 subsystem <- 10f1/2881 PCI: 01:04.0 cmd <- 14f w83627hf hwm smbus enabled PCI: 01:04.1 subsystem <- 10f1/2881 PCI: 01:04.1 cmd <- 141 PCI: 01:04.2 subsystem <- 10f1/2881 PCI: 01:04.2 cmd <- 141 PCI: 01:04.3 subsystem <- 10f1/2881 PCI: 01:04.3 cmd <- 141 PCI: 00:18.1 subsystem <- 10f1/2881 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 10f1/2881 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 PCI: 00:19.0 cmd <- 140 PCI: 00:19.1 cmd <- 140 PCI: 00:19.2 cmd <- 140 PCI: 00:19.3 cmd <- 140 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init Initializing CPU #0 CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success Setting up local apic... apic_id: 0 done. Clearing memory 2048K - 1048576K: --------------- done CPU #0 Initialized start_eip=0x00018000 Initializing CPU #1 CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success Setting up local apic... apic_id: 1 done. CPU #1 Initialized start_eip=0x00018000 Initializing CPU #2 CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success Setting up local apic... apic_id: 2 done. Clearing memory 1048576K - 2097152K: ---------------- done CPU #2 Initialized start_eip=0x00018000 Initializing CPU #3 Waiting for 1 CPUS to stop CPU: vendor AMD device 20f12 Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled microcode: equivalent processor rev id = 0x0210, patch id = 0x00000000 microcode: patch id that want to apply= 0x0000004d microcode: updated to patch id = 0x0000004d success Setting up local apic... apic_id: 3 done. CPU #3 Initialized All AP CPUs stopped PCI: 00:18.0 init PCI: 01:01.0 init PCI: 02:09.0 init PCI: 02:09.1 init PCI: 01:03.0 init PCI: 04:05.0 init PCI: 04:06.0 init rom address for PCI: 04:06.0 = fff80000 copying VGA ROM Image from 0xfff80000 to 0xc0000, 0x8000 bytes entering emulator halt_sys: file /data/personal/data/2006/projects/gnu/chimera/linuxbios/lbv2/rev-latest/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387 PCI: 01:04.0 init amd8111: ioapic bsp_apicid = 00 RTC Init Invalid CMOS LB checksum enabling HPET @0xfed00000 PNP: 002e.0 init PNP: 002e.2 init PNP: 002e.5 init PNP: 002e.b init PCI: 01:04.1 init IDE1 IDE0 PCI: 01:04.3 init set power on after power fail smbus: PCI: 01:04.3[0]->I2C: 01:2d init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:19.0 init PCI: 00:19.1 init PCI: 00:19.2 init PCI: 00:19.3 init NB: Function 3 Misc Control.. done. Devices initialized Writing IRQ routing tables to 0xf0000...done. Wrote the mp table end at: 00000020 - 000001f4 Moving GDT to 0x500...ok Wrote linuxbios table at: 00000530 - 00000df8 checksum f454 Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffc0000 - 0xfffdffff Found ELF candiate at offset 0 New segment addr 0x100000 size 0x3b500 offset 0xc0 filesize 0x11748 (cleaned up) New segment addr 0x100000 size 0x3b500 offset 0xc0 filesize 0x11748 New segment addr 0x13b500 size 0x48 offset 0x11820 filesize 0x48 (cleaned up) New segment addr 0x13b500 size 0x48 offset 0x11820 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x0000000000100000 memsz: 0x000000000003b500 filesz: 0x0000000000011748 Clearing Segment: addr: 0x0000000000111748 memsz: 0x0000000000029db8 Loading Segment: addr: 0x000000000013b500 memsz: 0x0000000000000048 filesz: 0x0000000000000048 Jumping to boot code at 0x10cbcc FILO version 0.5 (root@countzero) Thu May 11 18:21:40 EDT 2006 collect_linuxbios_info: Searching for LinuxBIOS tables... find_lb_table: Found canidate at: 00000530 find_lb_table: header checksum o.k. find_lb_table: table checksum o.k. find_lb_table: record count o.k. collect_linuxbios_info: Found LinuxBIOS table at: 00000530 convert_memmap: 0x00000000000000 0x00000000000e64 16 convert_memmap: 0x00000000000e64 0x0000000009f19c 1 convert_memmap: 0x000000000c0000 0x00000000030000 1 convert_memmap: 0x000000000f0000 0x00000000000400 16 convert_memmap: 0x000000000f0400 0x0000003ff0fc00 1 convert_memmap: 0x00000040000000 0x00000040000000 1 pci_init: Scanning PCI: found 23 devices pci_init: 00:18.0 1022:1100 0600 00 pci_init: 00:18.1 1022:1101 0600 00 pci_init: 00:18.2 1022:1102 0600 00 pci_init: 00:18.3 1022:1103 0600 00 pci_init: 00:19.0 1022:1100 0600 00 pci_init: 00:19.1 1022:1101 0600 00 pci_init: 00:19.2 1022:1102 0600 00 pci_init: 00:19.3 1022:1103 0600 00 pci_init: 01:01.0 1022:7450 0604 00 pci_init: 01:01.1 1022:7451 0800 10 pci_init: 01:02.0 1022:7450 0604 00 pci_init: 01:02.1 1022:7451 0800 10 pci_init: 01:03.0 1022:7460 0604 00 pci_init: 01:04.0 1022:7468 0601 00 pci_init: 01:04.1 1022:7469 0101 8a pci_init: 01:04.2 1022:746a 0c05 00 pci_init: 01:04.3 1022:746b 0680 00 pci_init: 02:09.0 14e4:1648 0200 00 pci_init: 02:09.1 14e4:1648 0200 00 pci_init: 04:00.0 1022:7464 0c03 10 pci_init: 04:00.1 1022:7464 0c03 10 pci_init: 04:05.0 1095:3114 0180 00 pci_init: 04:06.0 1002:4752 0300 00 find_ide_controller: found PCI IDE controller 1095:3114 prog_if=0x0 find_ide_controller: primary channel: native PCI mode find_ide_controller: cmd_base=0x1410 ctrl_base=0x1430 ide_software_reset: Waiting for ide0 to become ready for reset... ok init_drive: Testing for hda init_drive: Probing for hda init_drive: LBA mode, sectors=145226112 init_drive: LBA48 mode, sectors=145226112 init_drive: Init device params... ok hda: LBA48 74GB: WDC WD740GD-00FLC0 init_drive: Testing for hdb init_drive: Probing for hdb init_drive: LBA mode, sectors=145226112 init_drive: LBA48 mode, sectors=145226112 init_drive: Init device params... ok hdb: LBA48 74GB: WDC WD740GD-00FLC0 Mounted ext2fs Found Linux version 2.6.16.2 (root@chimera.gnu.org) #3 SMP Thu Apr 20 13:49:15 EDT 2006 bzImage. Loading kernel... ok Jumping to entry point... ACPI: Unable to locate RSDP * Starting RAID devices... [ ok ] * Starting hardware event daemon... [ ok ] * Mounting a tmpfs over /dev... [ ok ] * Creating initial device nodes... [ ok ] * Setting disc parameters... [ ok ] * Checking root file system... /: clean, 2752621/25378816 files, 47171788/50743248 blocks [ ok ] * Initializing modules... [ ok ] * Cleaning up ifupdown... [ ok ] * Setting the system clock... [ ok ] * Setting up LVM Volume Groups... [ ok ] * Checking all file systems... /boot: clean, 41/32064 files, 32823/64128 blocks /tmp: clean, 11/732960 files, 55826/1463856 blocks [ ok ] * Mounting local filesystems... /dev/md0 on /boot type ext3 (rw) /dev/md1 on /tmp type ext3 (rw) [ ok ] * Setting sensors limits... [ ok ] * Restoring resolver state... [ ok ] * Setting up networking... [ ok ] * Starting hotplug subsystem... [ ok ] * Configuring network interfaces... [ ok ] * Waiting for network interface to come up... [ ok ] Loading the saved-state of the serial devices... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A /dev/ttyS1 at 0x02f8 (irq = 3) is a 16550A * Setting up ALSA... [ ok ] * Setting the system clock... [ ok ] * Synchronizing clock to ntp.ubuntulinux.org... [ ok ] * Initializing random number generator... [ ok ] * Entering runlevel: 2 * Starting system log daemon... [ ok ] * Starting kernel log daemon... [ ok ] Starting amavisd: head: cannot open `/etc/mailname' for reading: No such file or directory amavisd-new. * Starting OpenBSD Secure Shell server... [ ok ] Setting sysfs variables...done. sadc not enabled in /etc/default/sysstat, not starting. * Starting RAID monitoring services... [ ok ] * Starting deferred execution scheduler... [ ok ] * Starting periodic command scheduler... [ ok ] * Id "T0" respawning too fast: disabled for 5 minutes Debian GNU/Linux ttyS0 115200 (DIRECT) **EMSI_REQA77E chimera.gnu.org login: