On Fri, 7 Nov 2008 04:24:38 +0200, "Elia Yehuda" <
z4ziggy@gmail.com> wrote:
> tnx Joseph,
>
> i've fixed the following (to match my 256kb bios) :
>
> device pci_domain 0 on
>
> device pci 0.0 on end # Host bridge
> chip drivers/pci/onboard
> device pci 1.0 on end # Onboard video
> register "rom_address" = "0xfffc0000"
> end
> ...
> end
>
> and now the rom_address is set AND i see the device in lspci :
> lspci:
> 00:01.0 VGA compatible controller: Intel Corporation 82810E DC-133 (CGC)
> Chipset Graphics Controller (rev 03)
> lspci -n:
> 00:01.0 0300: 8086:7125 (rev 03)
>
> but still no vga-output!
> i found the following to might suggest another problem :
>
> PCI Expansion ROM, signature 0xaa55, INIT size 0xa000, data ptr 0x0110
> PCI ROM Image, Vendor 8086, Device 0000,
> Device or Vendor ID mismatch Vendor 8086, Device 0000
>
> and no "copying VGA ROM Image"...
Yep that is your problem. Is there something wrong with your vga bios. It