On 5/3/07, Uwe Hermann <
uwe@hermann-uwe.de> wrote:
Hi!
On Tue, May 01, 2007 at 10:20:54AM +0200, popkonserve wrote:
> i didn't took a deep look into the api yet. so i still have a lot of
> questions: where should i start?
Here:
http://linuxbios.org/Development_Guidelines
Thx for the link ;-). I'm trying to add support for VIA693A (legacy chipset ;-) in the near future.
> Chipsets and CPUs or rather some SuperIO stuff?
Super I/O will give you immediate results (you see serial output), so
they're a good start.
> and what i really need to know is: where is the
> configuration done? let's say ram timings (no spd on edo/fpm), superIO
> settings, etc. (there are a lot other chipset tweaks that could be applied).
Depends. RAM init is done in src/northbridge/VENDOR/DEVICE/raminit.c,
Super I/O init is in src/superio/VENDOR/DEVICE/* etc.
Is this directory structure applies for both version 1 and 2 ?