flashrom v0.9.9-r1954 on Linux 4.12.0-1-amd64 (x86_64) flashrom is free software, get the source code at https://flashrom.org flashrom was built with libpci 3.5.2, GCC 6.3.0 20170221, little endian Command line (7 args): flashrom -VVV -p internal -c SST25VF032B -w build/coreboot.rom Calibrating delay loop... OS timer resolution is 1 usecs, 3887M loops per second, 10 myus = 10 us, 100 myus = 139 us, 1000 myus = 1016 us, 10000 myus = 10009 us, 4 myus = 13 us, OK. Initializing internal programmer Found candidate at: 00000500-00000510 Found coreboot table at 0x00000500. Found candidate at: 00000000-00000908 Found coreboot table at 0x00000000. coreboot table found at 0x7fedd000. coreboot header(24) checksum: fa8a table(2312) checksum: 6aa1 entries: 30 Vendor ID: Sapphire, part ID: Pure Platinum H61 Using Internal DMI decoder. page_size=1000 pre-rounding: start=0x00000000000f0000, len=0x10000, end=0x0000000000100000 post-rounding: start=0x00000000000f0000, len=0x10000, end=0x0000000000100000 page_size=1000 pre-rounding: start=0x000000007fea7020, len=0x212, end=0x000000007fea7232 post-rounding: start=0x000000007fea7000, len=0x1000, end=0x000000007fea8000 DMI string chassis-type: "Desktop" page_size=1000 pre-rounding: start=0x00007efcba635020, len=0x212, end=0x00007efcba635232 post-rounding: start=0x00007efcba635000, len=0x1000, end=0x00007efcba636000 page_size=1000 pre-rounding: start=0x00007efcba636000, len=0x10000, end=0x00007efcba646000 post-rounding: start=0x00007efcba636000, len=0x10000, end=0x00007efcba646000 DMI string system-manufacturer: "Sapphire" DMI string system-product-name: "Pure Platinum H61" DMI string system-version: "1.0" DMI string baseboard-manufacturer: "Sapphire" DMI string baseboard-product-name: "Pure Platinum H61" DMI string baseboard-version: "1.0" Found chipset "Intel H61" with PCI ID 8086:1c5c. Enabling flash write... Root Complex Register Block address = 0xfed1c000 page_size=1000 pre-rounding: start=0x00000000fed1c000, len=0x4000, end=0x00000000fed20000 post-rounding: start=0x00000000fed1c000, len=0x4000, end=0x00000000fed20000 GCS = 0xc21: BIOS Interface Lock-Down: enabled, Boot BIOS Straps: 0x3 (SPI) Top Swap: enabled (A16(+) inverted) 0xfff80000/0xffb80000 FWH IDSEL: 0x0 0xfff00000/0xffb00000 FWH IDSEL: 0x0 0xffe80000/0xffa80000 FWH IDSEL: 0x1 0xffe00000/0xffa00000 FWH IDSEL: 0x1 0xffd80000/0xff980000 FWH IDSEL: 0x2 0xffd00000/0xff900000 FWH IDSEL: 0x2 0xffc80000/0xff880000 FWH IDSEL: 0x3 0xffc00000/0xff800000 FWH IDSEL: 0x3 0xff700000/0xff300000 FWH IDSEL: 0x4 0xff600000/0xff200000 FWH IDSEL: 0x5 0xff500000/0xff100000 FWH IDSEL: 0x6 0xff400000/0xff000000 FWH IDSEL: 0x7 0xfff80000/0xffb80000 FWH decode enabled 0xfff00000/0xffb00000 FWH decode enabled 0xffe80000/0xffa80000 FWH decode enabled 0xffe00000/0xffa00000 FWH decode enabled 0xffd80000/0xff980000 FWH decode enabled 0xffd00000/0xff900000 FWH decode enabled 0xffc80000/0xff880000 FWH decode enabled 0xffc00000/0xff800000 FWH decode enabled 0xff700000/0xff300000 FWH decode enabled 0xff600000/0xff200000 FWH decode enabled 0xff500000/0xff100000 FWH decode enabled 0xff400000/0xff000000 FWH decode enabled Maximum FWH chip size: 0x100000 bytes SPI Read Configuration: prefetching enabled, caching enabled, BIOS_CNTL = 0x09: BIOS Lock Enable: disabled, BIOS Write Enable: enabled SPIBAR = 0x00007efcba642000 + 0x3800 0x04: 0xc008 (HSFS) HSFS: FDONE=0, FCERR=0, AEL=0, BERASE=1, SCIP=0, FDOPSS=0, FDV=1, FLOCKDN=1 Warning: SPI Configuration Lockdown activated. The Flash Descriptor Override Strap-Pin is set. Restrictions implied by the Master Section of the flash descriptor are NOT in effect. Please note that Protected Range (PR) restrictions still apply. Reading OPCODES... done OP Type Pre-OP op[0]: 0x01, write w/o addr, none op[1]: 0x02, write w/ addr, none op[2]: 0x03, read w/ addr, none op[3]: 0x05, read w/o addr, none op[4]: 0x20, write w/ addr, none op[5]: 0x9f, read w/o addr, none op[6]: 0xd8, write w/ addr, none op[7]: 0x0b, read w/ addr, none Pre-OP 0: 0x06, Pre-OP 1: 0x50 0x06: 0x0000 (HSFC) HSFC: FGO=0, FCYCLE=0, FDBC=0, SME=0 0x08: 0x00000000 (FADDR) 0x50: 0x0000ffff (FRAP) BMWAG 0x00, BMRAG 0x00, BRWA 0xff, BRRA 0xff 0x54: 0x00000000 FREG0: Flash Descriptor region (0x00000000-0x00000fff) is read-write. 0x58: 0x03ff0018 FREG1: BIOS region (0x00018000-0x003fffff) is read-write. 0x5C: 0x00170001 FREG2: Management Engine region (0x00001000-0x00017fff) is read-write. 0x60: 0x00001fff FREG3: Gigabit Ethernet region is unused. 0x64: 0x00001fff FREG4: Platform Data region is unused. 0x74: 0x00000000 (PR0 is unused) 0x78: 0x00000000 (PR1 is unused) 0x7C: 0x00000000 (PR2 is unused) 0x80: 0x00000000 (PR3 is unused) 0x84: 0x00000000 (PR4 is unused) 0x90: 0x80 (SSFS) SSFS: SCIP=0, FDONE=0, FCERR=0, AEL=0 0x91: 0xf94400 (SSFC) SSFC: SCGO=0, ACS=0, SPOP=0, COP=0, DBC=4, SME=0, SCF=1 0x94: 0x5006 (PREOP) 0x96: 0xb32d (OPTYPE) 0x98: 0x05030201 (OPMENU) RDSR READ BYPR WRSR 0x9C: 0x0bd89f20 (OPMENU+4) FAST BED8 RDID BE20 0xA0: 0x00000000 (BBAR) 0xC4: 0x00802009 (LVSCC) LVSCC: BES=0x1, WG=0, WSR=1, WEWS=0, EO=0x20, VCL=1 0xC8: 0x00002009 (UVSCC) UVSCC: BES=0x1, WG=0, WSR=1, WEWS=0, EO=0x20 0xD0: 0x00000000 (FPB) Reading flash descriptors mapped by the chipset via FDOC/FDOD... done. === Content Section === FLVALSIG 0x0ff0a55a FLMAP0 0x02040003 FLMAP1 0x12100206 FLMAP2 0x00210120 --- Details --- NR (Number of Regions): 3 FRBA (Flash Region Base Address): 0x040 NC (Number of Components): 1 FCBA (Flash Component Base Address): 0x030 ISL (ICH/PCH Strap Length): 18 FISBA/FPSBA (Flash ICH/PCH Strap Base Address): 0x100 NM (Number of Masters): 3 FMBA (Flash Master Base Address): 0x060 MSL/PSL (MCH/PROC Strap Length): 1 FMSBA (Flash MCH/PROC Strap Base Address): 0x200 === Component Section === FLCOMP 0x09300023 FLILL 0x00000000 --- Details --- Component 1 density: 4 MB Component 2 is not used. Read Clock Frequency: 20 MHz Read ID and Status Clock Freq.: 33 MHz Write and Erase Clock Freq.: 33 MHz Fast Read is supported. Fast Read Clock Frequency: 33 MHz No forbidden opcodes. === Region Section === FLREG0 0x00000000 FLREG1 0x03ff0018 FLREG2 0x00170001 FLREG3 0x00001fff FLREG4 0x00001fff --- Details --- Region 0 (Descr.) 0x00000000 - 0x00000fff Region 1 (BIOS ) 0x00018000 - 0x003fffff Region 2 (ME ) 0x00001000 - 0x00017fff Region 3 (GbE ) is unused. Region 4 (Platf.) is unused. === Master Section === FLMSTR1 0xffff0000 FLMSTR2 0xffff0000 FLMSTR3 0x08080118 --- Details --- Descr. BIOS ME GbE Platf. BIOS rw rw rw rw rw ME rw rw rw rw rw GbE rw checking for opcode 0x03 checking for opcode 0x05 OK. No board enable found matching coreboot IDs vendor="Sapphire", model="Pure Platinum H61". The following protocols are supported: FWH, SPI. Probing for SST SST25VF032B, 4096 kB: page_size=1000 pre-rounding: start=0x00000000ffc00000, len=0x400000, end=0x0000000100000000 post-rounding: start=0x00000000ffc00000, len=0x400000, end=0x0000000100000000 programmer_map_flash_region: mapping SST25VF032B from 0x00000000ffc00000 to 0x00007efcb8bdf000 RDID returned 0xbf 0x25 0x4a. probe_spi_rdid_generic: id1 0xbf, id2 0x254a Found SST flash chip "SST25VF032B" (4096 kB, SPI) mapped at physical address 0x00000000ffc00000. Chip status register is 0x02. Chip status register: Block Protect Write Disable (BPL) is not set Chip status register: Auto Address Increment Programming (AAI) is not set Chip status register: Block Protect 3 (BP3) is not set Chip status register: Block Protect 2 (BP2) is not set Chip status register: Block Protect 1 (BP1) is not set Chip status register: Block Protect 0 (BP0) is not set Chip status register: Write Enable Latch (WEL) is set Chip status register: Write In Progress (WIP/BUSY) is not set page_size=1000 pre-rounding: start=0x00007efcb8bdf000, len=0x400000, end=0x00007efcb8fdf000 post-rounding: start=0x00007efcb8bdf000, len=0x400000, end=0x00007efcb8fdf000 programmer_unmap_flash_region: unmapped 0x00007efcb8bdf000 page_size=1000 pre-rounding: start=0x00000000ffc00000, len=0x400000, end=0x0000000100000000 post-rounding: start=0x00000000ffc00000, len=0x400000, end=0x0000000100000000 programmer_map_flash_region: mapping SST25VF032B from 0x00000000ffc00000 to 0x00007efcb8bdf000 Block protection is disabled. coreboot last image size (not ROM size) is 4194304 bytes. Manufacturer: Sapphire Mainboard ID: Pure Platinum H61 This coreboot image matches this mainboard. Reading old flash chip contents... done. Erasing and writing flash chip... Trying erase function 0... 0x000000-0x000fff:EWInvalid OPCODE 0x06, will not execute. default_spi_write_aai failed during start command execution: -2 Invalid OPCODE 0x04, will not execute. default_spi_write_aai failed to disable AAI mode. Reading current flash chip contents... done. Looking for another erase function. Trying erase function 1... 0x000000-0x007fff:WInvalid OPCODE 0x06, will not execute. default_spi_write_aai failed during start command execution: -2 Invalid OPCODE 0x04, will not execute. default_spi_write_aai failed to disable AAI mode. Reading current flash chip contents... done. Looking for another erase function. Trying erase function 2... 0x000000-0x00ffff:WInvalid OPCODE 0x06, will not execute. default_spi_write_aai failed during start command execution: -2 Invalid OPCODE 0x04, will not execute. default_spi_write_aai failed to disable AAI mode. Reading current flash chip contents... done. Looking for another erase function. Trying erase function 3... 0x000000-0x3fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_60 failed during command execution Reading current flash chip contents... done. Looking for another erase function. Trying erase function 4... 0x000000-0x3fffff:EInvalid OPCODE 0x06, will not execute. spi_chip_erase_c7 failed during command execution Looking for another erase function. No usable erase functions left. FAILED! Uh oh. Erase/write failed. Checking if anything has changed. Reading current flash chip contents... done. Apparently at least some data has changed. Your flash chip is in an unknown state. Get help on IRC at chat.freenode.net (channel #flashrom) or mail flashrom@flashrom.org with the subject "FAILED: "! ------------------------------------------------------------------------------- DO NOT REBOOT OR POWEROFF! page_size=1000 pre-rounding: start=0x00007efcb8bdf000, len=0x400000, end=0x00007efcb8fdf000 post-rounding: start=0x00007efcb8bdf000, len=0x400000, end=0x00007efcb8fdf000 programmer_unmap_flash_region: unmapped 0x00007efcb8bdf000 Restoring MMIO space at 0x7efcba6458a0