On Fri, Oct 16, 2009 at 2:28 PM, Hugh Greenberg hng@lanl.gov wrote:
I'm getting more output now with r4795:
Good. Thanks.
coreboot-2.3 Fri Oct 16 14:19:51 MDT 2009 starting... Enabling routing table for node 00 done. Enabling SMP settings
(0,1) link=01
(1,0) link=01 setup_remote_node: done Renaming current temporary node to 01 done. Enabling routing table for node 01 done. 02 nodes initialized. coherent_ht_finalize done SBLink=00 NC node|link=00 entering ht_optimize_link pos=0x8a, unfiltered freq_cap=0x8075 pos=0x8a, filtered freq_cap=0x35 pos=0xce, unfiltered freq_cap=0x35 freq_cap1=0x35, freq_cap2=0x15 dev1 old_freq=0x4, freq=0x4, needs_reset=0x0 dev2 old_freq=0x4, freq=0x4, needs_reset=0x0
This looks like a warm reset. Have you tried it from power on?
I have no idea why it would stop there. The next thing I would do is print out the routing table when it hangs.
Thanks, Myles