Hi,

as I currently have a D16 right next to me, I thought I'd just test it,
too. This is with coreboot-4.8-660-gb1d26f0e92. S3 seems to be working
somehow, but I have to press the power button to make it resume - it
doesn't react on (USB keyboard) key presses. Also it takes about one
minute to resume, with 8x 8GB RAM, single CPU.

Just in case it helps somehow...

See the attached coreboot log.

And BTW, yes, the D16 has a serial port exposed at the rear panel.

Kind Regards,

Merlin


defconfig:

CONFIG_USE_OPTION_TABLE=y
CONFIG_VENDOR_ASUS=y
CONFIG_BOARD_ASUS_KGPE_D16=y
CONFIG_COREBOOT_ROMSIZE_KB_16384=y
CONFIG_PAYLOAD_GRUB2=y
CONFIG_GRUB2_EXTRA_MODULES="cat"
CONFIG_GRUB2_INCLUDE_RUNTIME_CONFIG_FILE=y
CONFIG_COREINFO_SECONDARY_PAYLOAD=y
CONFIG_MEMTEST_SECONDARY_PAYLOAD=y
CONFIG_NVRAMCUI_SECONDARY_PAYLOAD=y





On Mon, 10 Dec 2018 13:32:04 +0000
petecb via coreboot <coreboot@coreboot.org> wrote:

> Hi,
>
> I have not been able to get S3 suspend to work with this board when
> using Qubes 4. It's running coreboot v4.6 with the default CMOS
> options. It appears to go into suspend ok but when I try to resume
> the system does not respond to keyboard or mouse input and pressing
> the powerbutton results in what appears to be a fresh cold-boot.
>
> Does anyone know whether there is a specific coreboot/cmos option I
> could be missing or if it is a Qubes configuration issue?
>
> Kind regards,
>
> Pete


--
Merlin Büge
--
coreboot mailing list: coreboot@coreboot.org
https://mail.coreboot.org/mailman/listinfo/coreboot