Hi,
here is the irq_tables.c ( thx to getpir):
/*
* This file is part of the coreboot project.
*
* Copyright (C) 200x TODO <TODO@TODO>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifdef GETPIR /* TODO: Drop this when copying to coreboot. */
#include "pirq_routing.h" /* TODO: Drop this when copying to coreboot. */
#else /* TODO: Drop this when copying to coreboot. */
#include <arch/pirq_routing.h>
#endif /* TODO: Drop this when copying to coreboot. */
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
32 + 16 * 14, /* Max. number of devices on the bus */
0x00, /* Interrupt router bus */
(0x1f << 3) | 0x0, /* Interrupt router dev */
0, /* IRQs devoted exclusively to PCI usage */
0x8086, /* Vendor */
0x27b0, /* Device */
0, /* Miniport */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
0xb, /* Checksum (has to be set to some value that
* would give 0 after the sum of all bytes
* for this structure (including checksum).
*/
{
/* bus, dev | fn, {link, bitmap}, {link, bitmap}, {link, bitmap}, {link, bitmap}, slot, rfu */
{0x00, (0x01 << 3) | 0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcf8}}, 0x0, 0x0},
{0x00, (0x02 << 3) | 0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
{0x00, (0x1e << 3) | 0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
{0x00, (0x1f << 3) | 0x0, {{0x62, 0xdcf8}, {0x63, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
{0x00, (0x1d << 3) | 0x0, {{0x6b, 0xdcf8}, {0x63, 0xdcf8}, {0x62, 0xdcf8}, {0x60, 0xdcf8}}, 0x0, 0x0},
{0x00, (0x1b << 3) | 0x0, {{0x60, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
{0x00, (0x1c << 3) | 0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcf8}}, 0x0, 0x0},
{0x02, (0x00 << 3) | 0x0, {{0x60, 0xdcf8}, {0x61, 0xdcf8}, {0x62, 0xdcf8}, {0x63, 0xdcf8}}, 0x20, 0x0},
{0x03, (0x03 << 3) | 0x0, {{0x63, 0xdcf8}, {0x62, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}}, 0x4, 0x0},
{0x03, (0x04 << 3) | 0x0, {{0x62, 0xdcf8}, {0x6b, 0xdcf8}, {0x60, 0xdcf8}, {0x68, 0xdcf8}}, 0x5, 0x0},
{0x03, (0x05 << 3) | 0x0, {{0x61, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}}, 0x6, 0x0},
{0x03, (0x01 << 3) | 0x0, {{0x62, 0xdcf8}, {0x63, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}}, 0x1, 0x0},
{0x03, (0x02 << 3) | 0x0, {{0x63, 0xdcf8}, {0x68, 0xdcf8}, {0x69, 0xdcf8}, {0x6a, 0xdcf8}}, 0x2, 0x0},
{0x03, (0x08 << 3) | 0x0, {{0x68, 0xdcf8}, {0x00, 0x0000}, {0x00, 0x0000}, {0x00, 0x0000}}, 0x0, 0x0},
}
};
unsigned long write_pirq_routing_table(unsigned long addr)
{
return copy_pirq_routing_table(addr);
}
/* end irq_tables.c */
---- Message d'origine ----
Objet : [coreboot] Will coreboot work on 945G-M4 (NEC) // ECS 945G-NM uATX Motherboard
Date : 22/12/2012 17:53:33 CET
Hi,
I have a PowerMate ML450 Micro Tower (NEC : http://www.nec-computers.com/support2/pib.asp?mode=default&platform=platform_veracruz_mt ) and I would like to know if coreboot work on it.
the motherboard is also called ECS 945G-NM uATX ( http://support.gateway.com/s//MOTHERBD/Shared/4006244R/4006244Rnv.shtml )
lspci -tvnn gives me:
# lspci -tvnn
-[0000:00]-+-00.0 Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770]
+-01.0-[01]--+-00.0 Advanced Micro Devices [AMD] nee ATI RV370 5B60 [Radeon X300 (PCIE)] [1002:5b60]
| \-00.1 Advanced Micro Devices [AMD] nee ATI RV370 [Radeon X300SE] [1002:5b70]
+-1c.0-[02]----00.0 Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168]
+-1d.0 Intel Corporation NM10/ICH7 Family USB UHCI Controller #1 [8086:27c8]
+-1d.1 Intel Corporation NM10/ICH7 Family USB UHCI Controller #2 [8086:27c9]
+-1d.2 Intel Corporation NM10/ICH7 Family USB UHCI Controller #3 [8086:27ca]
+-1d.3 Intel Corporation NM10/ICH7 Family USB UHCI Controller #4 [8086:27cb]
+-1d.7 Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc]
+-1e.0-[03]----02.0 Philips Semiconductors SAA7146 [1131:7146]
+-1e.2 Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller [8086:27de]
+-1f.0 Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8]
+-1f.1 Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df]
+-1f.2 Intel Corporation NM10/ICH7 Family SATA Controller [IDE mode] [8086:27c0]
\-1f.3 Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da]
and here is flashrom -V --programmer internal :
# flashrom -V --programmer internal
flashrom v0.9.6.1-r1564 on Linux 3.7.1-gentoo (x86_64)
flashrom is free software, get the source code at http://www.flashrom.org
flashrom was built with libpci 3.1.10, GCC 4.7.2, little endian
Command line (3 args): flashrom -V --programmer internal
Calibrating delay loop... OS timer resolution is 1 usecs, 2247M loops per second, 10 myus = 12 us, 100 myus = 100 us, 1000 myus = 1001 us, 10000 myus = 9991 us, 4 myus = 5 us, OK.
Initializing internal programmer
No coreboot table found.
DMI string system-manufacturer: "NEC COMPUTERS INTERNATIONAL"
DMI string system-product-name: "ECS-945G"
DMI string system-version: "1.0"
DMI string baseboard-manufacturer: "NEC COMPUTERS INTERNATIONAL"
DMI string baseboard-product-name: "ECS-945G"
DMI string baseboard-version: "1.0"
DMI string chassis-type: "Desktop"
Found Winbond Super I/O, id 88
Found chipset "Intel ICH7/ICH7R" with PCI ID 8086:27b8. Enabling flash write...
0xfff80000/0xffb80000 FWH IDSEL: 0x0
0xfff00000/0xffb00000 FWH IDSEL: 0x0
0xffe80000/0xffa80000 FWH IDSEL: 0x1
0xffe00000/0xffa00000 FWH IDSEL: 0x1
0xffd80000/0xff980000 FWH IDSEL: 0x2
0xffd00000/0xff900000 FWH IDSEL: 0x2
0xffc80000/0xff880000 FWH IDSEL: 0x3
0xffc00000/0xff800000 FWH IDSEL: 0x3
0xff700000/0xff300000 FWH IDSEL: 0x4
0xff600000/0xff200000 FWH IDSEL: 0x5
0xff500000/0xff100000 FWH IDSEL: 0x6
0xff400000/0xff000000 FWH IDSEL: 0x7
0xfff80000/0xffb80000 FWH decode enabled
0xfff00000/0xffb00000 FWH decode disabled
0xffe80000/0xffa80000 FWH decode disabled
0xffe00000/0xffa00000 FWH decode disabled
0xffd80000/0xff980000 FWH decode disabled
0xffd00000/0xff900000 FWH decode disabled
0xffc80000/0xff880000 FWH decode disabled
0xffc00000/0xff800000 FWH decode disabled
0xff700000/0xff300000 FWH decode disabled
0xff600000/0xff200000 FWH decode disabled
0xff500000/0xff100000 FWH decode disabled
0xff400000/0xff000000 FWH decode disabled
Maximum FWH chip size: 0x80000 bytes
BIOS Lock Enable: disabled, BIOS Write Enable: disabled, BIOS_CNTL is 0x0
Root Complex Register Block address = 0xfed1c000
GCS = 0x220c64: BIOS Interface Lock-Down: disabled, Boot BIOS Straps: 0x3 (LPC)
Top Swap : not enabled
OK.
The following protocols are supported: FWH.
Probing for Atmel AT49LH002, 256 kB: probe_82802ab: id1 0x56, id2 0xde, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AB, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Intel 82802AC, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for PMC Pm49FL002, 256 kB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for PMC Pm49FL004, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Sharp LHF00L04, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF002A/B, 256 kB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF003A/B, 384 kB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for SST SST49LF004A/B, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60
Found SST flash chip "SST49LF004A/B" (512 kB, FWH) at physical address 0xfff80000.
Lock status for 0x000000 (size 0x010000) is 00, full access
Lock status for 0x010000 (size 0x010000) is 00, full access
Lock status for 0x020000 (size 0x010000) is 00, full access
Lock status for 0x030000 (size 0x010000) is 00, full access
Lock status for 0x040000 (size 0x010000) is 00, full access
Lock status for 0x050000 (size 0x010000) is 00, full access
Lock status for 0x060000 (size 0x010000) is 00, full access
Lock status for 0x070000 (size 0x010000) is 00, full access
Probing for SST SST49LF004C, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008A, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF008C, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for SST SST49LF016C, 2048 kB: Chip size 2048 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040A, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW040B, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080A, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FLW080B, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW002, 256 kB: probe_82802ab: id1 0x56, id2 0xde, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW016, 2048 kB: Chip size 2048 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW040, 512 kB: probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for ST M50FW080, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_82802ab: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V040FA, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V040FB, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V040FC, 512 kB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W49V002FA, 256 kB: probe_jedec_common: id1 0xbf, id2 0x60
Probing for Winbond W39V080FA, 1024 kB: Chip size 1024 kB is bigger than supported size 512 kB of chipset/board/programmer for FWH interface, probe/read/erase/write may fail. probe_jedec_common: id1 0xff, id2 0xff, id1 parity violation, id1 is normal flash content, id2 is normal flash content
Probing for Winbond W39V080FA (dual mode), 512 kB: probe_jedec_common: id1 0xbf, id2 0x60
Found SST flash chip "SST49LF004A/B" (512 kB, FWH).
No operations were specified.
Restoring PCI config space for 00:1f:0 reg 0xdc
and here is what dmidecode gives me:
# dmidecode 2.11
SMBIOS 2.3 present.
50 structures occupying 1880 bytes.
Table at 0x000FC310.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: American Megatrends Inc.
Version: 080013
Release Date: 11/08/2006
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 512 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 kB floppy services are supported (int 13h)
3.5"/2.88 MB floppy services are supported (int 13h)
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
LS-120 boot is supported
ATAPI Zip drive boot is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
BIOS Revision: 8.13
Handle 0x0001, DMI type 1, 27 bytes
System Information
Manufacturer: NEC COMPUTERS INTERNATIONAL
Product Name: ECS-945G
Version: 1.0
Serial Number:
UUID: 00020003-0004-0005-0006-000700080009
Wake-up Type: Power Switch
SKU Number: To Be Filled By O.E.M.
Family: To Be Filled By O.E.M.
Handle 0x0002, DMI type 2, 15 bytes
Base Board Information
Manufacturer: NEC COMPUTERS INTERNATIONAL
Product Name: ECS-945G
Version: 1.0
Serial Number:
Asset Tag: To Be Filled By O.E.M.
Features:
Board is a hosting board
Board is replaceable
Location In Chassis: To Be Filled By O.E.M.
Chassis Handle: 0x0003
Type: Motherboard
Contained Object Handles: 0
Handle 0x0003, DMI type 3, 21 bytes
Chassis Information
Manufacturer: To Be Filled By O.E.M.
Type: Desktop
Lock: Not Present
Version: To Be Filled By O.E.M.
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: None
OEM Information: 0x00000000
Height: Unspecified
Number Of Power Cords: 1
Contained Elements: 0
Handle 0x0004, DMI type 4, 35 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Unknown
Manufacturer: Intel
ID: 65 0F 00 00 FF FB EB BF
Signature: Type 0, Family 15, Model 6, Stepping 5
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Pentium(R) D CPU 3.40GHz
Voltage: 1.3 V
External Clock: 200 MHz
Max Speed: 3400 MHz
Current Speed: 3400 MHz
Status: Populated, Enabled
Upgrade: Other
L1 Cache Handle: 0x0005
L2 Cache Handle: 0x0006
L3 Cache Handle: 0x0007
Serial Number: To Be Filled By O.E.M.
Asset Tag: To Be Filled By O.E.M.
Part Number: To Be Filled By O.E.M.
Handle 0x0005, DMI type 7, 19 bytes
Cache Information
Socket Designation: L1-Cache
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 32 kB
Maximum Size: 32 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Parity
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0006, DMI type 7, 19 bytes
Cache Information
Socket Designation: L2-Cache
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 4096 kB
Maximum Size: 4096 kB
Supported SRAM Types:
Other
Installed SRAM Type: Other
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0007, DMI type 7, 19 bytes
Cache Information
Socket Designation: L3-Cache
Configuration: Disabled, Not Socketed, Level 3
Operational Mode: Unknown
Location: Internal
Installed Size: 0 kB
Maximum Size: 0 kB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Unknown
System Type: Unknown
Associativity: Unknown
Handle 0x0008, DMI type 5, 24 bytes
Memory Controller Information
Error Detecting Method: 64-bit ECC
Error Correcting Capabilities:
None
Supported Interleave: One-way Interleave
Current Interleave: One-way Interleave
Maximum Memory Module Size: 4096 MB
Maximum Total Memory Size: 16384 MB
Supported Speeds:
Other
Supported Memory Types:
DIMM
SDRAM
Memory Module Voltage: 3.3 V
Associated Memory Slots: 4
0x0009
0x000A
0x000B
0x000C
Enabled Error Correcting Capabilities:
None
Handle 0x0009, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM0
Bank Connections: 0 1
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK
Handle 0x000A, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM1
Bank Connections: 2 3
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK
Handle 0x000B, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM2
Bank Connections: 4 5
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK
Handle 0x000C, DMI type 6, 12 bytes
Memory Module Information
Socket Designation: DIMM3
Bank Connections: 6 7
Current Speed: Unknown
Type: DIMM SDRAM
Installed Size: 512 MB (Single-bank Connection)
Enabled Size: 512 MB (Single-bank Connection)
Error Status: OK
Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: PS2Mouse
External Connector Type: PS/2
Port Type: Mouse Port
Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1A1
Internal Connector Type: None
External Reference Designator: Keyboard
External Connector Type: PS/2
Port Type: Keyboard Port
Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB1
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2A2
Internal Connector Type: None
External Reference Designator: USB2
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4A1
Internal Connector Type: None
External Reference Designator: LPT 1
External Connector Type: DB-25 male
Port Type: Parallel Port ECP/EPP
Handle 0x0012, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6B1 - AUX IN
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0013, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6B2 - CDIN
Internal Connector Type: On Board Sound Input From CD-ROM
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Audio Port
Handle 0x0014, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6J2 - PRI IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0015, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6J1 - SEC IDE
Internal Connector Type: On Board IDE
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0016, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J4J1 - FLOPPY
Internal Connector Type: On Board Floppy
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0017, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9H1 - FRONT PNL
Internal Connector Type: 9 Pin Dual Inline (pin 10 cut)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0018, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J1B1 - CHASSIS REAR FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x0019, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J2F1 - CPU FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J8B4 - FRONT FAN
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G2 - FNT USB
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J6C3 - FP AUD
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: J9G1 - CONFIG
Internal Connector Type: Other
External Reference Designator: Not Specified
External Connector Type: None
Port Type: Other
Handle 0x001E, DMI type 9, 13 bytes
System Slot Information
Designation: AGP
Type: 32-bit AGP 4x
Current Usage: Available
Length: Short
ID: 0
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x001F, DMI type 9, 13 bytes
System Slot Information
Designation: PCI1
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 1
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0020, DMI type 9, 13 bytes
System Slot Information
Designation: PCI2
Type: 32-bit PCI
Current Usage: In Use
Length: Short
ID: 2
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0021, DMI type 9, 13 bytes
System Slot Information
Designation: PCI3
Type: 32-bit PCI
Current Usage: Available
Length: Short
ID: 3
Characteristics:
3.3 V is provided
Opening is shared
PME signal is supported
Handle 0x0022, DMI type 10, 6 bytes
On Board Device Information
Type: Video
Status: Enabled
Description: To Be Filled By O.E.M.
Handle 0x0023, DMI type 10, 6 bytes
On Board Device Information
Type: SCSI Controller
Status: Disabled
Description: To Be Filled By O.E.M.
Handle 0x0024, DMI type 10, 6 bytes
On Board Device Information
Type: Ethernet
Status: Enabled
Description: To Be Filled By O.E.M.
Handle 0x0025, DMI type 13, 22 bytes
BIOS Language Information
Language Description Format: Abbreviated
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x0026, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: None
Maximum Capacity: 4 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x0027, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0007FFFFFFF
Range Size: 2 GB
Physical Array Handle: 0x0026
Partition Width: 4
Handle 0x0028, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: DIMM0
Bank Locator: BANK0
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer0
Serial Number: SerNum0
Asset Tag: AssetTagNum0
Part Number: PartNum0
Handle 0x0029, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x0001FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x0028
Memory Array Mapped Address Handle: 0x0027
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x002A, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: DIMM1
Bank Locator: BANK1
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer1
Serial Number: SerNum1
Asset Tag: AssetTagNum1
Part Number: PartNum1
Handle 0x002B, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00020000000
Ending Address: 0x0003FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002A
Memory Array Mapped Address Handle: 0x0027
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x002C, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: DIMM2
Bank Locator: BANK2
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer2
Serial Number: SerNum2
Asset Tag: AssetTagNum2
Part Number: PartNum2
Handle 0x002D, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00040000000
Ending Address: 0x0005FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002C
Memory Array Mapped Address Handle: 0x0027
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x002E, DMI type 17, 27 bytes
Memory Device
Array Handle: 0x0026
Error Information Handle: Not Provided
Total Width: 64 bits
Data Width: 64 bits
Size: 512 MB
Form Factor: DIMM
Set: None
Locator: DIMM3
Bank Locator: BANK3
Type: SDRAM
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Manufacturer3
Serial Number: SerNum3
Asset Tag: AssetTagNum3
Part Number: PartNum3
Handle 0x002F, DMI type 20, 19 bytes
Memory Device Mapped Address
Starting Address: 0x00060000000
Ending Address: 0x0007FFFFFFF
Range Size: 512 MB
Physical Device Handle: 0x002E
Memory Array Mapped Address Handle: 0x0027
Partition Row Position: 1
Interleaved Data Depth: 1
Handle 0x0030, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Handle 0x0031, DMI type 127, 4 bytes
End Of Table
Thank you and Best Regards