Hi Paul,
Those changes to the IFWI blob worked great, thanks!
I have attached the serial console log. It looks like we are in similar situations now.
I got a hang of around 45s at “MRC: region file invalid in 'RW_VAR_MRC_CACHE”,
and then it hangs indefinitely at the end of the log.
I tracked the MRC cache message down to this line:
https://github.com/coreboot/coreboot/blob/master/src/soc/intel/common/mrc_cache.c#L272
I’m stuck again for the moment. Thanks again Paul for getting me one step closer.
Cheers,
Cameron
Cameron Craig |
Graduate Software Engineer |
Exterity Limited
tel: +44 1383 828 250 | fax:
e: Cameron.Craig@exterity.com | w:
www.exterity.com
From: coreboot
[mailto:coreboot-bounces@coreboot.org] On Behalf Of Cameron Craig
Sent: 28 September 2017 16:51
To: 'Paul Penz'; coreboot@coreboot.org
Subject: Re: [coreboot] Intel Leaf Hill Coreboot Trouble
Hi Paul,
Great to hear I’m not the only one in this situation
J
I’ve just been using the IWFI file from Intel with no modifications, so I’ll look out the FIT tool and give that a go.
Thanks,
Cameron
Cameron Craig | Graduate Software Engineer |
Exterity Limited
tel: +44 1383 828 250 | fax:
e:
Cameron.Craig@exterity.com | w: www.exterity.com
From:
coreboot [mailto:coreboot-bounces@coreboot.org]
On Behalf Of Paul Penz
Sent: 28 September 2017 15:35
To: coreboot@coreboot.org
Subject: Re: [coreboot] Intel Leaf Hill Coreboot Trouble
Hi Cameron,
I had the same problem.
Had you modified the intel IFWI file ?
If not, I had done this additional:
Download 522538_apl txe hf 3.0.11.1131 (th2 & rs1).zip from intel
Start fit.exe
Load the IFWI file
Change at Platform Protection/Platform Integrity OOEM Public Key Hash => 00..00
Change at Platform Protection/Boot Guard Configuration/ Boot profile 2 => 0
Save
Now I get output on the console and postcodes, but during FSP_M a long pause of ca. 45s exists and it hangs later during FSP_P initialization.
Good luck
Paul
Paul Penz
Dipl.-Ing. (FH)
Senior Hardware Engineer
ELTEC Elektronik AG, Mainz
_________________________
Fon +49 6131 918 335
Fax +49 6131 918 195
Email
ppenz@eltec.de
Web
www.eltec.de
*********************************************************
ELTEC Elektronik AG
Galileo-Galilei-Straße 11
D-55129 Mainz
Vorstand: Peter Albert
Aufsichtsratsvorsitzender: Andreas Kochhäuser
Registergericht: Amtsgericht Mainz
Registernummer: HRB 7038
Ust-ID: DE 149 049 790
*********************************************************
Wichtiger Hinweis:
Diese E-Mail kann Betriebs- oder Geschäftsgeheimnisse oder sonstige vertrauliche Informationen enthalten. Sollten Sie diese E-Mail irrtümlich erhalten haben, ist Ihnen eine Kenntnisnahme des Inhalts, eine Vervielfältigung oder Weitergabe der E-Mail ausdrücklich
untersagt.
Bitte benachrichtigen Sie uns und vernichten Sie die empfangene E-Mail. Evtl. Anhänge dieser Nachricht wurden auf Viren überprüft!
Jede Form von Vervielfältigung, Abänderung, Verbreitung oder Veröffentlichung dieser E-Mail Nachricht ist untersagt! Das Verwenden von Informationen aus dieser Nachricht für irgendwelche Zwecke ist strengstens untersagt.
Es gelten unsere Allgemeinen Geschäftsbedingungen, zu finden unter
www.eltec.de.
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________
______________________________________________________________________
This email has been scanned by the Symantec Email Security.cloud service.
For more information please visit http://www.symanteccloud.com
______________________________________________________________________