
Signed-off-by: Robert Millan <rmh@aybabtu.com>

The following files are copied from the repository:

  for i in Config.lb Options.lb cmos.layout \
    mptable.c irq_tables.c mainboard.c get_bus_conf.c cache_as_ram_auto.c ; do
    svn copy src/mainboard/asus/a8n_e/$i src/mainboard/asus/a8n5x/
  done
  svn copy targets/asus/a8n_e/Config.lb targets/asus/a8n5x/

Index: src/mainboard/asus/a8n5x/Config.lb
===================================================================
--- src/mainboard/asus/a8n5x/Config.lb	(revision 0)
+++ src/mainboard/asus/a8n5x/Config.lb	(working copy)
@@ -241,56 +241,28 @@
           device pci 0.0 on end			# HT
           device pci 1.0 on			# LPC
             chip superio/ite/it8712f		# Super I/O
-              device pnp 2e.0 off		# Floppy
+              device pnp 2e.7 off		# Floppy
                 io 0x60 = 0x3f0
                 irq 0x70 = 6
                 drq 0x74 = 2
               end
-              device pnp 2e.1 on		# Com1
+              device pnp 2e.8 on		# Com1
                 io 0x60 = 0x3f8
                 irq 0x70 = 4
               end
-              device pnp 2e.2 off		# Com2
-                io 0x60 = 0x2f8
-                irq 0x70 = 3
-              end
-              device pnp 2e.3 on		# Parallel port
+              device pnp 2e.9 on		# Parallel port
                 io 0x60 = 0x378
                 irq 0x70 = 7
+                drq 0x74 = 3
               end
-              device pnp 2e.4 on		# Environment controller
-                io 0x60 = 0x290
-                io 0x62 = 0x0000
-                irq 0x70 = 0x00
-              end
-              device pnp 2e.5 on		# PS/2 keyboard
+              device pnp 2e.a on		# PS/2 keyboard
                 io 0x60 = 0x60
                 io 0x62 = 0x64
                 irq 0x70 = 1
                 irq 0x71 = 2
               end
-              device pnp 2e.6 on		# PS/2 mouse
-                irq 0x70 = 12
-                irq 0x71 = 2
-              end
-              device pnp 2e.7 on		# GPIO config
-                # Set GPIO 1 & 2
-                io 0x25 = 0x0000
-                # Set GPIO 3 & 4
-                io 0x27 = 0x2540
-                # GPIO Polarity for Set 3
-                io 0xb2 = 0x2100
-                # GPIO Pin Internal Pull up for Set 3
-                io 0xba = 0x0100
-                # Simple I/O register config
-                io 0xc0 = 0x0000
-                io 0xc2 = 0x2540
-                io 0xc8 = 0x0000
-                io 0xca = 0x0500
-              end
-              device pnp 2e.8 off end		# Midi port
-              device pnp 2e.9 off end		# Game port
-              device pnp 2e.a off end		# IR
+              device pnp 2e.b off end		# Midi port
+              device pnp 2e.c off end		# Game port
             end
           end
           device pci 1.1 on			# SM 0
Index: targets/asus/a8n5x/Config.lb
===================================================================
--- targets/asus/a8n5x/Config.lb	(revision 0)
+++ targets/asus/a8n5x/Config.lb	(working copy)
@@ -19,8 +19,8 @@
 ## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 ##
 
-target asus_a8n_e
-mainboard asus/a8n_e
+target asus_a8n5x
+mainboard asus/a8n5x
 
 romimage "normal"
 	option USE_FAILOVER_IMAGE=0
