INIT detected from --- { APICID = 00 NODEID = 00 COREID = 00} --- Issuing SOFT_RESET... LinuxBIOS-2.0.0_m57sli_Fallback Tue Apr 3 17:34:26 EDT 2007 starting... *sysinfo range: [000cf000,000cf730) bsp_apicid=00 core0 started: started ap apicid: 01 SBLink=00 NC node|link=00 begin msr fid, vid 310a120a0a0c020c end msr fid, vid 310a120a0a0c020c mcp55_num:01 Ram1.00 Ram2.00 Unbuffered 400Mhz Interleaved RAM: 0x00200000 KB Ram3 dimm_mask = 00000011 x4_mask = 00000000 x16_mask = 00000000 single_rank_mask = 00000000 ODC = 00113222 Addr Timing= 00202520 Initializing memory: done Setting variable MTRR 2, base: 0MB, range: 2048MB, type WB set DQS timing:RcvrEn:Pass1: 00 CTLRMaxDelay=1a done set DQS timing:DQSPos: 00 done set DQS timing:RcvrEn:Pass2: 00 CTLRMaxDelay=2c done Total DQS Training : tsc [00]=00000000322adb2c Total DQS Training : tsc [01]=000000003373fbbf Total DQS Training : tsc [02]=000000009c69548f Total DQS Training : tsc [03]=000000009d823787 Ram4 v_esp=000cee20 testx = 5a5a5a5a Copying data from cache to RAM -- switching to use RAM as stack... Done testx = 5a5a5a5a Disabling cache as ram now Clearing initial memory region: Done Copying LinuxBIOS to RAM. src=fffdf000 dst=00100000 linxbios_ram.nrv2b length = 0000d2f2 linxbios_ram.bin length = 00021830 Jumping to LinuxBIOS. LinuxBIOS-2.0.0_m57sli_Fallback Tue Apr 3 17:34:26 EDT 2007 booting... Enumerating buses... APIC_CLUSTER: 0 enabled PCI_DOMAIN: 0000 enabled PCI: 00:18.3 siblings=1 CPU: APIC: 00 enabled CPU: APIC: 01 enabled PCI: pci_scan_bus for bus 00 PCI: 00:18.0 [1022/1100] enabled PCI: 00:18.1 [1022/1101] enabled PCI: 00:18.2 [1022/1102] enabled PCI: 00:18.3 [1022/1103] enabled PCI: 00:00.0 [10de/0369] enabled PCI: 00:00.0 [10de/0369] enabled next_unitid: 0010 PCI: pci_scan_bus for bus 00 PCI: 00:00.0 [10de/0369] enabled PCI: 00:01.0 [10de/0360] enabled PCI: 00:01.1 [10de/0368] enabled PCI: 00:01.2 [10de/036a] enabled PCI: 00:01.3 [10de/036b] enabled PCI: 00:02.0 [10de/036c] enabled PCI: 00:02.1 [10de/036d] enabled PCI: 00:04.0 [10de/036e] enabled PCI: 00:05.0 [10de/037f] enabled PCI: 00:05.1 [10de/037f] enabled PCI: 00:05.2 [10de/037f] enabled PCI: 00:06.0 [10de/0370] enabled PCI: 00:06.1 [10de/0371] enabled PCI: 00:08.0 [10de/0373] enabled PCI: 00:0a.0 [10de/0376] enabled PCI: 00:0b.0 [10de/0374] enabled PCI: 00:0c.0 [10de/0374] enabled PCI: 00:0d.0 [10de/0378] enabled PCI: 00:0e.0 [10de/0375] enabled PCI: 00:0f.0 [10de/0377] enabled PNP: 002e.0 disabled PNP: 002e.1 enabled PNP: 002e.2 disabled PNP: 002e.3 disabled PNP: 002e.4 disabled PNP: 002e.5 enabled PNP: 002e.6 enabled PNP: 002e.8 disabled PNP: 002e.9 disabled PNP: 002e.a disabled smbus: PCI: 00:01.1[0]->I2C: 01:50 enabled smbus: PCI: 00:01.1[0]->I2C: 01:51 enabled smbus: PCI: 00:01.1[0]->I2C: 01:52 enabled smbus: PCI: 00:01.1[0]->I2C: 01:53 enabled smbus: PCI: 00:01.1[0]->I2C: 01:54 enabled smbus: PCI: 00:01.1[0]->I2C: 01:55 enabled smbus: PCI: 00:01.1[0]->I2C: 01:56 enabled smbus: PCI: 00:01.1[0]->I2C: 01:57 enabled smbus: PCI: 00:01.1[1]->I2C: 02:51 enabled PCI: pci_scan_bus for bus 01 PCI: pci_scan_bus returning with max=001 PCI: pci_scan_bus for bus 02 PCI: 02:00.0 [10de/0392] enabled PCI: pci_scan_bus returning with max=002 PCI: pci_scan_bus for bus 03 PCI: pci_scan_bus returning with max=003 PCI: pci_scan_bus for bus 04 PCI: pci_scan_bus returning with max=004 PCI: pci_scan_bus for bus 05 PCI: pci_scan_bus returning with max=005 PCI: pci_scan_bus for bus 06 PCI: pci_scan_bus returning with max=006 PCI: pci_scan_bus for bus 07 PCI: pci_scan_bus returning with max=007 PCI: pci_scan_bus returning with max=007 PCI: pci_scan_bus returning with max=007 done Allocating resources... Reading resources... PCI: 00:06.0 1c <- [0x000000f000 - 0x000000efff] bus 01 io PCI: 00:06.0 24 <- [0x00fff00000 - 0x00ffefffff] bus 01 prefmem PCI: 00:06.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 01 mem PCI: 00:0b.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 03 io PCI: 00:0b.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 03 prefmem PCI: 00:0b.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 03 mem PCI: 00:0c.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 04 io PCI: 00:0c.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 04 prefmem PCI: 00:0c.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 04 mem PCI: 00:0d.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 05 io PCI: 00:0d.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 05 prefmem PCI: 00:0d.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 05 mem PCI: 00:0e.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 06 io PCI: 00:0e.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 06 prefmem PCI: 00:0e.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 06 mem PCI: 00:0f.0 1c <- [0x00fffff000 - 0x00ffffefff] bus 07 io PCI: 00:0f.0 24 <- [0xfffffffffff00000 - 0xffffffffffefffff] bus 07 prefmem PCI: 00:0f.0 20 <- [0x00fff00000 - 0x00ffefffff] bus 07 mem Done reading resources. Allocating VGA resource PCI: 02:00.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:0a.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI: 00:18.0 Setting PCI_BRIDGE_CTL_VGA for bridge PCI_DOMAIN: 0000 Setting PCI_BRIDGE_CTL_VGA for bridge Root Device Setting resources... VGA: PCI: 00:18.0 (aka node 0) link 0 has VGA device PCI: 00:18.0 1c0 <- [0x0000001000 - 0x0000003fff] io PCI: 00:18.0 1b8 <- [0x00e0000000 - 0x00efffffff] prefmem PCI: 00:18.0 1b0 <- [0x00f4000000 - 0x00f61fffff] mem PCI: 00:01.0 14 <- [0x00f6144000 - 0x00f6144fff] mem PNP: 002e.1 60 <- [0x00000003f8 - 0x00000003ff] io PNP: 002e.1 70 <- [0x0000000004 - 0x0000000004] irq PNP: 002e.5 60 <- [0x0000000060 - 0x0000000060] io PNP: 002e.5 62 <- [0x0000000064 - 0x0000000064] io PNP: 002e.5 70 <- [0x0000000001 - 0x0000000001] irq PNP: 002e.6 70 <- [0x000000000c - 0x000000000c] irq PCI: 00:01.1 10 <- [0x0000002c00 - 0x0000002c3f] io PCI: 00:01.1 20 <- [0x0000002c40 - 0x0000002c7f] io PCI: 00:01.1 24 <- [0x0000002c80 - 0x0000002cbf] io PCI: 00:01.1 60 <- [0x0000002000 - 0x00000020ff] io PCI: 00:01.1 64 <- [0x0000002400 - 0x00000024ff] io PCI: 00:01.1 68 <- [0x0000002800 - 0x00000028ff] io PCI: 00:01.3 10 <- [0x00f6100000 - 0x00f613ffff] mem PCI: 00:02.0 10 <- [0x00f6145000 - 0x00f6145fff] mem PCI: 00:02.1 10 <- [0x00f614a000 - 0x00f614a0ff] mem PCI: 00:04.0 20 <- [0x0000002cc0 - 0x0000002ccf] io PCI: 00:05.0 10 <- [0x0000003000 - 0x0000003007] io PCI: 00:05.0 14 <- [0x0000003070 - 0x0000003073] io PCI: 00:05.0 18 <- [0x0000003010 - 0x0000003017] io PCI: 00:05.0 1c <- [0x0000003080 - 0x0000003083] io PCI: 00:05.0 20 <- [0x0000002cd0 - 0x0000002cdf] io PCI: 00:05.0 24 <- [0x00f6146000 - 0x00f6146fff] mem PCI: 00:05.1 10 <- [0x0000003020 - 0x0000003027] io PCI: 00:05.1 14 <- [0x0000003090 - 0x0000003093] io PCI: 00:05.1 18 <- [0x0000003030 - 0x0000003037] io PCI: 00:05.1 1c <- [0x00000030a0 - 0x00000030a3] io PCI: 00:05.1 20 <- [0x0000002ce0 - 0x0000002cef] io PCI: 00:05.1 24 <- [0x00f6147000 - 0x00f6147fff] mem PCI: 00:05.2 10 <- [0x0000003040 - 0x0000003047] io PCI: 00:05.2 14 <- [0x00000030b0 - 0x00000030b3] io PCI: 00:05.2 18 <- [0x0000003050 - 0x0000003057] io PCI: 00:05.2 1c <- [0x00000030c0 - 0x00000030c3] io PCI: 00:05.2 20 <- [0x0000002cf0 - 0x0000002cff] io PCI: 00:05.2 24 <- [0x00f6148000 - 0x00f6148fff] mem PCI: 00:06.1 10 <- [0x00f6140000 - 0x00f6143fff] mem PCI: 00:08.0 10 <- [0x00f6149000 - 0x00f6149fff] mem PCI: 00:08.0 14 <- [0x0000003060 - 0x0000003067] io PCI: 00:08.0 18 <- [0x00f614b000 - 0x00f614b0ff] mem PCI: 00:08.0 1c <- [0x00f614c000 - 0x00f614c00f] mem PCI: 00:0a.0 1c <- [0x0000001000 - 0x0000001fff] bus 02 io PCI: 00:0a.0 24 <- [0x00e0000000 - 0x00efffffff] bus 02 prefmem PCI: 00:0a.0 20 <- [0x00f4000000 - 0x00f60fffff] bus 02 mem PCI: 02:00.0 10 <- [0x00f4000000 - 0x00f4ffffff] mem PCI: 02:00.0 14 <- [0x00e0000000 - 0x00efffffff] prefmem64 PCI: 02:00.0 1c <- [0x00f5000000 - 0x00f5ffffff] mem64 PCI: 02:00.0 24 <- [0x0000001000 - 0x000000107f] io PCI: 02:00.0 30 <- [0x00f6000000 - 0x00f601ffff] romem PCI: 00:18.3 94 <- [0x00f0000000 - 0x00f3ffffff] mem Done setting resources. Done allocating resources. Enabling resources... PCI: 00:18.0 cmd <- 140 PCI: 00:00.0 subsystem <- 1022/2b80 PCI: 00:00.0 cmd <- 146 PCI: 00:01.0 subsystem <- 1022/2b80 PCI: 00:01.0 cmd <- 14f mcp55 lpc decode:PNP: 002e.1, base=0x000003f8, end=0x000003ff mcp55 lpc decode:PNP: 002e.5, base=0x00000060, end=0x00000060 mcp55 lpc decode:PNP: 002e.5, base=0x00000064, end=0x00000064 PCI: 00:01.1 subsystem <- 1022/2b80 PCI: 00:01.1 cmd <- 141 PCI: 00:01.2 cmd <- 540 PCI: 00:01.3 cmd <- 142 PCI: 00:02.0 subsystem <- 1022/2b80 PCI: 00:02.0 cmd <- 142 PCI: 00:02.1 subsystem <- 1022/2b80 PCI: 00:02.1 cmd <- 142 PCI: 00:04.0 subsystem <- 1022/2b80 PCI: 00:04.0 cmd <- 141 PCI: 00:05.0 subsystem <- 1022/2b80 PCI: 00:05.0 cmd <- 143 PCI: 00:05.1 subsystem <- 1022/2b80 PCI: 00:05.1 cmd <- 143 PCI: 00:05.2 subsystem <- 1022/2b80 PCI: 00:05.2 cmd <- 143 PCI: 00:06.0 bridge ctrl <- 0a03 PCI: 00:06.0 cmd <- 144 PCI: 00:06.1 subsystem <- 1022/2b80 PCI: 00:06.1 cmd <- 142 PCI: 00:08.0 subsystem <- 1022/2b80 PCI: 00:08.0 cmd <- 143 PCI: 00:0a.0 bridge ctrl <- 000b PCI: 00:0a.0 cmd <- 147 PCI: 02:00.0 cmd <- 143 PCI: 00:0b.0 bridge ctrl <- 0003 PCI: 00:0b.0 cmd <- 140 PCI: 00:0c.0 bridge ctrl <- 0003 PCI: 00:0c.0 cmd <- 140 PCI: 00:0d.0 bridge ctrl <- 0003 PCI: 00:0d.0 cmd <- 140 PCI: 00:0e.0 bridge ctrl <- 0003 PCI: 00:0e.0 cmd <- 140 PCI: 00:0f.0 bridge ctrl <- 0003 PCI: 00:0f.0 cmd <- 140 PCI: 00:18.1 subsystem <- 1022/2b80 PCI: 00:18.1 cmd <- 140 PCI: 00:18.2 subsystem <- 1022/2b80 PCI: 00:18.2 cmd <- 140 PCI: 00:18.3 cmd <- 140 done. Initializing devices... Root Device init APIC_CLUSTER: 0 init start_eip=0x00005000, offset=0x00110000, code_size=0x0000005b Final : tsc [0a]=000000011362fa07 Initializing CPU #0 CPU: vendor AMD device 40fb2 CPU: family 0f, model 4b, stepping 02 brandId=08cd Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU model Mobile AMD Sempron(tm) Processor 3700+ Setting up local apic... apic_id: 0x00 done. ECC Disabled CPU #0 Initialized Initializing CPU #1 Waiting for 1 CPUS to stop CPU: vendor AMD device 40fb2 CPU: family 0f, model 4b, stepping 02 brandId=08cd Enabling cache Setting fixed MTRRs(0-88) type: UC Setting fixed MTRRs(0-16) Type: WB, RdMEM, WrMEM Setting fixed MTRRs(24-88) Type: WB, RdMEM, WrMEM DONE fixed MTRRs Setting variable MTRR 0, base: 0MB, range: 2048MB, type WB DONE variable MTRRs Clear out the extra MTRR's MTRR check Fixed MTRRs : Enabled Variable MTRRs: Enabled CPU model Mobile AMD Sempron(tm) Processor 3700+ Setting up local apic... apic_id: 0x01 done. CPU #1 Initialized All AP CPUs stopped Final : tsc [0b]=000000012498c6b6 PCI: 00:18.0 init PCI: 00:01.0 init set power on after power fail RTC Init Invalid CMOS LB checksum PNP: 002e.1 init PNP: 002e.5 init PNP: 002e.6 init PCI: 00:01.1 init PCI: 00:02.1 init PCI: 00:04.0 init IDE0 PCI: 00:05.0 init SATA S SATA P PCI: 00:05.1 init SATA S SATA P PCI: 00:05.2 init SATA S SATA P PCI: 00:06.0 init dev_root mem base = 0x00e0000000 [0x50] <-- 0xe0000000 PCI: 00:06.1 init base = f6140000 codec_mask = 01 codec viddid: 10ec0883 No verb! PCI: 00:08.0 init MCP55 MAC PHY ID 0x01410c00 PHY ADDR 1 PCI: 00:0a.0 init PCI: 00:0b.0 init PCI: 00:0c.0 init PCI: 00:0d.0 init PCI: 00:0e.0 init PCI: 00:0f.0 init PCI: 00:18.1 init PCI: 00:18.2 init PCI: 00:18.3 init NB: Function 3 Misc Control.. done. PCI: 00:01.2 init PCI: 00:01.3 init PCI: 02:00.0 init rom address for PCI: 02:00.0 = f6000000 copying VGA ROM Image from 0xf6000000 to 0xc0000, 0xee00 bytes entering emulator halt_sys: file /home/ward/lb/LinuxBIOSv2/src/devices/emulator/x86emu/ops.c, line 4387 Devices initialized Writing IRQ routing tables to 0xf0000...done. Wrote the mp table end at: 00000020 - 00000274 Adjust low_table_end from 0x00000500 to 0x00001000 Adjust rom_table_end from 0x000f0400 to 0x00100000 Wrote linuxbios table at: 00000500 - 00000db0 checksum 95ff Welcome to elfboot, the open sourced starter. January 2002, Eric Biederman. Version 1.3 rom_stream: 0xfffc0000 - 0xfffdefff Found ELF candidate at offset 0 New segment addr 0x100000 size 0x407c0 offset 0xc0 filesize 0x16808 (cleaned up) New segment addr 0x100000 size 0x407c0 offset 0xc0 filesize 0x16808 New segment addr 0x1407c0 size 0x48 offset 0x168e0 filesize 0x48 (cleaned up) New segment addr 0x1407c0 size 0x48 offset 0x168e0 filesize 0x48 Dropping non PT_LOAD segment Dropping non PT_LOAD segment Loading Segment: addr: 0x000000007ff84000 memsz: 0x000000000003e000 filesz: 0x0000000000016808 Clearing Segment: addr: 0x000000007ff9a808 memsz: 0x00000000000277f8 Loading Segment: addr: 0x00000000001407c0 memsz: 0x0000000000000048 filesz: 0x0000000000000048 Loading Segment: addr: 0x000000000013e000 memsz: 0x00000000000027c0 filesz: 0x0000000000000000 Clearing Segment: addr: 0x000000000013e000 memsz: 0x00000000000027c0 Jumping to boot code at 0x10fc84 FILO version 0.5 (root@countzero) Tue Apr 3 17:31:54 EDT 2007 collect_sys_info: boot eax = 0xe1fb007 collect_sys_info: boot ebx = 0x7ffe2700 collect_sys_info: boot arg = 0x7ffe2700 malloc_diag: alloc: 0 bytes (0 blocks), free: 16376 bytes (1 blocks) malloc_diag: alloc: 24 bytes (1 blocks), free: 16352 bytes (1 blocks) collect_elfboot_info: Bootloader: elfboot collect_elfboot_info: Version: 1.3 malloc_diag: alloc: 40 bytes (2 blocks), free: 16336 bytes (1 blocks) collect_linuxbios_info: Searching for LinuxBIOS tables... find_lb_table: Found canidate at: 00000500 find_lb_table: header checksum o.k. find_lb_table: table checksum o.k. find_lb_table: record count o.k. collect_linuxbios_info: Found LinuxBIOS table at: 00000500 convert_memmap: 0x00000000000000 0x00000000001000 16 convert_memmap: 0x00000000001000 0x0000000009f000 1 convert_memmap: 0x000000000c0000 0x00000000030000 1 convert_memmap: 0x000000000f0000 0x00000000010000 16 convert_memmap: 0x00000000100000 0x0000007ff00000 1 collect_sys_info: 0000000000001000-00000000000a0000 collect_sys_info: 00000000000c0000-00000000000f0000 collect_sys_info: 0000000000100000-0000000080000000 collect_sys_info: RAM 2048 MB relocate: Current location: 0x100000-0x140807 relocate: Relocating to 0x7ffbf7f0-0x7ffffff7... ok setup_timers: CPU 2000 MHz pci_init: Scanning PCI: found 25 devices malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) pci_init: 00:00.0 10de:0369 0500 00 pci_init: 00:01.0 10de:0360 0601 00 pci_init: 00:01.1 10de:0368 0c05 00 pci_init: 00:01.2 10de:036a 0500 00 pci_init: 00:01.3 10de:036b 0b40 00 pci_init: 00:02.0 10de:036c 0c03 10 pci_init: 00:02.1 10de:036d 0c03 20 pci_init: 00:04.0 10de:036e 0101 8a pci_init: 00:05.0 10de:037f 0101 85 pci_init: 00:05.1 10de:037f 0101 85 pci_init: 00:05.2 10de:037f 0101 85 pci_init: 00:06.0 10de:0370 0604 00 pci_init: 00:06.1 10de:0371 0403 00 pci_init: 00:08.0 10de:0373 0680 00 pci_init: 00:0a.0 10de:0376 0604 00 pci_init: 00:0b.0 10de:0374 0604 00 pci_init: 00:0c.0 10de:0374 0604 00 pci_init: 00:0d.0 10de:0378 0604 00 pci_init: 00:0e.0 10de:0375 0604 00 pci_init: 00:0f.0 10de:0377 0604 00 pci_init: 00:18.0 1022:1100 0600 00 pci_init: 00:18.1 1022:1101 0600 00 pci_init: 00:18.2 1022:1102 0600 00 pci_init: 00:18.3 1022:1103 0600 00 pci_init: 02:00.0 10de:0392 0300 00 menu: hde1:/boot/grub/menu.lst malloc_diag: alloc: 368 bytes (4 blocks), free: 16008 bytes (1 blocks) file_open: dev=hde1, path=/boot/grub/menu.lst find_ide_controller: found PCI IDE controller 10de:037f prog_if=0x85 find_ide_controller: primary channel: native PCI mode find_ide_controller: cmd_base=0x3000 ctrl_base=0x3070 ide_software_reset: Waiting for ide2 to become ready for reset... ok init_drive: Testing for hde init_drive: Probing for hde init_drive: LBA mode, sectors=268435455 init_drive: LBA48 mode, sectors=488397168 init_drive: Init device params... ok hde: LBA48 250GB: WDC WD2500JS-60NCB1 init_drive: Testing for hdf init_drive: Probing for hdf print_status: IDE: status=0x0, err=0x0 init_drive: Testing for hdf init_drive: Probing for hdf print_status: IDE: status=0x0, err=0x0 devopen: Partition 1 start 63 length 476327187 Mounted ext2fs malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press any key to continue. Press `ESC' to enter the menu... 2 Press `ESC' to enter the menu... 1 Press `ESC' to enter the menu... 0 Booting 'Ubuntu LB, kernel 2.6.21-rc3' root (hd4,0) kernel /boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro apic=debug acpi_dbg_level=0x ffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=tt yS0,115200 boot Booting 'hde1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro apic=debug acpi_dbg_le vel=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 cons ole=ttyS0,115200' malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.21-rc3 devopen: already open malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.21-rc3 devopen: already open malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) Found Linux version 2.6.21-rc3 (root@neuromancer) #1 SMP PREEMPT Mon Mar 12 15:10:47 EDT 2007 (protocol 0x204) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 0000000000001000 - 00000000000a0000 set_memory_size: 00000000000c0000 - 00000000000f0000 set_memory_size: 0000000000100000 - 0000000080000000 set_memory_size: ramtop=0x80000000 set_memory_size: ext_mem_k=64512, alt_mem_k=2096128 parse_command_line: original command line: "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200" parse_command_line: kernel command line at 0x91000 parse_command_line: kernel command line (135 bytes): "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200" load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1d1473 Loading kernel... 10 consecutive blocks 43910301 - 43910310 len=1905267 ret=512 Can't read kernel malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hde1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro apic=debug acpi_dbg_le vel=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 cons ole=ttyS0,115200' malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.21-rc3 devopen: already open malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.21-rc3 devopen: already open malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) Found Linux version 2.6.21-rc3 (root@neuromancer) #1 SMP PREEMPT Mon Mar 12 15:10:47 EDT 2007 (protocol 0x204) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 0000000000001000 - 00000000000a0000 set_memory_size: 00000000000c0000 - 00000000000f0000 set_memory_size: 0000000000100000 - 0000000080000000 set_memory_size: ramtop=0x80000000 set_memory_size: ext_mem_k=64512, alt_mem_k=2096128 parse_command_line: original command line: "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200" parse_command_line: kernel command line at 0x91000 parse_command_line: kernel command line (135 bytes): "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200" load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1d1473 Loading kernel... 10 consecutive blocks 43910301 - 43910310 len=1905267 ret=512 Can't read kernel malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) root (hd4,0) kernel /boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro apic=debug acpi_dbg_level=0xff ffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS 0,115200 boot Booting 'hde1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro apic=debug acpi_dbg_leve l=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 consol e=ttyS0,115200' malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1 devopen: already open malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1 devopen: already open malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) Found Linux version 2.6.20.1 (root@neuromancer) #1 SMP PREEMPT Thu Mar 8 12:14:22 EST 2007 (protocol 0x204) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 0000000000001000 - 00000000000a0000 set_memory_size: 00000000000c0000 - 00000000000f0000 set_memory_size: 0000000000100000 - 0000000080000000 set_memory_size: ramtop=0x80000000 set_memory_size: ext_mem_k=64512, alt_mem_k=2096128 parse_command_line: original command line: "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200" parse_command_line: kernel command line at 0x91000 parse_command_line: kernel command line (135 bytes): "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200" load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1cd437 Loading kernel... 10 consecutive blocks 43933698 - 43933707 len=1888823 ret=512 Can't read kernel malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hde1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro apic=debug acpi_dbg_leve l=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 consol e=ttyS0,115200' malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1 devopen: already open malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 544 bytes (5 blocks), free: 15832 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.20.1 devopen: already open malloc_diag: alloc: 528 bytes (4 blocks), free: 15848 bytes (1 blocks) Found Linux version 2.6.20.1 (root@neuromancer) #1 SMP PREEMPT Thu Mar 8 12:14:22 EST 2007 (protocol 0x204) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 0000000000001000 - 00000000000a0000 set_memory_size: 00000000000c0000 - 00000000000f0000 set_memory_size: 0000000000100000 - 0000000080000000 set_memory_size: ramtop=0x80000000 set_memory_size: ext_mem_k=64512, alt_mem_k=2096128 parse_command_line: original command line: "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200" parse_command_line: kernel command line at 0x91000 parse_command_line: kernel command line (135 bytes): "root=/dev/sda1 ro apic=debug acpi_dbg_level=0xffffffff pci=noacpi,routeirq snd-hda-intel.enable_msi=1 console=tty0 console=ttyS0,115200" load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1cd437 Loading kernel... 10 consecutive blocks 43933698 - 43933707 len=1888823 ret=512 Can't read kernel malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) root (hd4,0) kernel /boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/hde1 ro noapic console= tty0 console=ttyS0,115200 initrd /boot/initrd.img-2.6.15-23-amd64-generic boot Booting 'hde1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/hde1 ro noapic co nsole=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-23-amd64-generic ' malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic devopen: already open malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic devopen: already open malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) Found Linux version 2.6.15-23-amd64-generic (buildd@yellow) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006 (protocol 0x204) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 0000000000001000 - 00000000000a0000 set_memory_size: 00000000000c0000 - 00000000000f0000 set_memory_size: 0000000000100000 - 0000000080000000 set_memory_size: ramtop=0x80000000 set_memory_size: ext_mem_k=64512, alt_mem_k=2096128 parse_command_line: original command line: "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-23-amd64-generic" parse_command_line: kernel command line at 0x91000 malloc_diag: alloc: 568 bytes (5 blocks), free: 15808 bytes (1 blocks) parse_command_line: initrd=/boot/initrd.img-2.6.15-23-amd64-generic parse_command_line: kernel command line (58 bytes): "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200" load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1689b7 Loading kernel... 10 consecutive blocks 43909653 - 43909662 len=1476535 ret=512 Can't read kernel malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hde1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/hde1 ro noapic co nsole=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-23-amd64-generic ' malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic devopen: already open malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) elf_load: Not a bootable ELF image malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks) file_open: dev=hde1, path=/boot/vmlinuz-2.6.15-23-amd64-generic devopen: already open malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) Found Linux version 2.6.15-23-amd64-generic (buildd@yellow) #1 SMP PREEMPT Tue May 23 13:45:47 UTC 2006 (protocol 0x204) (loadflags 0x1) bzImage. init_linux_params: Setting up paramters at 0x90000 set_memory_size: 0000000000001000 - 00000000000a0000 set_memory_size: 00000000000c0000 - 00000000000f0000 set_memory_size: 0000000000100000 - 0000000080000000 set_memory_size: ramtop=0x80000000 set_memory_size: ext_mem_k=64512, alt_mem_k=2096128 parse_command_line: original command line: "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200 initrd=/boot/initrd.img-2.6.15-23-amd64-generic" parse_command_line: kernel command line at 0x91000 malloc_diag: alloc: 568 bytes (5 blocks), free: 15808 bytes (1 blocks) parse_command_line: initrd=/boot/initrd.img-2.6.15-23-amd64-generic parse_command_line: kernel command line (58 bytes): "root=/dev/hde1 ro noapic console=tty0 console=ttyS0,115200" load_linux_kernel: offset=0x1e00 addr=0x100000 size=0x1689b7 Loading kernel... 10 consecutive blocks 43909653 - 43909662 len=1476535 ret=512 Can't read kernel malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) root (hd0,0) kernel /boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=ttyS0,1 15200 noapic boot Booting 'hda1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=t tyS0,115200 noapic' malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.21-rc3 find_ide_controller: found PCI IDE controller 10de:036e prog_if=0x8a find_ide_controller: primary channel: compatibility mode find_ide_controller: cmd_base=0x1f0 ctrl_base=0x3f4 ide_software_reset: Waiting for ide0 to become ready for reset... ok init_drive: Testing for hda init_drive: Probing for hda print_status: IDE: status=0x51, err=0x4 init_drive: Testing for hda init_drive: Probing for hda hda: ATAPI: PIONEER DVD-RW DVR-111D pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x60 atapi_request_sense: 70 00 06 00 00 00 00 0e 00 00 00 00 29 00 00 00 00 00 pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hda1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=t tyS0,115200 noapic' malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.21-rc3 pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) root (hd0,0) kernel /boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=ttyS0,1 15200 single noapic boot Booting 'hda1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=t tyS0,115200 single noapic' malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.21-rc3 pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hda1:/boot/vmlinuz-2.6.21-rc3 root=/dev/sda1 ro console=tty0 console=t tyS0,115200 single noapic' malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.21-rc3 pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) root (hd0,0) kernel /boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=ttyS0,115 200 noapic boot Booting 'hda1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=tty S0,115200 noapic' malloc_diag: alloc: 448 bytes (4 blocks), free: 15928 bytes (1 blocks) malloc_diag: alloc: 464 bytes (5 blocks), free: 15912 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.20.1 pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 448 bytes (4 blocks), free: 15928 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hda1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=tty S0,115200 noapic' malloc_diag: alloc: 448 bytes (4 blocks), free: 15928 bytes (1 blocks) malloc_diag: alloc: 464 bytes (5 blocks), free: 15912 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.20.1 pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 448 bytes (4 blocks), free: 15928 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) root (hd0,0) kernel /boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=ttyS0,115 200 single noapic boot Booting 'hda1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=tty S0,115200 single noapic' malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.20.1 pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hda1:/boot/vmlinuz-2.6.20.1 root=/dev/sda1 ro console=tty0 console=tty S0,115200 single noapic' malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 472 bytes (5 blocks), free: 15904 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.20.1 pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 456 bytes (4 blocks), free: 15920 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) root (hd0,0) kernel /boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=tty0 co nsole=ttyS0,115200 noapic initrd /boot/initrd.img-2.6.15-23-amd64-generic boot Booting 'hda1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=t ty0 console=ttyS0,115200 noapic initrd=/boot/initrd.img-2.6.15-23-amd64-generic ' malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.15-23-amd64-generic pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hda1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=t ty0 console=ttyS0,115200 noapic initrd=/boot/initrd.img-2.6.15-23-amd64-generic ' malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) malloc_diag: alloc: 528 bytes (5 blocks), free: 15848 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.15-23-amd64-generic pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 512 bytes (4 blocks), free: 15864 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) root (hd0,0) kernel /boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=tty0 co nsole=ttyS0,115200 single noapic initrd /boot/initrd.img-2.6.15-23-amd64-generic boot Booting 'hda1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=t ty0 console=ttyS0,115200 single noapic initrd=/boot/initrd.img-2.6.15-23-amd64- generic' malloc_diag: alloc: 520 bytes (4 blocks), free: 15856 bytes (1 blocks) malloc_diag: alloc: 536 bytes (5 blocks), free: 15840 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.15-23-amd64-generic pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 520 bytes (4 blocks), free: 15856 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hda1:/boot/vmlinuz-2.6.15-23-amd64-generic root=/dev/sda1 ro console=t ty0 console=ttyS0,115200 single noapic initrd=/boot/initrd.img-2.6.15-23-amd64- generic' malloc_diag: alloc: 520 bytes (4 blocks), free: 15856 bytes (1 blocks) malloc_diag: alloc: 536 bytes (5 blocks), free: 15840 bytes (1 blocks) file_open: dev=hda1, path=/boot/vmlinuz-2.6.15-23-amd64-generic pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 520 bytes (4 blocks), free: 15856 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) root (hd0,0) kernel /boot/memtest86+.bin boot Booting 'hda1:/boot/memtest86+.bin ' malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks) malloc_diag: alloc: 408 bytes (5 blocks), free: 15968 bytes (1 blocks) file_open: dev=hda1, path=/boot/memtest86+.bin pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hda1:/boot/memtest86+.bin ' malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks) malloc_diag: alloc: 408 bytes (5 blocks), free: 15968 bytes (1 blocks) file_open: dev=hda1, path=/boot/memtest86+.bin pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Booting 'hda1:/boot/memtest86+.bin ' malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks) malloc_diag: alloc: 408 bytes (5 blocks), free: 15968 bytes (1 blocks) file_open: dev=hda1, path=/boot/memtest86+.bin pio_packet: no drq after sending packet print_status: IDE: status=0x51, err=0x20 atapi_request_sense: 70 00 02 00 00 00 00 0e 00 00 00 00 3a 00 00 00 00 00 atapi_detect_medium: Device reports MEDIUM NOT PRESENT Media detection failed devopen: failed to open ide malloc_diag: alloc: 392 bytes (4 blocks), free: 15984 bytes (1 blocks) malloc_diag: alloc: 352 bytes (3 blocks), free: 16024 bytes (1 blocks) Ubuntu LB, kernel 2.6.21-rc3 Error 27: Unrecognized command Press any key to continue...