Re: [coreboot] Patch: New board: Bcom WinNET P680

[Uwe Hermann]

On Tue, Oct 14, 2008 at 03:27:04PM -0500, Alex Mauer wrote:
> Index: src/mainboard/bcom/winnetp680/Config.lb
>
> --- src/mainboard/bcom/winnetp680/Config.lb	(revision 3654)
> +++ src/mainboard/bcom/winnetp680/Config.lb	(working copy)
> @@ -99,16 +99,14 @@
>        register "ide1_80pin_cable" = "0"
>        register "fn_ctrl_lo" = "0x80"
>        register "fn_ctrl_hi" = "0x1d"
>  device pci a.0 on end			# Firewire
>  device pci f.0 on end			# SATA
>  device pci f.1 on end			# IDE
>  device pci 10.0 on end			# OHCI
>  device pci 10.1 on end			# OHCI
>  device pci 10.2 on end			# OHCI
>  device pci 10.3 on end			# OHCI
>  device pci f.0 on end			# IDE
>  device pci 10.0 on end			# UHCI
>  device pci 10.1 on end			# UHCI
>  device pci 10.2 on end			# UHCI
>  device pci 10.3 on end			# UHCI
>  device pci 10.4 on end			# EHCI
>  device pci 11.0 on			# Southbridge LPC
>    chip superio/fintek/f71805f		# Super I/O
>    chip superio/winbond/w83697hf		# Super I/O
>      device pnp 2e.0 off			# Floppy
>        io 0x60 = 0x3f0
>        irq 0x70 = 6

At least the Super I/O parts are incorrect for the w83697hf, I talked
with Alex on IRC about this, he'll post an updated patch today.

Uwe.