On Thu, 2006-08-03 at 10:13 -0500, Richard Smith wrote:
hardware smbus problems. Which is good. I've still got that p2b so I'll test and see if I get the same results as you.
I pulled out my old p2b board and manged to find all the stuff to make it boot. Then ran the current V2 p2b target build.
Indeed it dumps the SPD out just fine. So yah! Thats good news. My V1 stuff must have had some other issue that kept the RAM from getting detected properly.
Good to hear you're getting the same results!
Since you straightened me on what to expect, I went ahead and changed the southbridge/i440bx to i82371eb, and recompiled all the 440bx targets I could find (successfully, except that the eaglelion/5bcm tried to look for a payload under /home/hamish, which for some reason didn't exist on my system :-). I've attached a patch for this - could you review and commit for me? I think it may require some svn magic to copy/remove the old 440bx directory and files - I'm not sure how well just applying the diffs here will work (I'm an svn newbie).
I'll tackle rebasing the RAM init on the e7501 next.