Yes. So I want to to get the signal from this solder pad and see on the oscilloscope that everything works.
Please who have the ASUS F2A85-M tell me the package marking of the serial port PHY (I want to find a datasheet).
Who uses this mainboard, please send me a working binary file... Let the video I don't get, but I want to at least see post codes. However, here the VGAbios of the card that I use:
No one is works in my configuration:(
The CPU is AMD Athlon X2 340.
But I think it shouldn't be so difficult. On the coreboot website the board is listed as supported.
I think I'm doing something wrong.
Thank you all for your time, friends!
With best wishes
Maxim
-------- Original Message --------
Subject: Re: [coreboot] Coreboot binary for ASUS F2A85-M
Local Time: 23 Января 2017 г. 7:04 вечера
UTC Time: 23 Января 2017 г. 16:04
From: kyosti.malkki@gmail.com
To: Maxim Gusev <mail@maximgusev.com>
Please reply to the list.
With the RS232 PHY missing, you should have 3.3V level TXD from superio on one of the solder pads.
KM