Dear Naresh, please check the attached archive for these files (and
tell if there's anything else I need to show)

On Thu, Nov 5, 2020 at 8:08 PM Naresh G. Solanki
<naresh.solanki.2011@gmail.com> wrote:
>
> Can you give following output with coreboot and OEM bios.
> lspci -vvvk
> dmesg
> cat /proc/interrupt
>
>
> On Thu, 5 Nov, 2020, 6:29 pm Mike Banon, <mikebdp2@gmail.com> wrote:
>>
>> Still need your help, friend
>>
>> On Sat, Oct 24, 2020 at 11:15 AM Mike Banon <mikebdp2@gmail.com> wrote:
>> >
>> > Although I found this article
>> > https://www.coreboot.org/Creating_Valid_IRQ_Tables , I'm not sure if
>> > it applies to mainboard_picr_data/_intr_data : considering a problem
>> > from my previous msg - where a copy-paste of old picr/intr data
>> > structures gave the bad results. Could you please clarify if this
>> > article is still valid for these new data structures? If not, how to
>> > get the correct values for mainboard_picr_data/_intr_data using Linux?
>> >
>> >
>> > On Tue, Oct 20, 2020 at 6:23 PM Mike Banon <mikebdp2@gmail.com> wrote:
>> > >
>> > > Dear friends, I'm trying to properly program the IRQ tables for Lenovo
>> > > G505S, because the old IRQ routing is bad and doesn't work for a
>> > > simple OS like Kolibri. Full details are in the comments under this
>> > > change:
>> > >
>> > > https://review.coreboot.org/c/coreboot/+/46587/
>> > >
>> > > When I used the old picr_data/intr_data values of G505S for the new
>> > > structures, I got only 1 IRQ working. However, with a copy-paste of
>> > > AM1I-A - surprisingly 12 IRQs and a laptop boots, but still some
>> > > problems. Please advise how to compose mainboard_picr_data/_intr_data
>> > > and also a intel_irq_routing_table, your help will be very much
>> > > appreciated.
>> > >
>> > > Best regards,
>> > > Mike Banon
>> _______________________________________________
>> coreboot mailing list -- coreboot@coreboot.org
>> To unsubscribe send an email to coreboot-leave@coreboot.org