you are right.
1. download image to burner buffer, NON USB need to 5s..., USB may only need 1s. 2. issue command to burn from buffer to flash. .... burner need 30s, flash_rom need 10s.
On 8/12/05, Richard Smith firstname.lastname@example.org wrote:
On 8/12/05, yhlu email@example.com wrote:
I hope I could get one with USB2 cable and it could work with Linux.
USB2 would be faster than others.
I don't think it matters. Your bottleneck is not the bandwith to the programmer but the time it takes for the flash part to write a byte or block. Flash writes are slow.
-- Richard A. Smith